Commit | Line | Data |
e05e23b1 |
1 | package ExtUtils::MakeMaker; |
2 | |
57b1a898 |
3 | BEGIN {require 5.005_03;} |
4 | |
a884ca7c |
5 | $VERSION = "6.03"; |
f6d6199c |
6 | $Version_OK = "5.49"; # Makefiles older than $Version_OK will die |
7 | # (Will be checked from MakeMaker version 4.13 onwards) |
a884ca7c |
8 | ($Revision = substr(q$Revision: 1.63 $, 10)) =~ s/\s+$//; |
005c1a0e |
9 | |
8e07c86e |
10 | require Exporter; |
3b03c0f3 |
11 | use Config; |
12 | use Carp (); |
e05e23b1 |
13 | |
14 | use vars qw( |
f6d6199c |
15 | @ISA @EXPORT @EXPORT_OK |
16 | $ISA_TTY $Revision $VERSION $Verbose $Version_OK %Config |
e0678a30 |
17 | %Keep_after_flush %MM_Sections @Prepend_parent |
5e9e174b |
18 | %Recognized_Att_Keys @Get_from_Config @MM_Sections @Overridable |
19 | @Parent $PACKNAME |
f6d6199c |
20 | ); |
5e9e174b |
21 | use strict; |
005c1a0e |
22 | |
e05e23b1 |
23 | @ISA = qw(Exporter); |
24 | @EXPORT = qw(&WriteMakefile &writeMakefile $Verbose &prompt); |
f6d6199c |
25 | @EXPORT_OK = qw($VERSION &neatvalue &mkbootstrap &mksymlists); |
42793c05 |
26 | |
f6d6199c |
27 | # These will go away once the last of the Win32 & VMS specific code is |
28 | # purged. |
5e9e174b |
29 | my $Is_VMS = $^O eq 'VMS'; |
5e9e174b |
30 | my $Is_Win32 = $^O eq 'MSWin32'; |
3b03c0f3 |
31 | |
9ab29e2b |
32 | full_setup(); |
864a5fa8 |
33 | |
f6d6199c |
34 | require ExtUtils::MM; # Things like CPAN assume loading ExtUtils::MakeMaker |
35 | # will give them MM. |
e05e23b1 |
36 | |
45bc4d3a |
37 | require ExtUtils::MY; # XXX pre-5.8 versions of ExtUtils::Embed expect |
38 | # loading ExtUtils::MakeMaker will give them MY. |
39 | # This will go when Embed is it's own CPAN module. |
40 | |
f1387719 |
41 | |
3b03c0f3 |
42 | sub WriteMakefile { |
43 | Carp::croak "WriteMakefile: Need even number of args" if @_ % 2; |
f1387719 |
44 | |
f6d6199c |
45 | require ExtUtils::MY; |
3b03c0f3 |
46 | my %att = @_; |
69ff8adf |
47 | |
48 | _verify_att(\%att); |
49 | |
e0678a30 |
50 | my $mm = MM->new(\%att); |
51 | $mm->flush; |
52 | |
53 | return $mm; |
3b03c0f3 |
54 | } |
55 | |
69ff8adf |
56 | |
d5d4ec93 |
57 | # Basic signatures of the attributes WriteMakefile takes. Each is the |
58 | # reference type. Empty value indicate it takes a non-reference |
59 | # scalar. |
69ff8adf |
60 | my %Att_Sigs = |
61 | ( |
d5d4ec93 |
62 | ABSTRACT => '', |
63 | ABSTRACT_FROM => '', |
64 | AUTHOR => '', |
65 | BINARY_LOCATION => '', |
66 | C => 'array', |
67 | CCFLAGS => '', |
68 | CONFIG => 'array', |
69 | CONFIGURE => 'code', |
70 | DEFINE => '', |
71 | DIR => 'array', |
72 | DISTNAME => '', |
73 | DL_FUNCS => 'hash', |
74 | DL_VARS => 'array', |
75 | EXCLUDE_EXT => 'array', |
76 | EXE_FILES => 'array', |
77 | FIRST_MAKEFILE => '', |
78 | FULLPERL => '', |
79 | FULLPERLRUN => '', |
80 | FULLPERLRUNINST => '', |
81 | FUNCLIST => 'array', |
82 | H => 'array', |
83 | IMPORTS => 'hash', |
84 | INC => '', |
85 | INCLUDE_EXT => 'array', |
86 | INSTALLARCHLIB => '', |
87 | INSTALLBIN => '', |
88 | INSTALLDIRS => '', |
89 | INSTALLMAN1DIR => '', |
90 | INSTALLMAN3DIR => '', |
91 | INSTALLPRIVLIB => '', |
92 | INSTALLSCRIPT => '', |
93 | INSTALLSITEARCH => '', |
94 | INSTALLSITEBIN => '', |
95 | INSTALLSITELIB => '', |
96 | INSTALLSITEMAN1DIR => '', |
97 | INSTALLSITEMAN3DIR => '', |
98 | INSTALLVENDORARCH => '', |
99 | INSTALLVENDORBIN => '', |
100 | INSTALLVENDORLIB => '', |
101 | INSTALLVENDORMAN1DIR => '', |
102 | INSTALLVENDORMAN3DIR => '', |
103 | INST_ARCHLIB => '', |
104 | INST_BIN => '', |
105 | INST_LIB => '', |
106 | INST_MAN1DIR => '', |
107 | INST_MAN3DIR => '', |
108 | INST_SCRIPT => '', |
109 | _KEEP_AFTER_FLUSH => '', |
a884ca7c |
110 | LDDLFLAGS => '', |
d5d4ec93 |
111 | LDFROM => '', |
112 | LIB => '', |
113 | LIBPERL_A => '', |
114 | LIBS => ['array',''], |
115 | LINKTYPE => '', |
116 | MAKEAPERL => '', |
117 | MAKEFILE => '', |
118 | MAN1PODS => 'hash', |
119 | MAN3PODS => 'hash', |
120 | MAP_TARGET => '', |
121 | MYEXTLIB => '', |
122 | NAME => '', |
123 | NEEDS_LINKING => '', |
124 | NOECHO => '', |
125 | NORECURS => '', |
126 | NO_VC => '', |
127 | OBJECT => '', |
128 | OPTIMIZE => '', |
129 | PERL => '', |
130 | PERL_CORE => '', |
131 | PERLMAINCC => '', |
132 | PERL_ARCHLIB => '', |
133 | PERL_LIB => '', |
134 | PERL_MALLOC_OK => '', |
135 | PERLRUN => '', |
136 | PERLRUNINST => '', |
137 | PERL_SRC => '', |
138 | PERM_RW => '', |
139 | PERM_RWX => '', |
140 | PL_FILES => 'hash', |
141 | PM => 'hash', |
142 | PMLIBDIRS => 'array', |
143 | PM_FILTER => '', |
144 | POLLUTE => '', |
145 | PPM_INSTALL_EXEC => '', |
146 | PPM_INSTALL_SCRIPT => '', |
147 | PREFIX => '', |
148 | PREREQ_FATAL => '', |
149 | PREREQ_PM => 'hash', |
150 | PREREQ_PRINT => '', |
151 | PRINT_PREREQ => '', |
152 | SITEPREFIX => '', |
153 | SKIP => 'array', |
154 | TYPEMAPS => 'array', |
155 | VENDORPREFIX => '', |
156 | VERBINST => '', |
157 | VERSION => '', |
158 | VERSION_FROM => '', |
159 | XS => 'hash', |
160 | XSOPT => '', |
161 | XSPROTOARG => '', |
162 | XS_VERSION => '', |
69ff8adf |
163 | |
164 | clean => 'hash', |
165 | depend => 'hash', |
166 | dist => 'hash', |
167 | dynamic_lib=> 'hash', |
168 | linkext => 'hash', |
169 | macro => 'hash', |
170 | realclean => 'hash', |
171 | test => 'hash', |
172 | tool_autosplit => 'hash', |
173 | ); |
174 | |
69ff8adf |
175 | |
176 | sub _verify_att { |
177 | my($att) = @_; |
178 | |
179 | while( my($key, $val) = each %$att ) { |
180 | my $sig = $Att_Sigs{$key}; |
d5d4ec93 |
181 | unless( defined $sig ) { |
182 | warn "WARNING: $key is not a known parameter.\n"; |
183 | next; |
184 | } |
185 | |
186 | my @sigs = ref $sig ? @$sig : $sig; |
187 | my $given = lc ref $val; |
69ff8adf |
188 | unless( grep $given eq $_, @sigs ) { |
d5d4ec93 |
189 | my $takes = join " or ", map { $_ ne '' ? "$_ reference" |
190 | : "string/number" |
69ff8adf |
191 | } @sigs; |
d5d4ec93 |
192 | my $has = $given ne '' ? "$given reference" |
193 | : "string/number"; |
69ff8adf |
194 | warn "WARNING: $key takes a $takes not a $has.\n". |
195 | " Please inform the author.\n"; |
69ff8adf |
196 | } |
197 | } |
198 | } |
199 | |
f1387719 |
200 | sub prompt ($;$) { |
3b03c0f3 |
201 | my($mess,$def)=@_; |
f6d6199c |
202 | $ISA_TTY = -t STDIN && (-t STDOUT || !(-f STDOUT || -c STDOUT)) ; # Pipe? |
e0678a30 |
203 | Carp::confess("prompt function called without an argument") |
204 | unless defined $mess; |
f1387719 |
205 | my $dispdef = defined $def ? "[$def] " : " "; |
206 | $def = defined $def ? $def : ""; |
3b03c0f3 |
207 | my $ans; |
13bc20ff |
208 | local $|=1; |
f6d6199c |
209 | local $\; |
13bc20ff |
210 | print "$mess $dispdef"; |
9d05ba64 |
211 | if ($ISA_TTY && !$ENV{PERL_MM_USE_DEFAULT}) { |
f6d6199c |
212 | $ans = <STDIN>; |
213 | if( defined $ans ) { |
214 | chomp $ans; |
215 | } |
216 | else { # user hit ctrl-D |
217 | print "\n"; |
218 | } |
219 | } |
220 | else { |
221 | print "$def\n"; |
3b03c0f3 |
222 | } |
f6d6199c |
223 | return (!defined $ans || $ans eq '') ? $def : $ans; |
3b03c0f3 |
224 | } |
225 | |
e05e23b1 |
226 | sub eval_in_subdirs { |
227 | my($self) = @_; |
a8112c7f |
228 | use Cwd qw(cwd abs_path); |
f582e489 |
229 | my $pwd = cwd() || die "Can't figure out your cwd!"; |
230 | |
3593a55e |
231 | local @INC = map eval {abs_path($_) if -e} || $_, @INC; |
f6d6199c |
232 | push @INC, '.'; # '.' has to always be at the end of @INC |
e05e23b1 |
233 | |
5e9e174b |
234 | foreach my $dir (@{$self->{DIR}}){ |
f6d6199c |
235 | my($abs) = $self->catdir($pwd,$dir); |
236 | $self->eval_in_x($abs); |
e05e23b1 |
237 | } |
e05e23b1 |
238 | chdir $pwd; |
864a5fa8 |
239 | } |
42793c05 |
240 | |
e05e23b1 |
241 | sub eval_in_x { |
242 | my($self,$dir) = @_; |
6626a13a |
243 | chdir $dir or Carp::carp("Couldn't change to directory $dir: $!"); |
5e9e174b |
244 | |
f6d6199c |
245 | { |
246 | package main; |
247 | do './Makefile.PL'; |
248 | }; |
f1387719 |
249 | if ($@) { |
f6d6199c |
250 | # if ($@ =~ /prerequisites/) { |
251 | # die "MakeMaker WARNING: $@"; |
252 | # } else { |
253 | # warn "WARNING from evaluation of $dir/Makefile.PL: $@"; |
254 | # } |
45bc4d3a |
255 | die "ERROR from evaluation of $dir/Makefile.PL: $@"; |
f1387719 |
256 | } |
e05e23b1 |
257 | } |
258 | |
e05e23b1 |
259 | sub full_setup { |
260 | $Verbose ||= 0; |
3b03c0f3 |
261 | |
f1387719 |
262 | # package name for the classes into which the first object will be blessed |
3b03c0f3 |
263 | $PACKNAME = "PACK000"; |
264 | |
5e9e174b |
265 | my @attrib_help = qw/ |
3b03c0f3 |
266 | |
762efda7 |
267 | AUTHOR ABSTRACT ABSTRACT_FROM BINARY_LOCATION |
268 | C CAPI CCFLAGS CONFIG CONFIGURE DEFINE DIR DISTNAME DL_FUNCS DL_VARS |
75e2e551 |
269 | EXCLUDE_EXT EXE_FILES FIRST_MAKEFILE |
270 | FULLPERL FULLPERLRUN FULLPERLRUNINST |
271 | FUNCLIST H IMPORTS |
45bc4d3a |
272 | INST_ARCHLIB INST_SCRIPT INST_BIN INST_LIB INST_MAN1DIR INST_MAN3DIR |
5c161494 |
273 | INSTALLDIRS |
274 | PREFIX SITEPREFIX VENDORPREFIX |
275 | INSTALLPRIVLIB INSTALLSITELIB INSTALLVENDORLIB |
276 | INSTALLARCHLIB INSTALLSITEARCH INSTALLVENDORARCH |
45bc4d3a |
277 | INSTALLBIN INSTALLSITEBIN INSTALLVENDORBIN |
278 | INSTALLMAN1DIR INSTALLMAN3DIR |
279 | INSTALLSITEMAN1DIR INSTALLSITEMAN3DIR |
280 | INSTALLVENDORMAN1DIR INSTALLVENDORMAN3DIR |
281 | INSTALLSCRIPT |
5c161494 |
282 | PERL_LIB PERL_ARCHLIB |
283 | SITELIBEXP SITEARCHEXP |
284 | INC INCLUDE_EXT LDFROM LIB LIBPERL_A LIBS |
f1387719 |
285 | LINKTYPE MAKEAPERL MAKEFILE MAN1PODS MAN3PODS MAP_TARGET MYEXTLIB |
ee13e175 |
286 | PERL_MALLOC_OK |
762efda7 |
287 | NAME NEEDS_LINKING NOECHO NORECURS NO_VC OBJECT OPTIMIZE PERL PERLMAINCC |
5c161494 |
288 | PERLRUN PERLRUNINST PERL_CORE |
289 | PERL_SRC PERM_RW PERM_RWX |
131aa089 |
290 | PL_FILES PM PM_FILTER PMLIBDIRS POLLUTE PPM_INSTALL_EXEC |
5c161494 |
291 | PPM_INSTALL_SCRIPT PREREQ_FATAL PREREQ_PM PREREQ_PRINT PRINT_PREREQ |
e0678a30 |
292 | SKIP TYPEMAPS VERSION VERSION_FROM XS XSOPT XSPROTOARG |
f1387719 |
293 | XS_VERSION clean depend dist dynamic_lib linkext macro realclean |
762efda7 |
294 | tool_autosplit |
084592ab |
295 | MACPERL_SRC MACPERL_LIB MACLIBS_68K MACLIBS_PPC MACLIBS_SC MACLIBS_MRC |
296 | MACLIBS_ALL_68K MACLIBS_ALL_PPC MACLIBS_SHARED |
f6d6199c |
297 | /; |
3b03c0f3 |
298 | |
875fa795 |
299 | # IMPORTS is used under OS/2 and Win32 |
f1387719 |
300 | |
301 | # @Overridable is close to @MM_Sections but not identical. The |
302 | # order is important. Many subroutines declare macros. These |
303 | # depend on each other. Let's try to collect the macros up front, |
304 | # then pasthru, then the rules. |
305 | |
306 | # MM_Sections are the sections we have to call explicitly |
307 | # in Overridable we have subroutines that are used indirectly |
3b03c0f3 |
308 | |
e05e23b1 |
309 | |
310 | @MM_Sections = |
f6d6199c |
311 | qw( |
3b03c0f3 |
312 | |
f1387719 |
313 | post_initialize const_config constants tool_autosplit tool_xsubpp |
314 | tools_other dist macro depend cflags const_loadlibs const_cccmd |
315 | post_constants |
316 | |
317 | pasthru |
318 | |
b86a2fa7 |
319 | c_o xs_c xs_o top_targets linkext dlsyms dynamic dynamic_bs |
f6d6199c |
320 | dynamic_lib static static_lib manifypods processPL |
cae6c631 |
321 | installbin subdirs |
f1387719 |
322 | clean realclean dist_basics dist_core dist_dir dist_test dist_ci |
8f993c78 |
323 | install force perldepend makefile staticmake test ppd |
3b03c0f3 |
324 | |
f6d6199c |
325 | ); # loses section ordering |
e05e23b1 |
326 | |
3b03c0f3 |
327 | @Overridable = @MM_Sections; |
f1387719 |
328 | push @Overridable, qw[ |
329 | |
2366100d |
330 | dir_target libscan makeaperl needs_linking perm_rw perm_rwx |
75e2e551 |
331 | subdir_x test_via_harness test_via_script init_PERL |
f6d6199c |
332 | ]; |
3b03c0f3 |
333 | |
f1387719 |
334 | push @MM_Sections, qw[ |
3b03c0f3 |
335 | |
f1387719 |
336 | pm_to_blib selfdocument |
337 | |
f6d6199c |
338 | ]; |
f1387719 |
339 | |
340 | # Postamble needs to be the last that was always the case |
341 | push @MM_Sections, "postamble"; |
342 | push @Overridable, "postamble"; |
e05e23b1 |
343 | |
344 | # All sections are valid keys. |
3b03c0f3 |
345 | @Recognized_Att_Keys{@MM_Sections} = (1) x @MM_Sections; |
e05e23b1 |
346 | |
347 | # we will use all these variables in the Makefile |
348 | @Get_from_Config = |
f6d6199c |
349 | qw( |
350 | ar cc cccdlflags ccdlflags dlext dlsrc ld lddlflags ldflags libc |
351 | lib_ext obj_ext osname osvers ranlib sitelibexp sitearchexp so |
352 | exe_ext full_ar |
353 | ); |
e05e23b1 |
354 | |
5e9e174b |
355 | foreach my $item (@attrib_help){ |
f6d6199c |
356 | $Recognized_Att_Keys{$item} = 1; |
e05e23b1 |
357 | } |
5e9e174b |
358 | foreach my $item (@Get_from_Config) { |
f6d6199c |
359 | $Recognized_Att_Keys{uc $item} = $Config{$item}; |
360 | print "Attribute '\U$item\E' => '$Config{$item}'\n" |
361 | if ($Verbose >= 2); |
e05e23b1 |
362 | } |
363 | |
364 | # |
3b03c0f3 |
365 | # When we eval a Makefile.PL in a subdirectory, that one will ask |
366 | # us (the parent) for the values and will prepend "..", so that |
367 | # all files to be installed end up below OUR ./blib |
e05e23b1 |
368 | # |
e0678a30 |
369 | @Prepend_parent = qw( |
370 | INST_BIN INST_LIB INST_ARCHLIB INST_SCRIPT |
f6d6199c |
371 | MAP_TARGET INST_MAN1DIR INST_MAN3DIR PERL_SRC |
372 | PERL FULLPERL |
373 | ); |
e05e23b1 |
374 | |
3b03c0f3 |
375 | my @keep = qw/ |
f6d6199c |
376 | NEEDS_LINKING HAS_LINK_CODE |
377 | /; |
3b03c0f3 |
378 | @Keep_after_flush{@keep} = (1) x @keep; |
e05e23b1 |
379 | } |
42793c05 |
380 | |
8e07c86e |
381 | sub writeMakefile { |
382 | die <<END; |
232e078e |
383 | |
8e07c86e |
384 | The extension you are trying to build apparently is rather old and |
385 | most probably outdated. We detect that from the fact, that a |
386 | subroutine "writeMakefile" is called, and this subroutine is not |
387 | supported anymore since about October 1994. |
40000a8c |
388 | |
4633a7c4 |
389 | Please contact the author or look into CPAN (details about CPAN can be |
390 | found in the FAQ and at http:/www.perl.com) for a more recent version |
391 | of the extension. If you're really desperate, you can try to change |
392 | the subroutine name from writeMakefile to WriteMakefile and rerun |
393 | 'perl Makefile.PL', but you're most probably left alone, when you do |
394 | so. |
42793c05 |
395 | |
8e07c86e |
396 | The MakeMaker team |
1aef975c |
397 | |
42793c05 |
398 | END |
8e07c86e |
399 | } |
42793c05 |
400 | |
f6d6199c |
401 | sub new { |
8e07c86e |
402 | my($class,$self) = @_; |
403 | my($key); |
42793c05 |
404 | |
88d69b28 |
405 | if ("@ARGV" =~ /\bPREREQ_PRINT\b/) { |
f6d6199c |
406 | require Data::Dumper; |
88d69b28 |
407 | print Data::Dumper->Dump([$self->{PREREQ_PM}], [qw(PREREQ_PM)]); |
f6d6199c |
408 | } |
88d69b28 |
409 | |
410 | # PRINT_PREREQ is RedHatism. |
411 | if ("@ARGV" =~ /\bPRINT_PREREQ\b/) { |
f6d6199c |
412 | print join(" ", map { "perl($_)>=$self->{PREREQ_PM}->{$_} " } sort keys %{$self->{PREREQ_PM}}), "\n"; |
413 | exit 0; |
88d69b28 |
414 | } |
415 | |
e05e23b1 |
416 | print STDOUT "MakeMaker (v$VERSION)\n" if $Verbose; |
8e07c86e |
417 | if (-f "MANIFEST" && ! -f "Makefile"){ |
f6d6199c |
418 | check_manifest(); |
1aef975c |
419 | } |
42793c05 |
420 | |
8e07c86e |
421 | $self = {} unless (defined $self); |
005c1a0e |
422 | |
864a5fa8 |
423 | check_hints($self); |
4633a7c4 |
424 | |
c3be8c6e |
425 | my %configure_att; # record &{$self->{CONFIGURE}} attributes |
8e07c86e |
426 | my(%initial_att) = %$self; # record initial attributes |
005c1a0e |
427 | |
a4260cbc |
428 | my(%unsatisfied) = (); |
5e9e174b |
429 | foreach my $prereq (sort keys %{$self->{PREREQ_PM}}) { |
f6d6199c |
430 | eval "require $prereq"; |
431 | |
e0678a30 |
432 | my $pr_version = $prereq->VERSION || 0; |
433 | |
f6d6199c |
434 | if ($@) { |
435 | warn sprintf "Warning: prerequisite %s %s not found.\n", |
436 | $prereq, $self->{PREREQ_PM}{$prereq} |
437 | unless $self->{PREREQ_FATAL}; |
438 | $unsatisfied{$prereq} = 'not installed'; |
e0678a30 |
439 | } elsif ($pr_version < $self->{PREREQ_PM}->{$prereq} ){ |
45bc4d3a |
440 | warn sprintf "Warning: prerequisite %s %s not found. We have %s.\n", |
f6d6199c |
441 | $prereq, $self->{PREREQ_PM}{$prereq}, |
e0678a30 |
442 | ($pr_version || 'unknown version') |
f6d6199c |
443 | unless $self->{PREREQ_FATAL}; |
444 | $unsatisfied{$prereq} = $self->{PREREQ_PM}->{$prereq} ? |
445 | $self->{PREREQ_PM}->{$prereq} : 'unknown version' ; |
446 | } |
f1387719 |
447 | } |
a4260cbc |
448 | if (%unsatisfied && $self->{PREREQ_FATAL}){ |
f6d6199c |
449 | my $failedprereqs = join ', ', map {"$_ $unsatisfied{$_}"} |
450 | keys %unsatisfied; |
451 | die qq{MakeMaker FATAL: prerequisites not found ($failedprereqs)\n |
452 | Please install these modules first and rerun 'perl Makefile.PL'.\n}; |
a4260cbc |
453 | } |
f1387719 |
454 | |
8e07c86e |
455 | if (defined $self->{CONFIGURE}) { |
f6d6199c |
456 | if (ref $self->{CONFIGURE} eq 'CODE') { |
457 | %configure_att = %{&{$self->{CONFIGURE}}}; |
458 | $self = { %$self, %configure_att }; |
459 | } else { |
460 | Carp::croak "Attribute 'CONFIGURE' to WriteMakefile() not a code reference\n"; |
461 | } |
005c1a0e |
462 | } |
a0d0e21e |
463 | |
8e07c86e |
464 | # This is for old Makefiles written pre 5.00, will go away |
465 | if ( Carp::longmess("") =~ /runsubdirpl/s ){ |
f6d6199c |
466 | Carp::carp("WARNING: Please rerun 'perl Makefile.PL' to regenerate your Makefiles\n"); |
8e07c86e |
467 | } |
5d94fbed |
468 | |
ccd13d1e |
469 | my $newclass = ++$PACKNAME; |
f6d6199c |
470 | local @Parent = @Parent; # Protect against non-local exits |
8e07c86e |
471 | { |
f6d6199c |
472 | no strict 'refs'; |
473 | print "Blessing Object into class [$newclass]\n" if $Verbose>=2; |
474 | mv_all_methods("MY",$newclass); |
475 | bless $self, $newclass; |
476 | push @Parent, $self; |
477 | require ExtUtils::MY; |
478 | @{"$newclass\:\:ISA"} = 'MM'; |
8e07c86e |
479 | } |
5d94fbed |
480 | |
e05e23b1 |
481 | if (defined $Parent[-2]){ |
f6d6199c |
482 | $self->{PARENT} = $Parent[-2]; |
483 | my $key; |
e0678a30 |
484 | for $key (@Prepend_parent) { |
f6d6199c |
485 | next unless defined $self->{PARENT}{$key}; |
486 | $self->{$key} = $self->{PARENT}{$key}; |
487 | unless ($^O eq 'VMS' && $key =~ /PERL$/) { |
488 | $self->{$key} = $self->catdir("..",$self->{$key}) |
489 | unless $self->file_name_is_absolute($self->{$key}); |
490 | } else { |
491 | # PERL or FULLPERL will be a command verb or even a |
492 | # command with an argument instead of a full file |
493 | # specification under VMS. So, don't turn the command |
494 | # into a filespec, but do add a level to the path of |
495 | # the argument if not already absolute. |
496 | my @cmd = split /\s+/, $self->{$key}; |
497 | $cmd[1] = $self->catfile('[-]',$cmd[1]) |
498 | unless (@cmd < 2) || $self->file_name_is_absolute($cmd[1]); |
499 | $self->{$key} = join(' ', @cmd); |
500 | } |
501 | } |
502 | if ($self->{PARENT}) { |
503 | $self->{PARENT}->{CHILDREN}->{$newclass} = $self; |
504 | foreach my $opt (qw(POLLUTE PERL_CORE)) { |
505 | if (exists $self->{PARENT}->{$opt} |
506 | and not exists $self->{$opt}) |
507 | { |
508 | # inherit, but only if already unspecified |
509 | $self->{$opt} = $self->{PARENT}->{$opt}; |
510 | } |
511 | } |
512 | } |
513 | my @fm = grep /^FIRST_MAKEFILE=/, @ARGV; |
514 | parse_args($self,@fm) if @fm; |
8e07c86e |
515 | } else { |
f6d6199c |
516 | parse_args($self,split(' ', $ENV{PERL_MM_OPT} || ''),@ARGV); |
8e07c86e |
517 | } |
a0d0e21e |
518 | |
8e07c86e |
519 | $self->{NAME} ||= $self->guess_name; |
a0d0e21e |
520 | |
8e07c86e |
521 | ($self->{NAME_SYM} = $self->{NAME}) =~ s/\W+/_/g; |
a0d0e21e |
522 | |
8e07c86e |
523 | $self->init_main(); |
524 | |
0d8023a2 |
525 | if (! $self->{PERL_SRC} ) { |
f6d6199c |
526 | require VMS::Filespec if $Is_VMS; |
527 | my($pthinks) = $self->canonpath($INC{'Config.pm'}); |
528 | my($cthinks) = $self->catfile($Config{'archlibexp'},'Config.pm'); |
529 | $pthinks = VMS::Filespec::vmsify($pthinks) if $Is_VMS; |
530 | if ($pthinks ne $cthinks && |
531 | !($Is_Win32 and lc($pthinks) eq lc($cthinks))) { |
3e3baf6d |
532 | print "Have $pthinks expected $cthinks\n"; |
f6d6199c |
533 | if ($Is_Win32) { |
534 | $pthinks =~ s![/\\]Config\.pm$!!i; $pthinks =~ s!.*[/\\]!!; |
535 | } |
536 | else { |
537 | $pthinks =~ s!/Config\.pm$!!; $pthinks =~ s!.*/!!; |
538 | } |
539 | print STDOUT <<END unless $self->{UNINSTALLED_PERL}; |
540 | Your perl and your Config.pm seem to have different ideas about the |
541 | architecture they are running on. |
8e07c86e |
542 | Perl thinks: [$pthinks] |
e05e23b1 |
543 | Config says: [$Config{archname}] |
f6d6199c |
544 | This may or may not cause problems. Please check your installation of perl |
545 | if you have problems building this extension. |
005c1a0e |
546 | END |
f6d6199c |
547 | } |
005c1a0e |
548 | } |
549 | |
8e07c86e |
550 | $self->init_dirscan(); |
551 | $self->init_others(); |
e0678a30 |
552 | $self->init_PERM(); |
6071deed |
553 | my($argv) = neatvalue(\@ARGV); |
554 | $argv =~ s/^\[/(/; |
555 | $argv =~ s/\]$/)/; |
75f92628 |
556 | |
8e07c86e |
557 | push @{$self->{RESULT}}, <<END; |
558 | # This Makefile is for the $self->{NAME} extension to perl. |
559 | # |
e05e23b1 |
560 | # It was generated automatically by MakeMaker version |
561 | # $VERSION (Revision: $Revision) from the contents of |
562 | # Makefile.PL. Don't edit this file, edit Makefile.PL instead. |
8e07c86e |
563 | # |
f6d6199c |
564 | # ANY CHANGES MADE HERE WILL BE LOST! |
8e07c86e |
565 | # |
6071deed |
566 | # MakeMaker ARGV: $argv |
567 | # |
8e07c86e |
568 | # MakeMaker Parameters: |
569 | END |
a0d0e21e |
570 | |
5e9e174b |
571 | foreach my $key (sort keys %initial_att){ |
f6d6199c |
572 | my($v) = neatvalue($initial_att{$key}); |
573 | $v =~ s/(CODE|HASH|ARRAY|SCALAR)\([\dxa-f]+\)/$1\(...\)/; |
574 | $v =~ tr/\n/ /s; |
575 | push @{$self->{RESULT}}, "# $key => $v"; |
42793c05 |
576 | } |
c3be8c6e |
577 | undef %initial_att; # free memory |
578 | |
579 | if (defined $self->{CONFIGURE}) { |
580 | push @{$self->{RESULT}}, <<END; |
581 | |
582 | # MakeMaker 'CONFIGURE' Parameters: |
583 | END |
584 | if (scalar(keys %configure_att) > 0) { |
5e9e174b |
585 | foreach my $key (sort keys %configure_att){ |
c3be8c6e |
586 | my($v) = neatvalue($configure_att{$key}); |
587 | $v =~ s/(CODE|HASH|ARRAY|SCALAR)\([\dxa-f]+\)/$1\(...\)/; |
588 | $v =~ tr/\n/ /s; |
589 | push @{$self->{RESULT}}, "# $key => $v"; |
590 | } |
591 | } |
592 | else |
593 | { |
594 | push @{$self->{RESULT}}, "# no values returned"; |
595 | } |
596 | undef %configure_att; # free memory |
597 | } |
a0d0e21e |
598 | |
8e07c86e |
599 | # turn the SKIP array into a SKIPHASH hash |
600 | my (%skip,$skip); |
601 | for $skip (@{$self->{SKIP} || []}) { |
f6d6199c |
602 | $self->{SKIPHASH}{$skip} = 1; |
8e07c86e |
603 | } |
3b03c0f3 |
604 | delete $self->{SKIP}; # free memory |
605 | |
606 | if ($self->{PARENT}) { |
f6d6199c |
607 | for (qw/install dist dist_basics dist_core dist_dir dist_test dist_ci/) { |
608 | $self->{SKIPHASH}{$_} = 1; |
609 | } |
3b03c0f3 |
610 | } |
42793c05 |
611 | |
8e07c86e |
612 | # We run all the subdirectories now. They don't have much to query |
613 | # from the parent, but the parent has to query them: if they need linking! |
8e07c86e |
614 | unless ($self->{NORECURS}) { |
f6d6199c |
615 | $self->eval_in_subdirs if @{$self->{DIR}}; |
42793c05 |
616 | } |
a0d0e21e |
617 | |
5e9e174b |
618 | foreach my $section ( @MM_Sections ){ |
f6d6199c |
619 | print "Processing Makefile '$section' section\n" if ($Verbose >= 2); |
620 | my($skipit) = $self->skipcheck($section); |
621 | if ($skipit){ |
622 | push @{$self->{RESULT}}, "\n# --- MakeMaker $section section $skipit."; |
623 | } else { |
624 | my(%a) = %{$self->{$section} || {}}; |
625 | push @{$self->{RESULT}}, "\n# --- MakeMaker $section section:"; |
626 | push @{$self->{RESULT}}, "# " . join ", ", %a if $Verbose && %a; |
627 | push @{$self->{RESULT}}, $self->nicetext($self->$section( %a )); |
628 | } |
232e078e |
629 | } |
8e07c86e |
630 | |
e05e23b1 |
631 | push @{$self->{RESULT}}, "\n# End."; |
8e07c86e |
632 | |
e05e23b1 |
633 | $self; |
232e078e |
634 | } |
635 | |
1b171b8d |
636 | sub WriteEmptyMakefile { |
a8112c7f |
637 | Carp::croak "WriteEmptyMakefile: Need even number of args" if @_ % 2; |
a8112c7f |
638 | |
639 | my %att = @_; |
640 | my $self = MM->new(\%att); |
641 | if (-f "$self->{MAKEFILE}.old") { |
642 | chmod 0666, "$self->{MAKEFILE}.old"; |
643 | unlink "$self->{MAKEFILE}.old" or warn "unlink $self->{MAKEFILE}.old: $!"; |
644 | } |
645 | rename $self->{MAKEFILE}, "$self->{MAKEFILE}.old" |
646 | or warn "rename $self->{MAKEFILE} $self->{MAKEFILE}.old: $!" |
647 | if -f $self->{MAKEFILE}; |
57b1a898 |
648 | open MF, '>'.$self->{MAKEFILE} or die "open $self->{MAKEFILE} for write: $!"; |
a8112c7f |
649 | print MF <<'EOP'; |
1b171b8d |
650 | all: |
651 | |
652 | clean: |
653 | |
654 | install: |
655 | |
656 | makemakerdflt: |
657 | |
658 | test: |
659 | |
660 | EOP |
a8112c7f |
661 | close MF or die "close $self->{MAKEFILE} for write: $!"; |
1b171b8d |
662 | } |
663 | |
e05e23b1 |
664 | sub check_manifest { |
665 | print STDOUT "Checking if your kit is complete...\n"; |
3b03c0f3 |
666 | require ExtUtils::Manifest; |
5e9e174b |
667 | # avoid warning |
668 | $ExtUtils::Manifest::Quiet = $ExtUtils::Manifest::Quiet = 1; |
669 | my(@missed) = ExtUtils::Manifest::manicheck(); |
670 | if (@missed) { |
f6d6199c |
671 | print STDOUT "Warning: the following files are missing in your kit:\n"; |
672 | print "\t", join "\n\t", @missed; |
673 | print STDOUT "\n"; |
674 | print STDOUT "Please inform the author.\n"; |
8e07c86e |
675 | } else { |
f6d6199c |
676 | print STDOUT "Looks good\n"; |
8e07c86e |
677 | } |
8e07c86e |
678 | } |
679 | |
e05e23b1 |
680 | sub parse_args{ |
681 | my($self, @args) = @_; |
5e9e174b |
682 | foreach (@args) { |
f6d6199c |
683 | unless (m/(.*?)=(.*)/) { |
684 | help(),exit 1 if m/^help$/; |
685 | ++$Verbose if m/^verb/; |
686 | next; |
687 | } |
688 | my($name, $value) = ($1, $2); |
689 | if ($value =~ m/^~(\w+)?/) { # tilde with optional username |
690 | $value =~ s [^~(\w*)] |
691 | [$1 ? |
692 | ((getpwnam($1))[7] || "~$1") : |
693 | (getpwuid($>))[7] |
694 | ]ex; |
695 | } |
696 | $self->{uc($name)} = $value; |
8e07c86e |
697 | } |
8e07c86e |
698 | |
e05e23b1 |
699 | # catch old-style 'potential_libs' and inform user how to 'upgrade' |
700 | if (defined $self->{potential_libs}){ |
f6d6199c |
701 | my($msg)="'potential_libs' => '$self->{potential_libs}' should be"; |
702 | if ($self->{potential_libs}){ |
703 | print STDOUT "$msg changed to:\n\t'LIBS' => ['$self->{potential_libs}']\n"; |
704 | } else { |
705 | print STDOUT "$msg deleted.\n"; |
706 | } |
707 | $self->{LIBS} = [$self->{potential_libs}]; |
708 | delete $self->{potential_libs}; |
8e07c86e |
709 | } |
e05e23b1 |
710 | # catch old-style 'ARMAYBE' and inform user how to 'upgrade' |
711 | if (defined $self->{ARMAYBE}){ |
f6d6199c |
712 | my($armaybe) = $self->{ARMAYBE}; |
713 | print STDOUT "ARMAYBE => '$armaybe' should be changed to:\n", |
714 | "\t'dynamic_lib' => {ARMAYBE => '$armaybe'}\n"; |
715 | my(%dl) = %{$self->{dynamic_lib} || {}}; |
716 | $self->{dynamic_lib} = { %dl, ARMAYBE => $armaybe}; |
717 | delete $self->{ARMAYBE}; |
8e07c86e |
718 | } |
e05e23b1 |
719 | if (defined $self->{LDTARGET}){ |
f6d6199c |
720 | print STDOUT "LDTARGET should be changed to LDFROM\n"; |
721 | $self->{LDFROM} = $self->{LDTARGET}; |
722 | delete $self->{LDTARGET}; |
8e07c86e |
723 | } |
e05e23b1 |
724 | # Turn a DIR argument on the command line into an array |
725 | if (defined $self->{DIR} && ref \$self->{DIR} eq 'SCALAR') { |
f6d6199c |
726 | # So they can choose from the command line, which extensions they want |
727 | # the grep enables them to have some colons too much in case they |
728 | # have to build a list with the shell |
729 | $self->{DIR} = [grep $_, split ":", $self->{DIR}]; |
8e07c86e |
730 | } |
f1387719 |
731 | # Turn a INCLUDE_EXT argument on the command line into an array |
732 | if (defined $self->{INCLUDE_EXT} && ref \$self->{INCLUDE_EXT} eq 'SCALAR') { |
f6d6199c |
733 | $self->{INCLUDE_EXT} = [grep $_, split '\s+', $self->{INCLUDE_EXT}]; |
f1387719 |
734 | } |
735 | # Turn a EXCLUDE_EXT argument on the command line into an array |
736 | if (defined $self->{EXCLUDE_EXT} && ref \$self->{EXCLUDE_EXT} eq 'SCALAR') { |
f6d6199c |
737 | $self->{EXCLUDE_EXT} = [grep $_, split '\s+', $self->{EXCLUDE_EXT}]; |
f1387719 |
738 | } |
5e9e174b |
739 | |
740 | foreach my $mmkey (sort keys %$self){ |
f6d6199c |
741 | print STDOUT " $mmkey => ", neatvalue($self->{$mmkey}), "\n" if $Verbose; |
742 | print STDOUT "'$mmkey' is not a known MakeMaker parameter name.\n" |
743 | unless exists $Recognized_Att_Keys{$mmkey}; |
e05e23b1 |
744 | } |
f1387719 |
745 | $| = 1 if $Verbose; |
e05e23b1 |
746 | } |
8e07c86e |
747 | |
e05e23b1 |
748 | sub check_hints { |
749 | my($self) = @_; |
750 | # We allow extension-specific hints files. |
864a5fa8 |
751 | |
e05e23b1 |
752 | return unless -d "hints"; |
8e07c86e |
753 | |
e05e23b1 |
754 | # First we look for the best hintsfile we have |
f1387719 |
755 | my($hint)="${^O}_$Config{osvers}"; |
e05e23b1 |
756 | $hint =~ s/\./_/g; |
757 | $hint =~ s/_$//; |
758 | return unless $hint; |
fed7345c |
759 | |
e05e23b1 |
760 | # Also try without trailing minor version numbers. |
761 | while (1) { |
f6d6199c |
762 | last if -f "hints/$hint.pl"; # found |
e05e23b1 |
763 | } continue { |
f6d6199c |
764 | last unless $hint =~ s/_[^_]*$//; # nothing to cut off |
e05e23b1 |
765 | } |
6626a13a |
766 | my $hint_file = "hints/$hint.pl"; |
767 | |
768 | return unless -f $hint_file; # really there |
fed7345c |
769 | |
f6d6199c |
770 | _run_hintfile($self, $hint_file); |
771 | } |
772 | |
773 | sub _run_hintfile { |
57b1a898 |
774 | no strict 'vars'; |
f6d6199c |
775 | local($self) = shift; # make $self available to the hint file. |
776 | my($hint_file) = shift; |
777 | |
75e2e551 |
778 | local $@; |
39234879 |
779 | print STDERR "Processing hints file $hint_file\n"; |
75e2e551 |
780 | my $ret = do "./$hint_file"; |
781 | unless( defined $ret ) { |
782 | print STDERR $@ if $@; |
783 | } |
e05e23b1 |
784 | } |
8e07c86e |
785 | |
e05e23b1 |
786 | sub mv_all_methods { |
787 | my($from,$to) = @_; |
5e9e174b |
788 | no strict 'refs'; |
e05e23b1 |
789 | my($symtab) = \%{"${from}::"}; |
fed7345c |
790 | |
e05e23b1 |
791 | # Here you see the *current* list of methods that are overridable |
792 | # from Makefile.PL via MY:: subroutines. As of VERSION 5.07 I'm |
793 | # still trying to reduce the list to some reasonable minimum -- |
794 | # because I want to make it easier for the user. A.K. |
40000a8c |
795 | |
57b1a898 |
796 | local $SIG{__WARN__} = sub { |
797 | # can't use 'no warnings redefined', 5.6 only |
798 | warn @_ unless $_[0] =~ /^Subroutine .* redefined/ |
799 | }; |
5e9e174b |
800 | foreach my $method (@Overridable) { |
fed7345c |
801 | |
f6d6199c |
802 | # We cannot say "next" here. Nick might call MY->makeaperl |
803 | # which isn't defined right now |
804 | |
805 | # Above statement was written at 4.23 time when Tk-b8 was |
806 | # around. As Tk-b9 only builds with 5.002something and MM 5 is |
807 | # standard, we try to enable the next line again. It was |
808 | # commented out until MM 5.23 |
809 | |
810 | next unless defined &{"${from}::$method"}; |
fed7345c |
811 | |
f6d6199c |
812 | *{"${to}::$method"} = \&{"${from}::$method"}; |
3b03c0f3 |
813 | |
f6d6199c |
814 | # delete would do, if we were sure, nobody ever called |
815 | # MY->makeaperl directly |
fed7345c |
816 | |
f6d6199c |
817 | # delete $symtab->{$method}; |
8e07c86e |
818 | |
f6d6199c |
819 | # If we delete a method, then it will be undefined and cannot |
820 | # be called. But as long as we have Makefile.PLs that rely on |
821 | # %MY:: being intact, we have to fill the hole with an |
822 | # inheriting method: |
fed7345c |
823 | |
f6d6199c |
824 | eval "package MY; sub $method { shift->SUPER::$method(\@_); }"; |
5d94fbed |
825 | } |
826 | |
e05e23b1 |
827 | # We have to clean out %INC also, because the current directory is |
828 | # changed frequently and Graham Barr prefers to get his version |
829 | # out of a History.pl file which is "required" so woudn't get |
830 | # loaded again in another extension requiring a History.pl |
a0d0e21e |
831 | |
f1387719 |
832 | # With perl5.002_01 the deletion of entries in %INC caused Tk-b11 |
833 | # to core dump in the middle of a require statement. The required |
834 | # file was Tk/MMutil.pm. The consequence is, we have to be |
835 | # extremely careful when we try to give perl a reason to reload a |
836 | # library with same name. The workaround prefers to drop nothing |
837 | # from %INC and teach the writers not to use such libraries. |
838 | |
839 | # my $inc; |
840 | # foreach $inc (keys %INC) { |
f6d6199c |
841 | # #warn "***$inc*** deleted"; |
842 | # delete $INC{$inc}; |
f1387719 |
843 | # } |
8e07c86e |
844 | } |
845 | |
3b03c0f3 |
846 | sub skipcheck { |
8e07c86e |
847 | my($self) = shift; |
e05e23b1 |
848 | my($section) = @_; |
849 | if ($section eq 'dynamic') { |
f6d6199c |
850 | print STDOUT "Warning (non-fatal): Target 'dynamic' depends on targets ", |
851 | "in skipped section 'dynamic_bs'\n" |
e05e23b1 |
852 | if $self->{SKIPHASH}{dynamic_bs} && $Verbose; |
853 | print STDOUT "Warning (non-fatal): Target 'dynamic' depends on targets ", |
f6d6199c |
854 | "in skipped section 'dynamic_lib'\n" |
e05e23b1 |
855 | if $self->{SKIPHASH}{dynamic_lib} && $Verbose; |
8e07c86e |
856 | } |
e05e23b1 |
857 | if ($section eq 'dynamic_lib') { |
858 | print STDOUT "Warning (non-fatal): Target '\$(INST_DYNAMIC)' depends on ", |
f6d6199c |
859 | "targets in skipped section 'dynamic_bs'\n" |
e05e23b1 |
860 | if $self->{SKIPHASH}{dynamic_bs} && $Verbose; |
861 | } |
862 | if ($section eq 'static') { |
863 | print STDOUT "Warning (non-fatal): Target 'static' depends on targets ", |
f6d6199c |
864 | "in skipped section 'static_lib'\n" |
e05e23b1 |
865 | if $self->{SKIPHASH}{static_lib} && $Verbose; |
8e07c86e |
866 | } |
e05e23b1 |
867 | return 'skipped' if $self->{SKIPHASH}{$section}; |
868 | return ''; |
8e07c86e |
869 | } |
870 | |
e05e23b1 |
871 | sub flush { |
872 | my $self = shift; |
873 | my($chunk); |
3b03c0f3 |
874 | local *FH; |
e05e23b1 |
875 | print STDOUT "Writing $self->{MAKEFILE} for $self->{NAME}\n"; |
8e07c86e |
876 | |
e05e23b1 |
877 | unlink($self->{MAKEFILE}, "MakeMaker.tmp", $Is_VMS ? 'Descrip.MMS' : ''); |
3b03c0f3 |
878 | open(FH,">MakeMaker.tmp") or die "Unable to open MakeMaker.tmp: $!"; |
8e07c86e |
879 | |
e05e23b1 |
880 | for $chunk (@{$self->{RESULT}}) { |
f6d6199c |
881 | print FH "$chunk\n"; |
8e07c86e |
882 | } |
e05e23b1 |
883 | |
3b03c0f3 |
884 | close FH; |
e05e23b1 |
885 | my($finalname) = $self->{MAKEFILE}; |
886 | rename("MakeMaker.tmp", $finalname); |
887 | chmod 0644, $finalname unless $Is_VMS; |
3b03c0f3 |
888 | |
e0678a30 |
889 | if ($self->{PARENT} && !$self->{_KEEP_AFTER_FLUSH}) { |
f6d6199c |
890 | foreach (keys %$self) { # safe memory |
891 | delete $self->{$_} unless $Keep_after_flush{$_}; |
892 | } |
3b03c0f3 |
893 | } |
894 | |
e05e23b1 |
895 | system("$Config::Config{eunicefix} $finalname") unless $Config::Config{eunicefix} eq ":"; |
40000a8c |
896 | } |
897 | |
e05e23b1 |
898 | # The following mkbootstrap() is only for installations that are calling |
899 | # the pre-4.1 mkbootstrap() from their old Makefiles. This MakeMaker |
900 | # writes Makefiles, that use ExtUtils::Mkbootstrap directly. |
901 | sub mkbootstrap { |
902 | die <<END; |
903 | !!! Your Makefile has been built such a long time ago, !!! |
904 | !!! that is unlikely to work with current MakeMaker. !!! |
905 | !!! Please rebuild your Makefile !!! |
906 | END |
8e07c86e |
907 | } |
005c1a0e |
908 | |
e05e23b1 |
909 | # Ditto for mksymlists() as of MakeMaker 5.17 |
910 | sub mksymlists { |
911 | die <<END; |
912 | !!! Your Makefile has been built such a long time ago, !!! |
913 | !!! that is unlikely to work with current MakeMaker. !!! |
914 | !!! Please rebuild your Makefile !!! |
915 | END |
4633a7c4 |
916 | } |
917 | |
e05e23b1 |
918 | sub neatvalue { |
919 | my($v) = @_; |
920 | return "undef" unless defined $v; |
921 | my($t) = ref $v; |
922 | return "q[$v]" unless $t; |
923 | if ($t eq 'ARRAY') { |
f6d6199c |
924 | my(@m, @neat); |
925 | push @m, "["; |
926 | foreach my $elem (@$v) { |
927 | push @neat, "q[$elem]"; |
928 | } |
929 | push @m, join ", ", @neat; |
930 | push @m, "]"; |
931 | return join "", @m; |
e05e23b1 |
932 | } |
933 | return "$v" unless $t eq 'HASH'; |
934 | my(@m, $key, $val); |
3b03c0f3 |
935 | while (($key,$val) = each %$v){ |
f6d6199c |
936 | last unless defined $key; # cautious programming in case (undef,undef) is true |
937 | push(@m,"$key=>".neatvalue($val)) ; |
3b03c0f3 |
938 | } |
e05e23b1 |
939 | return "{ ".join(', ',@m)." }"; |
4e68a208 |
940 | } |
941 | |
e05e23b1 |
942 | sub selfdocument { |
943 | my($self) = @_; |
944 | my(@m); |
945 | if ($Verbose){ |
f6d6199c |
946 | push @m, "\n# Full list of MakeMaker attribute values:"; |
947 | foreach my $key (sort keys %$self){ |
948 | next if $key eq 'RESULT' || $key =~ /^[A-Z][a-z]/; |
949 | my($v) = neatvalue($self->{$key}); |
950 | $v =~ s/(CODE|HASH|ARRAY|SCALAR)\([\dxa-f]+\)/$1\(...\)/; |
951 | $v =~ tr/\n/ /s; |
952 | push @m, "# $key => $v"; |
953 | } |
e05e23b1 |
954 | } |
955 | join "\n", @m; |
956 | } |
4e68a208 |
957 | |
3b03c0f3 |
958 | 1; |
959 | |
960 | __END__ |
005c1a0e |
961 | |
962 | =head1 NAME |
963 | |
964 | ExtUtils::MakeMaker - create an extension Makefile |
965 | |
966 | =head1 SYNOPSIS |
967 | |
e0678a30 |
968 | use ExtUtils::MakeMaker; |
005c1a0e |
969 | |
e0678a30 |
970 | WriteMakefile( ATTRIBUTE => VALUE [, ...] ); |
8e07c86e |
971 | |
005c1a0e |
972 | =head1 DESCRIPTION |
973 | |
974 | This utility is designed to write a Makefile for an extension module |
975 | from a Makefile.PL. It is based on the Makefile.SH model provided by |
976 | Andy Dougherty and the perl5-porters. |
977 | |
978 | It splits the task of generating the Makefile into several subroutines |
979 | that can be individually overridden. Each subroutine returns the text |
980 | it wishes to have written to the Makefile. |
981 | |
f1387719 |
982 | MakeMaker is object oriented. Each directory below the current |
e0678a30 |
983 | directory that contains a Makefile.PL is treated as a separate |
f1387719 |
984 | object. This makes it possible to write an unlimited number of |
985 | Makefiles with a single invocation of WriteMakefile(). |
8e07c86e |
986 | |
f1387719 |
987 | =head2 How To Write A Makefile.PL |
8e07c86e |
988 | |
bab2b58e |
989 | The short answer is: Don't. |
990 | |
991 | Always begin with h2xs. |
992 | Always begin with h2xs! |
993 | ALWAYS BEGIN WITH H2XS! |
994 | |
995 | even if you're not building around a header file, and even if you |
996 | don't have an XS component. |
997 | |
998 | Run h2xs(1) before you start thinking about writing a module. For so |
999 | called pm-only modules that consist of C<*.pm> files only, h2xs has |
1000 | the C<-X> switch. This will generate dummy files of all kinds that are |
1001 | useful for the module developer. |
8e07c86e |
1002 | |
f1387719 |
1003 | The medium answer is: |
8e07c86e |
1004 | |
f1387719 |
1005 | use ExtUtils::MakeMaker; |
1006 | WriteMakefile( NAME => "Foo::Bar" ); |
8e07c86e |
1007 | |
bab2b58e |
1008 | The long answer is the rest of the manpage :-) |
005c1a0e |
1009 | |
1010 | =head2 Default Makefile Behaviour |
1011 | |
f1387719 |
1012 | The generated Makefile enables the user of the extension to invoke |
005c1a0e |
1013 | |
1014 | perl Makefile.PL # optionally "perl Makefile.PL verbose" |
1015 | make |
8e07c86e |
1016 | make test # optionally set TEST_VERBOSE=1 |
1017 | make install # See below |
005c1a0e |
1018 | |
1019 | The Makefile to be produced may be altered by adding arguments of the |
e05e23b1 |
1020 | form C<KEY=VALUE>. E.g. |
005c1a0e |
1021 | |
e05e23b1 |
1022 | perl Makefile.PL PREFIX=/tmp/myperl5 |
005c1a0e |
1023 | |
1024 | Other interesting targets in the generated Makefile are |
1025 | |
1026 | make config # to check if the Makefile is up-to-date |
8e07c86e |
1027 | make clean # delete local temp files (Makefile gets renamed) |
1028 | make realclean # delete derived files (including ./blib) |
e05e23b1 |
1029 | make ci # check in all the files in the MANIFEST file |
005c1a0e |
1030 | make dist # see below the Distribution Support section |
1031 | |
e05e23b1 |
1032 | =head2 make test |
1033 | |
bab2b58e |
1034 | MakeMaker checks for the existence of a file named F<test.pl> in the |
d5d4ec93 |
1035 | current directory and if it exists it execute the script with the |
1036 | proper set of perl C<-I> options. |
e05e23b1 |
1037 | |
1038 | MakeMaker also checks for any files matching glob("t/*.t"). It will |
d5d4ec93 |
1039 | execute all matching files in alphabetical order via the |
1040 | L<Test::Harness> module with the C<-I> switches set correctly. |
1041 | |
1042 | If you'd like to see the raw output of your tests, set the |
1043 | C<TEST_VERBOSE> variable to true. |
1044 | |
1045 | make test TEST_VERBOSE=1 |
e05e23b1 |
1046 | |
bab2b58e |
1047 | =head2 make testdb |
1048 | |
1049 | A useful variation of the above is the target C<testdb>. It runs the |
1050 | test under the Perl debugger (see L<perldebug>). If the file |
1051 | F<test.pl> exists in the current directory, it is used for the test. |
1052 | |
d5d4ec93 |
1053 | If you want to debug some other testfile, set the C<TEST_FILE> variable |
bab2b58e |
1054 | thusly: |
1055 | |
1056 | make testdb TEST_FILE=t/mytest.t |
1057 | |
1058 | By default the debugger is called using C<-d> option to perl. If you |
d5d4ec93 |
1059 | want to specify some other option, set the C<TESTDB_SW> variable: |
bab2b58e |
1060 | |
1061 | make testdb TESTDB_SW=-Dx |
1062 | |
e05e23b1 |
1063 | =head2 make install |
005c1a0e |
1064 | |
8e07c86e |
1065 | make alone puts all relevant files into directories that are named by |
f6d6199c |
1066 | the macros INST_LIB, INST_ARCHLIB, INST_SCRIPT, INST_MAN1DIR and |
1067 | INST_MAN3DIR. All these default to something below ./blib if you are |
1068 | I<not> building below the perl source directory. If you I<are> |
1069 | building below the perl source, INST_LIB and INST_ARCHLIB default to |
1070 | ../../lib, and INST_SCRIPT is not defined. |
005c1a0e |
1071 | |
e05e23b1 |
1072 | The I<install> target of the generated Makefile copies the files found |
1073 | below each of the INST_* directories to their INSTALL* |
1074 | counterparts. Which counterparts are chosen depends on the setting of |
1075 | INSTALLDIRS according to the following table: |
005c1a0e |
1076 | |
f6d6199c |
1077 | INSTALLDIRS set to |
5c161494 |
1078 | perl site vendor |
e05e23b1 |
1079 | |
5c161494 |
1080 | PREFIX SITEPREFIX VENDORPREFIX |
1081 | INST_ARCHLIB INSTALLARCHLIB INSTALLSITEARCH INSTALLVENDORARCH |
1082 | INST_LIB INSTALLPRIVLIB INSTALLSITELIB INSTALLVENDORLIB |
1083 | INST_BIN INSTALLBIN INSTALLSITEBIN INSTALLVENDORBIN |
1084 | INST_SCRIPT INSTALLSCRIPT INSTALLSCRIPT INSTALLSCRIPT |
1085 | INST_MAN1DIR INSTALLMAN1DIR INSTALLSITEMAN1DIR INSTALLVENDORMAN1DIR |
1086 | INST_MAN3DIR INSTALLMAN3DIR INSTALLSITEMAN3DIR INSTALLVENDORMAN3DIR |
005c1a0e |
1087 | |
8e07c86e |
1088 | The INSTALL... macros in turn default to their %Config |
1089 | ($Config{installprivlib}, $Config{installarchlib}, etc.) counterparts. |
005c1a0e |
1090 | |
3b03c0f3 |
1091 | You can check the values of these variables on your system with |
1092 | |
bab2b58e |
1093 | perl '-V:install.*' |
3b03c0f3 |
1094 | |
f1387719 |
1095 | And to check the sequence in which the library directories are |
1096 | searched by perl, run |
005c1a0e |
1097 | |
f1387719 |
1098 | perl -le 'print join $/, @INC' |
005c1a0e |
1099 | |
005c1a0e |
1100 | |
bab2b58e |
1101 | =head2 PREFIX and LIB attribute |
1102 | |
1103 | PREFIX and LIB can be used to set several INSTALL* attributes in one |
1104 | go. The quickest way to install a module in a non-standard place might |
1105 | be |
1106 | |
f6d6199c |
1107 | perl Makefile.PL PREFIX=~ |
005c1a0e |
1108 | |
f6d6199c |
1109 | This will install all files in the module under your home directory, |
1110 | with man pages and libraries going into an appropriate place (usually |
1111 | ~/man and ~/lib). |
bab2b58e |
1112 | |
1113 | Another way to specify many INSTALL directories with a single |
f6d6199c |
1114 | parameter is LIB. |
005c1a0e |
1115 | |
f6d6199c |
1116 | perl Makefile.PL LIB=~/lib |
005c1a0e |
1117 | |
f6d6199c |
1118 | This will install the module's architecture-independent files into |
1119 | ~/lib, the architecture-dependent files into ~/lib/$archname. |
005c1a0e |
1120 | |
bab2b58e |
1121 | Note, that in both cases the tilde expansion is done by MakeMaker, not |
e35b8f9e |
1122 | by perl by default, nor by make. |
1123 | |
f6d6199c |
1124 | Conflicts between parameters LIB, PREFIX and the various INSTALL* |
1125 | arguments are resolved so that: |
e35b8f9e |
1126 | |
1127 | =over 4 |
1128 | |
1129 | =item * |
1130 | |
1131 | setting LIB overrides any setting of INSTALLPRIVLIB, INSTALLARCHLIB, |
1132 | INSTALLSITELIB, INSTALLSITEARCH (and they are not affected by PREFIX); |
1133 | |
1134 | =item * |
1135 | |
1136 | without LIB, setting PREFIX replaces the initial C<$Config{prefix}> |
1137 | part of those INSTALL* arguments, even if the latter are explicitly |
1138 | set (but are set to still start with C<$Config{prefix}>). |
1139 | |
1140 | =back |
005c1a0e |
1141 | |
f6d6199c |
1142 | If the user has superuser privileges, and is not working on AFS or |
1143 | relatives, then the defaults for INSTALLPRIVLIB, INSTALLARCHLIB, |
1144 | INSTALLSCRIPT, etc. will be appropriate, and this incantation will be |
1145 | the best: |
005c1a0e |
1146 | |
e0678a30 |
1147 | perl Makefile.PL; |
1148 | make; |
1149 | make test |
005c1a0e |
1150 | make install |
1151 | |
8e07c86e |
1152 | make install per default writes some documentation of what has been |
e05e23b1 |
1153 | done into the file C<$(INSTALLARCHLIB)/perllocal.pod>. This feature |
1154 | can be bypassed by calling make pure_install. |
8e07c86e |
1155 | |
1156 | =head2 AFS users |
1157 | |
1158 | will have to specify the installation directories as these most |
1159 | probably have changed since perl itself has been installed. They will |
1160 | have to do this by calling |
1161 | |
e05e23b1 |
1162 | perl Makefile.PL INSTALLSITELIB=/afs/here/today \ |
f6d6199c |
1163 | INSTALLSCRIPT=/afs/there/now INSTALLMAN3DIR=/afs/for/manpages |
8e07c86e |
1164 | make |
1165 | |
e05e23b1 |
1166 | Be careful to repeat this procedure every time you recompile an |
1167 | extension, unless you are sure the AFS installation directories are |
1168 | still valid. |
005c1a0e |
1169 | |
8e07c86e |
1170 | =head2 Static Linking of a new Perl Binary |
005c1a0e |
1171 | |
1172 | An extension that is built with the above steps is ready to use on |
1173 | systems supporting dynamic loading. On systems that do not support |
1174 | dynamic loading, any newly created extension has to be linked together |
1175 | with the available resources. MakeMaker supports the linking process |
1176 | by creating appropriate targets in the Makefile whenever an extension |
1177 | is built. You can invoke the corresponding section of the makefile with |
1178 | |
1179 | make perl |
1180 | |
1181 | That produces a new perl binary in the current directory with all |
da7f727a |
1182 | extensions linked in that can be found in INST_ARCHLIB, SITELIBEXP, |
e05e23b1 |
1183 | and PERL_ARCHLIB. To do that, MakeMaker writes a new Makefile, on |
1184 | UNIX, this is called Makefile.aperl (may be system dependent). If you |
1185 | want to force the creation of a new perl, it is recommended, that you |
1186 | delete this Makefile.aperl, so the directories are searched-through |
1187 | for linkable libraries again. |
005c1a0e |
1188 | |
1189 | The binary can be installed into the directory where perl normally |
1190 | resides on your machine with |
1191 | |
1192 | make inst_perl |
1193 | |
1194 | To produce a perl binary with a different name than C<perl>, either say |
1195 | |
1196 | perl Makefile.PL MAP_TARGET=myperl |
1197 | make myperl |
1198 | make inst_perl |
1199 | |
1200 | or say |
1201 | |
1202 | perl Makefile.PL |
1203 | make myperl MAP_TARGET=myperl |
1204 | make inst_perl MAP_TARGET=myperl |
1205 | |
1206 | In any case you will be prompted with the correct invocation of the |
1207 | C<inst_perl> target that installs the new binary into INSTALLBIN. |
1208 | |
8e07c86e |
1209 | make inst_perl per default writes some documentation of what has been |
1210 | done into the file C<$(INSTALLARCHLIB)/perllocal.pod>. This |
1211 | can be bypassed by calling make pure_inst_perl. |
005c1a0e |
1212 | |
e05e23b1 |
1213 | Warning: the inst_perl: target will most probably overwrite your |
1214 | existing perl binary. Use with care! |
005c1a0e |
1215 | |
8e07c86e |
1216 | Sometimes you might want to build a statically linked perl although |
1217 | your system supports dynamic loading. In this case you may explicitly |
1218 | set the linktype with the invocation of the Makefile.PL or make: |
1219 | |
1220 | perl Makefile.PL LINKTYPE=static # recommended |
1221 | |
1222 | or |
1223 | |
1224 | make LINKTYPE=static # works on most systems |
1225 | |
005c1a0e |
1226 | =head2 Determination of Perl Library and Installation Locations |
1227 | |
1228 | MakeMaker needs to know, or to guess, where certain things are |
e05e23b1 |
1229 | located. Especially INST_LIB and INST_ARCHLIB (where to put the files |
1230 | during the make(1) run), PERL_LIB and PERL_ARCHLIB (where to read |
1231 | existing modules from), and PERL_INC (header files and C<libperl*.*>). |
005c1a0e |
1232 | |
1233 | Extensions may be built either using the contents of the perl source |
e05e23b1 |
1234 | directory tree or from the installed perl library. The recommended way |
1235 | is to build extensions after you have run 'make install' on perl |
1236 | itself. You can do that in any directory on your hard disk that is not |
1237 | below the perl source tree. The support for extensions below the ext |
1238 | directory of the perl distribution is only good for the standard |
1239 | extensions that come with perl. |
005c1a0e |
1240 | |
1241 | If an extension is being built below the C<ext/> directory of the perl |
e05e23b1 |
1242 | source then MakeMaker will set PERL_SRC automatically (e.g., |
1243 | C<../..>). If PERL_SRC is defined and the extension is recognized as |
1244 | a standard extension, then other variables default to the following: |
005c1a0e |
1245 | |
1246 | PERL_INC = PERL_SRC |
1247 | PERL_LIB = PERL_SRC/lib |
1248 | PERL_ARCHLIB = PERL_SRC/lib |
1249 | INST_LIB = PERL_LIB |
1250 | INST_ARCHLIB = PERL_ARCHLIB |
1251 | |
1252 | If an extension is being built away from the perl source then MakeMaker |
1253 | will leave PERL_SRC undefined and default to using the installed copy |
1254 | of the perl library. The other variables default to the following: |
1255 | |
e05e23b1 |
1256 | PERL_INC = $archlibexp/CORE |
1257 | PERL_LIB = $privlibexp |
1258 | PERL_ARCHLIB = $archlibexp |
1259 | INST_LIB = ./blib/lib |
1260 | INST_ARCHLIB = ./blib/arch |
005c1a0e |
1261 | |
1262 | If perl has not yet been installed then PERL_SRC can be defined on the |
1263 | command line as shown in the previous section. |
1264 | |
005c1a0e |
1265 | |
f1387719 |
1266 | =head2 Which architecture dependent directory? |
005c1a0e |
1267 | |
f1387719 |
1268 | If you don't want to keep the defaults for the INSTALL* macros, |
1269 | MakeMaker helps you to minimize the typing needed: the usual |
1270 | relationship between INSTALLPRIVLIB and INSTALLARCHLIB is determined |
1271 | by Configure at perl compilation time. MakeMaker supports the user who |
1272 | sets INSTALLPRIVLIB. If INSTALLPRIVLIB is set, but INSTALLARCHLIB not, |
1273 | then MakeMaker defaults the latter to be the same subdirectory of |
1274 | INSTALLPRIVLIB as Configure decided for the counterparts in %Config , |
1275 | otherwise it defaults to INSTALLPRIVLIB. The same relationship holds |
1276 | for INSTALLSITELIB and INSTALLSITEARCH. |
005c1a0e |
1277 | |
f1387719 |
1278 | MakeMaker gives you much more freedom than needed to configure |
1279 | internal variables and get different results. It is worth to mention, |
1280 | that make(1) also lets you configure most of the variables that are |
1281 | used in the Makefile. But in the majority of situations this will not |
a7665c5e |
1282 | be necessary, and should only be done if the author of a package |
f1387719 |
1283 | recommends it (or you know what you're doing). |
005c1a0e |
1284 | |
e05e23b1 |
1285 | =head2 Using Attributes and Parameters |
005c1a0e |
1286 | |
a884ca7c |
1287 | The following attributes may be specified as arguments to WriteMakefile() |
1288 | or as NAME=VALUE pairs on the command line. |
005c1a0e |
1289 | |
875fa795 |
1290 | =over 2 |
005c1a0e |
1291 | |
875fa795 |
1292 | =item ABSTRACT |
1293 | |
1294 | One line description of the module. Will be included in PPD file. |
1295 | |
1296 | =item ABSTRACT_FROM |
1297 | |
1298 | Name of the file that contains the package description. MakeMaker looks |
1299 | for a line in the POD matching /^($package\s-\s)(.*)/. This is typically |
1300 | the first line in the "=head1 NAME" section. $2 becomes the abstract. |
1301 | |
e35b8f9e |
1302 | =item AUTHOR |
1303 | |
1304 | String containing name (and email address) of package author(s). Is used |
1305 | in PPD (Perl Package Description) files for PPM (Perl Package Manager). |
1306 | |
875fa795 |
1307 | =item BINARY_LOCATION |
1308 | |
1309 | Used when creating PPD files for binary packages. It can be set to a |
1310 | full or relative path or URL to the binary archive for a particular |
1311 | architecture. For example: |
1312 | |
f6d6199c |
1313 | perl Makefile.PL BINARY_LOCATION=x86/Agent.tar.gz |
875fa795 |
1314 | |
1315 | builds a PPD package that references a binary of the C<Agent> package, |
20e08411 |
1316 | located in the C<x86> directory relative to the PPD itself. |
8e07c86e |
1317 | |
864a5fa8 |
1318 | =item C |
8e07c86e |
1319 | |
864a5fa8 |
1320 | Ref to array of *.c file names. Initialised from a directory scan |
1321 | and the values portion of the XS attribute hash. This is not |
1322 | currently used by MakeMaker but may be handy in Makefile.PLs. |
8e07c86e |
1323 | |
84902520 |
1324 | =item CCFLAGS |
1325 | |
1326 | String that will be included in the compiler call command line between |
1327 | the arguments INC and OPTIMIZE. |
1328 | |
864a5fa8 |
1329 | =item CONFIG |
8e07c86e |
1330 | |
864a5fa8 |
1331 | Arrayref. E.g. [qw(archname manext)] defines ARCHNAME & MANEXT from |
1332 | config.sh. MakeMaker will add to CONFIG the following values anyway: |
1333 | ar |
1334 | cc |
1335 | cccdlflags |
1336 | ccdlflags |
1337 | dlext |
1338 | dlsrc |
1339 | ld |
1340 | lddlflags |
1341 | ldflags |
1342 | libc |
1343 | lib_ext |
1344 | obj_ext |
1345 | ranlib |
e05e23b1 |
1346 | sitelibexp |
1347 | sitearchexp |
864a5fa8 |
1348 | so |
8e07c86e |
1349 | |
1350 | =item CONFIGURE |
1351 | |
e05e23b1 |
1352 | CODE reference. The subroutine should return a hash reference. The |
1fef88e7 |
1353 | hash may contain further attributes, e.g. {LIBS =E<gt> ...}, that have to |
8e07c86e |
1354 | be determined by some evaluation method. |
1355 | |
864a5fa8 |
1356 | =item DEFINE |
8e07c86e |
1357 | |
864a5fa8 |
1358 | Something like C<"-DHAVE_UNISTD_H"> |
8e07c86e |
1359 | |
864a5fa8 |
1360 | =item DIR |
8e07c86e |
1361 | |
864a5fa8 |
1362 | Ref to array of subdirectories containing Makefile.PLs e.g. [ 'sdbm' |
1363 | ] in ext/SDBM_File |
8e07c86e |
1364 | |
864a5fa8 |
1365 | =item DISTNAME |
8e07c86e |
1366 | |
e05e23b1 |
1367 | Your name for distributing the package (by tar file). This defaults to |
864a5fa8 |
1368 | NAME above. |
8e07c86e |
1369 | |
864a5fa8 |
1370 | =item DL_FUNCS |
8e07c86e |
1371 | |
875fa795 |
1372 | Hashref of symbol names for routines to be made available as universal |
1373 | symbols. Each key/value pair consists of the package name and an |
1374 | array of routine names in that package. Used only under AIX, OS/2, |
1375 | VMS and Win32 at present. The routine names supplied will be expanded |
1376 | in the same way as XSUB names are expanded by the XS() macro. |
1377 | Defaults to |
8e07c86e |
1378 | |
864a5fa8 |
1379 | {"$(NAME)" => ["boot_$(NAME)" ] } |
8e07c86e |
1380 | |
864a5fa8 |
1381 | e.g. |
8e07c86e |
1382 | |
864a5fa8 |
1383 | {"RPC" => [qw( boot_rpcb rpcb_gettime getnetconfigent )], |
1384 | "NetconfigPtr" => [ 'DESTROY'] } |
8e07c86e |
1385 | |
875fa795 |
1386 | Please see the L<ExtUtils::Mksymlists> documentation for more information |
1387 | about the DL_FUNCS, DL_VARS and FUNCLIST attributes. |
1388 | |
864a5fa8 |
1389 | =item DL_VARS |
8e07c86e |
1390 | |
875fa795 |
1391 | Array of symbol names for variables to be made available as universal symbols. |
1392 | Used only under AIX, OS/2, VMS and Win32 at present. Defaults to []. |
1393 | (e.g. [ qw(Foo_version Foo_numstreams Foo_tree ) ]) |
8e07c86e |
1394 | |
f1387719 |
1395 | =item EXCLUDE_EXT |
1396 | |
1397 | Array of extension names to exclude when doing a static build. This |
1398 | is ignored if INCLUDE_EXT is present. Consult INCLUDE_EXT for more |
1399 | details. (e.g. [ qw( Socket POSIX ) ] ) |
1400 | |
1401 | This attribute may be most useful when specified as a string on the |
de592821 |
1402 | command line: perl Makefile.PL EXCLUDE_EXT='Socket Safe' |
f1387719 |
1403 | |
864a5fa8 |
1404 | =item EXE_FILES |
8e07c86e |
1405 | |
864a5fa8 |
1406 | Ref to array of executable files. The files will be copied to the |
f1387719 |
1407 | INST_SCRIPT directory. Make realclean will delete them from there |
864a5fa8 |
1408 | again. |
8e07c86e |
1409 | |
864a5fa8 |
1410 | =item FIRST_MAKEFILE |
1411 | |
1412 | The name of the Makefile to be produced. Defaults to the contents of |
1413 | MAKEFILE, but can be overridden. This is used for the second Makefile |
1414 | that will be produced for the MAP_TARGET. |
1415 | |
1416 | =item FULLPERL |
8e07c86e |
1417 | |
75e2e551 |
1418 | Perl binary able to run this extension, load XS modules, etc... |
1419 | |
1420 | =item FULLPERLRUN |
1421 | |
1422 | Like PERLRUN, except it uses FULLPERL. |
1423 | |
1424 | =item FULLPERLRUNINST |
1425 | |
1426 | Like PERLRUNINST, except it uses FULLPERL. |
864a5fa8 |
1427 | |
762efda7 |
1428 | =item FUNCLIST |
1429 | |
1430 | This provides an alternate means to specify function names to be |
1431 | exported from the extension. Its value is a reference to an |
1432 | array of function names to be exported by the extension. These |
1433 | names are passed through unaltered to the linker options file. |
1434 | |
864a5fa8 |
1435 | =item H |
1436 | |
1437 | Ref to array of *.h file names. Similar to C. |
1438 | |
84902520 |
1439 | =item IMPORTS |
1440 | |
875fa795 |
1441 | This attribute is used to specify names to be imported into the |
69ff8adf |
1442 | extension. Takes a hash ref. |
1443 | |
1444 | It is only used on OS/2 and Win32. |
84902520 |
1445 | |
864a5fa8 |
1446 | =item INC |
1447 | |
1448 | Include file dirs eg: C<"-I/usr/5include -I/path/to/inc"> |
1449 | |
f1387719 |
1450 | =item INCLUDE_EXT |
1451 | |
1452 | Array of extension names to be included when doing a static build. |
1453 | MakeMaker will normally build with all of the installed extensions when |
1454 | doing a static build, and that is usually the desired behavior. If |
1455 | INCLUDE_EXT is present then MakeMaker will build only with those extensions |
1456 | which are explicitly mentioned. (e.g. [ qw( Socket POSIX ) ]) |
1457 | |
1458 | It is not necessary to mention DynaLoader or the current extension when |
1459 | filling in INCLUDE_EXT. If the INCLUDE_EXT is mentioned but is empty then |
1460 | only DynaLoader and the current extension will be included in the build. |
1461 | |
1462 | This attribute may be most useful when specified as a string on the |
de592821 |
1463 | command line: perl Makefile.PL INCLUDE_EXT='POSIX Socket Devel::Peek' |
f1387719 |
1464 | |
864a5fa8 |
1465 | =item INSTALLARCHLIB |
1466 | |
e05e23b1 |
1467 | Used by 'make install', which copies files from INST_ARCHLIB to this |
1468 | directory if INSTALLDIRS is set to perl. |
864a5fa8 |
1469 | |
1470 | =item INSTALLBIN |
1471 | |
5c161494 |
1472 | Directory to install binary files (e.g. tkperl) into if |
1473 | INSTALLDIRS=perl. |
e05e23b1 |
1474 | |
1475 | =item INSTALLDIRS |
1476 | |
5c161494 |
1477 | Determines which of the sets of installation directories to choose: |
1478 | perl, site or vendor. Defaults to site. |
8e07c86e |
1479 | |
1480 | =item INSTALLMAN1DIR |
1481 | |
1482 | =item INSTALLMAN3DIR |
1483 | |
5c161494 |
1484 | These directories get the man pages at 'make install' time if |
1485 | INSTALLDIRS=perl. Defaults to $Config{installman*dir}. |
8e07c86e |
1486 | |
5c161494 |
1487 | If set to 'none', no man pages will be installed. |
e0678a30 |
1488 | |
864a5fa8 |
1489 | =item INSTALLPRIVLIB |
8e07c86e |
1490 | |
e05e23b1 |
1491 | Used by 'make install', which copies files from INST_LIB to this |
1492 | directory if INSTALLDIRS is set to perl. |
1493 | |
5c161494 |
1494 | Defaults to $Config{installprivlib}. |
1495 | |
f1387719 |
1496 | =item INSTALLSCRIPT |
1497 | |
1498 | Used by 'make install' which copies files from INST_SCRIPT to this |
1499 | directory. |
1500 | |
875fa795 |
1501 | =item INSTALLSITEARCH |
e05e23b1 |
1502 | |
875fa795 |
1503 | Used by 'make install', which copies files from INST_ARCHLIB to this |
e05e23b1 |
1504 | directory if INSTALLDIRS is set to site (default). |
1505 | |
5c161494 |
1506 | =item INSTALLSITEBIN |
1507 | |
1508 | Used by 'make install', which copies files from INST_BIN to this |
1509 | directory if INSTALLDIRS is set to site (default). |
1510 | |
875fa795 |
1511 | =item INSTALLSITELIB |
e05e23b1 |
1512 | |
875fa795 |
1513 | Used by 'make install', which copies files from INST_LIB to this |
e05e23b1 |
1514 | directory if INSTALLDIRS is set to site (default). |
8e07c86e |
1515 | |
5c161494 |
1516 | =item INSTALLSITEMAN1DIR |
1517 | |
1518 | =item INSTALLSITEMAN3DIR |
1519 | |
1520 | These directories get the man pages at 'make install' time if |
1521 | INSTALLDIRS=site (default). Defaults to |
1522 | $(SITEPREFIX)/man/man$(MAN*EXT). |
1523 | |
1524 | If set to 'none', no man pages will be installed. |
1525 | |
1526 | =item INSTALLVENDORARCH |
1527 | |
1528 | Used by 'make install', which copies files from INST_ARCHLIB to this |
1529 | directory if INSTALLDIRS is set to vendor. |
1530 | |
1531 | =item INSTALLVENDORBIN |
1532 | |
1533 | Used by 'make install', which copies files from INST_BIN to this |
1534 | directory if INSTALLDIRS is set to vendor. |
1535 | |
1536 | =item INSTALLVENDORLIB |
1537 | |
1538 | Used by 'make install', which copies files from INST_LIB to this |
1539 | directory if INSTALLDIRS is set to vendor. |
1540 | |
1541 | =item INSTALLVENDORMAN1DIR |
1542 | |
1543 | =item INSTALLVENDORMAN3DIR |
1544 | |
1545 | These directories get the man pages at 'make install' time if |
1546 | INSTALLDIRS=vendor. Defaults to $(VENDORPREFIX)/man/man$(MAN*EXT). |
1547 | |
1548 | If set to 'none', no man pages will be installed. |
1549 | |
864a5fa8 |
1550 | =item INST_ARCHLIB |
8e07c86e |
1551 | |
864a5fa8 |
1552 | Same as INST_LIB for architecture dependent files. |
8e07c86e |
1553 | |
f1387719 |
1554 | =item INST_BIN |
1555 | |
1556 | Directory to put real binary files during 'make'. These will be copied |
1557 | to INSTALLBIN during 'make install' |
1558 | |
e35b8f9e |
1559 | =item INST_LIB |
1560 | |
1561 | Directory where we put library files of this extension while building |
1562 | it. |
1563 | |
864a5fa8 |
1564 | =item INST_MAN1DIR |
8e07c86e |
1565 | |
864a5fa8 |
1566 | Directory to hold the man pages at 'make' time |
8e07c86e |
1567 | |
864a5fa8 |
1568 | =item INST_MAN3DIR |
8e07c86e |
1569 | |
864a5fa8 |
1570 | Directory to hold the man pages at 'make' time |
8e07c86e |
1571 | |
f1387719 |
1572 | =item INST_SCRIPT |
1573 | |
1574 | Directory, where executable files should be installed during |
c3fed81c |
1575 | 'make'. Defaults to "./blib/script", just to have a dummy location during |
f1387719 |
1576 | testing. make install will copy the files in INST_SCRIPT to |
1577 | INSTALLSCRIPT. |
1578 | |
a884ca7c |
1579 | =item LDDLFLAGS |
1580 | |
1581 | Any special flags that might need to be passed to ld to create a |
1582 | shared library suitable for dynamic loading. It is up to the makefile |
1583 | to use it. (See L<Config/lddlflags>) |
1584 | |
1585 | Defaults to $Config{lddlflags}. |
1586 | |
864a5fa8 |
1587 | =item LDFROM |
8e07c86e |
1588 | |
69ff8adf |
1589 | Defaults to "$(OBJECT)" and is used in the ld command to specify |
864a5fa8 |
1590 | what files to link/load from (also see dynamic_lib below for how to |
1591 | specify ld flags) |
8e07c86e |
1592 | |
bab2b58e |
1593 | =item LIB |
1594 | |
e35b8f9e |
1595 | LIB should only be set at C<perl Makefile.PL> time but is allowed as a |
f6d6199c |
1596 | MakeMaker argument. It has the effect of setting both INSTALLPRIVLIB |
1597 | and INSTALLSITELIB to that value regardless any explicit setting of |
1598 | those arguments (or of PREFIX). INSTALLARCHLIB and INSTALLSITEARCH |
1599 | are set to the corresponding architecture subdirectory. |
bab2b58e |
1600 | |
762efda7 |
1601 | =item LIBPERL_A |
1602 | |
1603 | The filename of the perllibrary that will be used together with this |
1604 | extension. Defaults to libperl.a. |
1605 | |
8e07c86e |
1606 | =item LIBS |
1607 | |
1608 | An anonymous array of alternative library |
1609 | specifications to be searched for (in order) until |
864a5fa8 |
1610 | at least one library is found. E.g. |
8e07c86e |
1611 | |
1612 | 'LIBS' => ["-lgdbm", "-ldbm -lfoo", "-L/path -ldbm.nfs"] |
1613 | |
1614 | Mind, that any element of the array |
1615 | contains a complete set of arguments for the ld |
1616 | command. So do not specify |
1617 | |
1618 | 'LIBS' => ["-ltcl", "-ltk", "-lX11"] |
1619 | |
1620 | See ODBM_File/Makefile.PL for an example, where an array is needed. If |
1621 | you specify a scalar as in |
1622 | |
1623 | 'LIBS' => "-ltcl -ltk -lX11" |
1624 | |
1625 | MakeMaker will turn it into an array with one element. |
1626 | |
864a5fa8 |
1627 | =item LINKTYPE |
8e07c86e |
1628 | |
e05e23b1 |
1629 | 'static' or 'dynamic' (default unless usedl=undef in |
1630 | config.sh). Should only be used to force static linking (also see |
864a5fa8 |
1631 | linkext below). |
8e07c86e |
1632 | |
864a5fa8 |
1633 | =item MAKEAPERL |
8e07c86e |
1634 | |
864a5fa8 |
1635 | Boolean which tells MakeMaker, that it should include the rules to |
1636 | make a perl. This is handled automatically as a switch by |
1637 | MakeMaker. The user normally does not need it. |
8e07c86e |
1638 | |
864a5fa8 |
1639 | =item MAKEFILE |
8e07c86e |
1640 | |
864a5fa8 |
1641 | The name of the Makefile to be produced. |
8e07c86e |
1642 | |
864a5fa8 |
1643 | =item MAN1PODS |
8e07c86e |
1644 | |
864a5fa8 |
1645 | Hashref of pod-containing files. MakeMaker will default this to all |
1646 | EXE_FILES files that include POD directives. The files listed |
1647 | here will be converted to man pages and installed as was requested |
1648 | at Configure time. |
8e07c86e |
1649 | |
864a5fa8 |
1650 | =item MAN3PODS |
8e07c86e |
1651 | |
bfa2a9ad |
1652 | Hashref that assigns to *.pm and *.pod files the files into which the |
1653 | manpages are to be written. MakeMaker parses all *.pod and *.pm files |
1654 | for POD directives. Files that contain POD will be the default keys of |
1655 | the MAN3PODS hashref. These will then be converted to man pages during |
1656 | C<make> and will be installed during C<make install>. |
8e07c86e |
1657 | |
864a5fa8 |
1658 | =item MAP_TARGET |
8e07c86e |
1659 | |
864a5fa8 |
1660 | If it is intended, that a new perl binary be produced, this variable |
1661 | may hold a name for that binary. Defaults to perl |
8e07c86e |
1662 | |
864a5fa8 |
1663 | =item MYEXTLIB |
4633a7c4 |
1664 | |
864a5fa8 |
1665 | If the extension links to a library that it builds set this to the |
1666 | name of the library (see SDBM_File) |
4633a7c4 |
1667 | |
864a5fa8 |
1668 | =item NAME |
8e07c86e |
1669 | |
864a5fa8 |
1670 | Perl module name for this extension (DBD::Oracle). This will default |
1671 | to the directory name but should be explicitly defined in the |
1672 | Makefile.PL. |
8e07c86e |
1673 | |
864a5fa8 |
1674 | =item NEEDS_LINKING |
8e07c86e |
1675 | |
a7665c5e |
1676 | MakeMaker will figure out if an extension contains linkable code |
864a5fa8 |
1677 | anywhere down the directory tree, and will set this variable |
a7665c5e |
1678 | accordingly, but you can speed it up a very little bit if you define |
864a5fa8 |
1679 | this boolean variable yourself. |
8e07c86e |
1680 | |
e05e23b1 |
1681 | =item NOECHO |
1682 | |
f1387719 |
1683 | Defaults to C<@>. By setting it to an empty string you can generate a |
e05e23b1 |
1684 | Makefile that echos all commands. Mainly used in debugging MakeMaker |
1685 | itself. |
1686 | |
864a5fa8 |
1687 | =item NORECURS |
8e07c86e |
1688 | |
e05e23b1 |
1689 | Boolean. Attribute to inhibit descending into subdirectories. |
8e07c86e |
1690 | |
762efda7 |
1691 | =item NO_VC |
1692 | |
a7665c5e |
1693 | In general, any generated Makefile checks for the current version of |
762efda7 |
1694 | MakeMaker and the version the Makefile was built under. If NO_VC is |
1695 | set, the version check is neglected. Do not write this into your |
1696 | Makefile.PL, use it interactively instead. |
1697 | |
864a5fa8 |
1698 | =item OBJECT |
8e07c86e |
1699 | |
864a5fa8 |
1700 | List of object files, defaults to '$(BASEEXT)$(OBJ_EXT)', but can be a long |
1701 | string containing all object files, e.g. "tkpBind.o |
1702 | tkpButton.o tkpCanvas.o" |
8e07c86e |
1703 | |
e35b8f9e |
1704 | (Where BASEEXT is the last component of NAME, and OBJ_EXT is $Config{obj_ext}.) |
1705 | |
3b03c0f3 |
1706 | =item OPTIMIZE |
1707 | |
1708 | Defaults to C<-O>. Set it to C<-g> to turn debugging on. The flag is |
1709 | passed to subdirectory makes. |
1710 | |
864a5fa8 |
1711 | =item PERL |
8e07c86e |
1712 | |
864a5fa8 |
1713 | Perl binary for tasks that can be done by miniperl |
8e07c86e |
1714 | |
da7f727a |
1715 | =item PERL_CORE |
1716 | |
1717 | Set only when MakeMaker is building the extensions of the Perl core |
1718 | distribution. |
1719 | |
864a5fa8 |
1720 | =item PERLMAINCC |
005c1a0e |
1721 | |
864a5fa8 |
1722 | The call to the program that is able to compile perlmain.c. Defaults |
1723 | to $(CC). |
005c1a0e |
1724 | |
864a5fa8 |
1725 | =item PERL_ARCHLIB |
005c1a0e |
1726 | |
da7f727a |
1727 | Same as for PERL_LIB, but for architecture dependent files. |
1728 | |
1729 | Used only when MakeMaker is building the extensions of the Perl core |
1730 | distribution (because normally $(PERL_ARCHLIB) is automatically in @INC, |
1731 | and adding it would get in the way of PERL5LIB). |
8e07c86e |
1732 | |
864a5fa8 |
1733 | =item PERL_LIB |
8e07c86e |
1734 | |
864a5fa8 |
1735 | Directory containing the Perl library to use. |
8e07c86e |
1736 | |
da7f727a |
1737 | Used only when MakeMaker is building the extensions of the Perl core |
1738 | distribution (because normally $(PERL_LIB) is automatically in @INC, |
1739 | and adding it would get in the way of PERL5LIB). |
1740 | |
e35b8f9e |
1741 | =item PERL_MALLOC_OK |
1742 | |
1743 | defaults to 0. Should be set to TRUE if the extension can work with |
1744 | the memory allocation routines substituted by the Perl malloc() subsystem. |
1745 | This should be applicable to most extensions with exceptions of those |
1746 | |
1747 | =over 4 |
1748 | |
1749 | =item * |
1750 | |
1751 | with bugs in memory allocations which are caught by Perl's malloc(); |
1752 | |
1753 | =item * |
1754 | |
1755 | which interact with the memory allocator in other ways than via |
1756 | malloc(), realloc(), free(), calloc(), sbrk() and brk(); |
1757 | |
1758 | =item * |
1759 | |
1760 | which rely on special alignment which is not provided by Perl's malloc(). |
1761 | |
1762 | =back |
1763 | |
1764 | B<NOTE.> Negligence to set this flag in I<any one> of loaded extension |
1765 | nullifies many advantages of Perl's malloc(), such as better usage of |
1766 | system resources, error detection, memory usage reporting, catchable failure |
1767 | of memory allocations, etc. |
1768 | |
da7f727a |
1769 | =item PERLRUN |
1770 | |
75e2e551 |
1771 | Use this instead of $(PERL) when you wish to run perl. It will set up |
1772 | extra necessary flags for you. |
f6d6199c |
1773 | |
ffbaec2a |
1774 | =item PERLRUNINST |
f6d6199c |
1775 | |
75e2e551 |
1776 | Use this instead of $(PERL) when you wish to run perl to work with |
1777 | modules. It will add things like -I$(INST_ARCH) and other necessary |
1778 | flags so perl can see the modules you're about to install. |
f6d6199c |
1779 | |
864a5fa8 |
1780 | =item PERL_SRC |
8e07c86e |
1781 | |
864a5fa8 |
1782 | Directory containing the Perl source code (use of this should be |
1783 | avoided, it may be undefined) |
8e07c86e |
1784 | |
2366100d |
1785 | =item PERM_RW |
1786 | |
de592821 |
1787 | Desired permission for read/writable files. Defaults to C<644>. |
2366100d |
1788 | See also L<MM_Unix/perm_rw>. |
1789 | |
1790 | =item PERM_RWX |
1791 | |
1792 | Desired permission for executable files. Defaults to C<755>. |
1793 | See also L<MM_Unix/perm_rwx>. |
1794 | |
864a5fa8 |
1795 | =item PL_FILES |
8e07c86e |
1796 | |
864a5fa8 |
1797 | Ref to hash of files to be processed as perl programs. MakeMaker |
1798 | will default to any found *.PL file (except Makefile.PL) being keys |
1799 | and the basename of the file being the value. E.g. |
8e07c86e |
1800 | |
864a5fa8 |
1801 | {'foobar.PL' => 'foobar'} |
8e07c86e |
1802 | |
864a5fa8 |
1803 | The *.PL files are expected to produce output to the target files |
3aa35033 |
1804 | themselves. If multiple files can be generated from the same *.PL |
1805 | file then the value in the hash can be a reference to an array of |
1806 | target file names. E.g. |
1807 | |
1808 | {'foobar.PL' => ['foobar1','foobar2']} |
8e07c86e |
1809 | |
864a5fa8 |
1810 | =item PM |
8e07c86e |
1811 | |
864a5fa8 |
1812 | Hashref of .pm files and *.pl files to be installed. e.g. |
8e07c86e |
1813 | |
864a5fa8 |
1814 | {'name_of_file.pm' => '$(INST_LIBDIR)/install_as.pm'} |
8e07c86e |
1815 | |
a3cb178b |
1816 | By default this will include *.pm and *.pl and the files found in |
1817 | the PMLIBDIRS directories. Defining PM in the |
864a5fa8 |
1818 | Makefile.PL will override PMLIBDIRS. |
8e07c86e |
1819 | |
864a5fa8 |
1820 | =item PMLIBDIRS |
8e07c86e |
1821 | |
864a5fa8 |
1822 | Ref to array of subdirectories containing library files. Defaults to |
a3cb178b |
1823 | [ 'lib', $(BASEEXT) ]. The directories will be scanned and I<any> files |
864a5fa8 |
1824 | they contain will be installed in the corresponding location in the |
1825 | library. A libscan() method can be used to alter the behaviour. |
1826 | Defining PM in the Makefile.PL will override PMLIBDIRS. |
8e07c86e |
1827 | |
e35b8f9e |
1828 | (Where BASEEXT is the last component of NAME.) |
1829 | |
131aa089 |
1830 | =item PM_FILTER |
1831 | |
1832 | A filter program, in the traditional Unix sense (input from stdin, output |
1833 | to stdout) that is passed on each .pm file during the build (in the |
1834 | pm_to_blib() phase). It is empty by default, meaning no filtering is done. |
1835 | |
1836 | Great care is necessary when defining the command if quoting needs to be |
1837 | done. For instance, you would need to say: |
1838 | |
1839 | {'PM_FILTER' => 'grep -v \\"^\\#\\"'} |
1840 | |
1841 | to remove all the leading coments on the fly during the build. The |
1842 | extra \\ are necessary, unfortunately, because this variable is interpolated |
1843 | within the context of a Perl program built on the command line, and double |
1844 | quotes are what is used with the -e switch to build that command line. The |
1845 | # is escaped for the Makefile, since what is going to be generated will then |
1846 | be: |
1847 | |
1848 | PM_FILTER = grep -v \"^\#\" |
1849 | |
1850 | Without the \\ before the #, we'd have the start of a Makefile comment, |
1851 | and the macro would be incorrectly defined. |
1852 | |
2aea4d40 |
1853 | =item POLLUTE |
1854 | |
1855 | Release 5.005 grandfathered old global symbol names by providing preprocessor |
a7665c5e |
1856 | macros for extension source compatibility. As of release 5.6, these |
2aea4d40 |
1857 | preprocessor definitions are not available by default. The POLLUTE flag |
1858 | specifies that the old names should still be defined: |
1859 | |
1860 | perl Makefile.PL POLLUTE=1 |
1861 | |
1862 | Please inform the module author if this is necessary to successfully install |
a7665c5e |
1863 | a module under 5.6 or later. |
2aea4d40 |
1864 | |
875fa795 |
1865 | =item PPM_INSTALL_EXEC |
1866 | |
20e08411 |
1867 | Name of the executable used to run C<PPM_INSTALL_SCRIPT> below. (e.g. perl) |
875fa795 |
1868 | |
1869 | =item PPM_INSTALL_SCRIPT |
1870 | |
1871 | Name of the script that gets executed by the Perl Package Manager after |
1872 | the installation of a package. |
1873 | |
864a5fa8 |
1874 | =item PREFIX |
8e07c86e |
1875 | |
f6d6199c |
1876 | This overrides all the default install locations. Man pages, |
1877 | libraries, scripts, etc... MakeMaker will try to make an educated |
1878 | guess about where to place things under the new PREFIX based on your |
1879 | Config defaults. Failing that, it will fall back to a structure |
1880 | which should be sensible for your platform. |
1881 | |
1882 | If you specify LIB or any INSTALL* variables they will not be effected |
1883 | by the PREFIX. |
a4260cbc |
1884 | |
5c161494 |
1885 | Defaults to $Config{installprefixexp}. |
1886 | |
b2340c53 |
1887 | =item PREREQ_FATAL |
1888 | |
1889 | Bool. If this parameter is true, failing to have the required modules |
1890 | (or the right versions thereof) will be fatal. perl Makefile.PL will die |
1891 | with the proper message. |
1892 | |
1893 | Note: see L<Test::Harness> for a shortcut for stopping tests early if |
1894 | you are missing dependencies. |
1895 | |
1896 | Do I<not> use this parameter for simple requirements, which could be resolved |
1897 | at a later time, e.g. after an unsuccessful B<make test> of your module. |
1898 | |
1899 | It is I<extremely> rare to have to use C<PREREQ_FATAL> at all! |
1900 | |
d5d4ec93 |
1901 | =item PREREQ_PM |
1902 | |
1903 | Hashref: Names of modules that need to be available to run this |
1904 | extension (e.g. Fcntl for SDBM_File) are the keys of the hash and the |
1905 | desired version is the value. If the required version number is 0, we |
1906 | only check if any version is installed already. |
1907 | |
88d69b28 |
1908 | =item PREREQ_PRINT |
1909 | |
1910 | Bool. If this parameter is true, the prerequisites will be printed to |
1911 | stdout and MakeMaker will exit. The output format is |
1912 | |
1913 | $PREREQ_PM = { |
1914 | 'A::B' => Vers1, |
1915 | 'C::D' => Vers2, |
1916 | ... |
1917 | }; |
1918 | |
1919 | =item PRINT_PREREQ |
1920 | |
1921 | RedHatism for C<PREREQ_PRINT>. The output format is different, though: |
1922 | |
1923 | perl(A::B)>=Vers1 perl(C::D)>=Vers2 ... |
1924 | |
5c161494 |
1925 | =item SITEPREFIX |
1926 | |
1927 | Like PREFIX, but only for the site install locations. |
1928 | |
57b1a898 |
1929 | Defaults to PREFIX (if set) or $Config{siteprefixexp}. Perls prior to |
1930 | 5.6.0 didn't have an explicit siteprefix in the Config. In those |
1931 | cases $Config{installprefix} will be used. |
5c161494 |
1932 | |
864a5fa8 |
1933 | =item SKIP |
8e07c86e |
1934 | |
da7f727a |
1935 | Arrayref. E.g. [qw(name1 name2)] skip (do not write) sections of the |
a7665c5e |
1936 | Makefile. Caution! Do not use the SKIP attribute for the negligible |
1937 | speedup. It may seriously damage the resulting Makefile. Only use it |
f1387719 |
1938 | if you really need it. |
8e07c86e |
1939 | |
864a5fa8 |
1940 | =item TYPEMAPS |
8e07c86e |
1941 | |
864a5fa8 |
1942 | Ref to array of typemap file names. Use this when the typemaps are |
1943 | in some directory other than the current directory or when they are |
1944 | not named B<typemap>. The last typemap in the list takes |
1945 | precedence. A typemap in the current directory has highest |
1946 | precedence, even if it isn't listed in TYPEMAPS. The default system |
1947 | typemap has lowest precedence. |
8e07c86e |
1948 | |
5c161494 |
1949 | =item VENDORPREFIX |
1950 | |
1951 | Like PREFIX, but only for the vendor install locations. |
1952 | |
1953 | Defaults to PREFIX (if set) or $Config{vendorprefixexp} |
1954 | |
45bc4d3a |
1955 | =item VERBINST |
1956 | |
1957 | If true, make install will be verbose |
1958 | |
864a5fa8 |
1959 | =item VERSION |
8e07c86e |
1960 | |
864a5fa8 |
1961 | Your version number for distributing the package. This defaults to |
1962 | 0.1. |
8e07c86e |
1963 | |
0d8023a2 |
1964 | =item VERSION_FROM |
1965 | |
1966 | Instead of specifying the VERSION in the Makefile.PL you can let |
1967 | MakeMaker parse a file to determine the version number. The parsing |
1968 | routine requires that the file named by VERSION_FROM contains one |
1969 | single line to compute the version number. The first line in the file |
1970 | that contains the regular expression |
1971 | |
84902520 |
1972 | /([\$*])(([\w\:\']*)\bVERSION)\b.*\=/ |
0d8023a2 |
1973 | |
1974 | will be evaluated with eval() and the value of the named variable |
1975 | B<after> the eval() will be assigned to the VERSION attribute of the |
1976 | MakeMaker object. The following lines will be parsed o.k.: |
1977 | |
1978 | $VERSION = '1.00'; |
84902520 |
1979 | *VERSION = \'1.01'; |
a884ca7c |
1980 | ( $VERSION ) = '$Revision: 1.63 $ ' =~ /\$Revision:\s+([^\s]+)/; |
0d8023a2 |
1981 | $FOO::VERSION = '1.10'; |
84902520 |
1982 | *FOO::VERSION = \'1.11'; |
f6d6199c |
1983 | our $VERSION = 1.2.3; # new for perl5.6.0 |
0d8023a2 |
1984 | |
1985 | but these will fail: |
1986 | |
1987 | my $VERSION = '1.01'; |
1988 | local $VERSION = '1.02'; |
1989 | local $FOO::VERSION = '1.30'; |
1990 | |
e35b8f9e |
1991 | (Putting C<my> or C<local> on the preceding line will work o.k.) |
1992 | |
84902520 |
1993 | The file named in VERSION_FROM is not added as a dependency to |
1994 | Makefile. This is not really correct, but it would be a major pain |
1995 | during development to have to rewrite the Makefile for any smallish |
1996 | change in that file. If you want to make sure that the Makefile |
1997 | contains the correct VERSION macro after any change of the file, you |
1998 | would have to do something like |
1999 | |
2000 | depend => { Makefile => '$(VERSION_FROM)' } |
2001 | |
2002 | See attribute C<depend> below. |
0d8023a2 |
2003 | |
864a5fa8 |
2004 | =item XS |
8e07c86e |
2005 | |
864a5fa8 |
2006 | Hashref of .xs files. MakeMaker will default this. e.g. |
8e07c86e |
2007 | |
864a5fa8 |
2008 | {'name_of_file.xs' => 'name_of_file.c'} |
8e07c86e |
2009 | |
864a5fa8 |
2010 | The .c files will automatically be included in the list of files |
2011 | deleted by a make clean. |
4633a7c4 |
2012 | |
864a5fa8 |
2013 | =item XSOPT |
8e07c86e |
2014 | |
864a5fa8 |
2015 | String of options to pass to xsubpp. This might include C<-C++> or |
2016 | C<-extern>. Do not include typemaps here; the TYPEMAP parameter exists for |
2017 | that purpose. |
8e07c86e |
2018 | |
864a5fa8 |
2019 | =item XSPROTOARG |
4633a7c4 |
2020 | |
4e68a208 |
2021 | May be set to an empty string, which is identical to C<-prototypes>, or |
864a5fa8 |
2022 | C<-noprototypes>. See the xsubpp documentation for details. MakeMaker |
4e68a208 |
2023 | defaults to the empty string. |
2024 | |
0d8023a2 |
2025 | =item XS_VERSION |
2026 | |
2027 | Your version number for the .xs file of this package. This defaults |
2028 | to the value of the VERSION attribute. |
2029 | |
8e07c86e |
2030 | =back |
2031 | |
2032 | =head2 Additional lowercase attributes |
2033 | |
2034 | can be used to pass parameters to the methods which implement that |
f1387719 |
2035 | part of the Makefile. |
8e07c86e |
2036 | |
2037 | =over 2 |
2038 | |
864a5fa8 |
2039 | =item clean |
8e07c86e |
2040 | |
864a5fa8 |
2041 | {FILES => "*.xyz foo"} |
2042 | |
c07a80fd |
2043 | =item depend |
2044 | |
2045 | {ANY_TARGET => ANY_DEPENDECY, ...} |
2046 | |
e35b8f9e |
2047 | (ANY_TARGET must not be given a double-colon rule by MakeMaker.) |
2048 | |
864a5fa8 |
2049 | =item dist |
2050 | |
5f8e730b |
2051 | {TARFLAGS => 'cvfF', COMPRESS => 'gzip', SUFFIX => '.gz', |
3b03c0f3 |
2052 | SHAR => 'shar -m', DIST_CP => 'ln', ZIP => '/bin/zip', |
f1387719 |
2053 | ZIPFLAGS => '-rl', DIST_DEFAULT => 'private tardist' } |
864a5fa8 |
2054 | |
2055 | If you specify COMPRESS, then SUFFIX should also be altered, as it is |
2056 | needed to tell make the target file of the compression. Setting |
2057 | DIST_CP to ln can be useful, if you need to preserve the timestamps on |
2058 | your files. DIST_CP can take the values 'cp', which copies the file, |
2059 | 'ln', which links the file, and 'best' which copies symbolic links and |
2060 | links the rest. Default is 'best'. |
2061 | |
2062 | =item dynamic_lib |
2063 | |
0d8023a2 |
2064 | {ARMAYBE => 'ar', OTHERLDFLAGS => '...', INST_DYNAMIC_DEP => '...'} |
8e07c86e |
2065 | |
8e07c86e |
2066 | =item linkext |
2067 | |
2068 | {LINKTYPE => 'static', 'dynamic' or ''} |
2069 | |
864a5fa8 |
2070 | NB: Extensions that have nothing but *.pm files had to say |
8e07c86e |
2071 | |
2072 | {LINKTYPE => ''} |
2073 | |
864a5fa8 |
2074 | with Pre-5.0 MakeMakers. Since version 5.00 of MakeMaker such a line |
a7665c5e |
2075 | can be deleted safely. MakeMaker recognizes when there's nothing to |
864a5fa8 |
2076 | be linked. |
8e07c86e |
2077 | |
864a5fa8 |
2078 | =item macro |
8e07c86e |
2079 | |
864a5fa8 |
2080 | {ANY_MACRO => ANY_VALUE, ...} |
8e07c86e |
2081 | |
2082 | =item realclean |
2083 | |
2084 | {FILES => '$(INST_ARCHAUTODIR)/*.xyz'} |
2085 | |
f2f614a6 |
2086 | =item test |
2087 | |
2088 | {TESTS => 't/*.t'} |
2089 | |
8e07c86e |
2090 | =item tool_autosplit |
2091 | |
f2f614a6 |
2092 | {MAXLEN => 8} |
005c1a0e |
2093 | |
2094 | =back |
2095 | |
2096 | =head2 Overriding MakeMaker Methods |
2097 | |
2098 | If you cannot achieve the desired Makefile behaviour by specifying |
2099 | attributes you may define private subroutines in the Makefile.PL. |
e0678a30 |
2100 | Each subroutine returns the text it wishes to have written to |
005c1a0e |
2101 | the Makefile. To override a section of the Makefile you can |
2102 | either say: |
2103 | |
f6d6199c |
2104 | sub MY::c_o { "new literal text" } |
005c1a0e |
2105 | |
2106 | or you can edit the default by saying something like: |
2107 | |
e0678a30 |
2108 | package MY; # so that "SUPER" works right |
2109 | sub c_o { |
f6d6199c |
2110 | my $inherited = shift->SUPER::c_o(@_); |
2111 | $inherited =~ s/old text/new text/; |
2112 | $inherited; |
2113 | } |
8e07c86e |
2114 | |
bdda3fbd |
2115 | If you are running experiments with embedding perl as a library into |
2116 | other applications, you might find MakeMaker is not sufficient. You'd |
2117 | better have a look at ExtUtils::Embed which is a collection of utilities |
2118 | for embedding. |
005c1a0e |
2119 | |
2120 | If you still need a different solution, try to develop another |
bdda3fbd |
2121 | subroutine that fits your needs and submit the diffs to |
e0678a30 |
2122 | F<makemaker@perl.org> |
005c1a0e |
2123 | |
e0678a30 |
2124 | For a complete description of all MakeMaker methods see |
2125 | L<ExtUtils::MM_Unix>. |
3b03c0f3 |
2126 | |
2127 | Here is a simple example of how to add a new target to the generated |
2128 | Makefile: |
2129 | |
2130 | sub MY::postamble { |
e0678a30 |
2131 | return <<'MAKE_FRAG'; |
3b03c0f3 |
2132 | $(MYEXTLIB): sdbm/Makefile |
f6d6199c |
2133 | cd sdbm && $(MAKE) all |
e0678a30 |
2134 | |
2135 | MAKE_FRAG |
3b03c0f3 |
2136 | } |
2137 | |
a884ca7c |
2138 | =head2 The End Of Cargo Cult Programming |
2139 | |
2140 | WriteMakefile() now does some basic sanity checks on its parameters to |
2141 | protect against typos and malformatted values. This means some things |
2142 | which happened to work in the past will now throw warnings and |
2143 | possibly produce internal errors. |
2144 | |
2145 | Some of the most common mistakes: |
2146 | |
2147 | =over 2 |
2148 | |
2149 | =item C<<MAN3PODS => ' '>> |
2150 | |
2151 | This is commonly used to supress the creation of man pages. MAN3PODS |
2152 | takes a hash ref not a string, but the above worked by accident in old |
2153 | versions of MakeMaker. |
2154 | |
2155 | The correct code is C<<MAN3PODS => { }>>. |
2156 | |
2157 | =back |
2158 | |
3b03c0f3 |
2159 | |
f1387719 |
2160 | =head2 Hintsfile support |
2161 | |
2162 | MakeMaker.pm uses the architecture specific information from |
2163 | Config.pm. In addition it evaluates architecture specific hints files |
2164 | in a C<hints/> directory. The hints files are expected to be named |
2165 | like their counterparts in C<PERL_SRC/hints>, but with an C<.pl> file |
2166 | name extension (eg. C<next_3_2.pl>). They are simply C<eval>ed by |
2167 | MakeMaker within the WriteMakefile() subroutine, and can be used to |
2168 | execute commands as well as to include special variables. The rules |
2169 | which hintsfile is chosen are the same as in Configure. |
2170 | |
2171 | The hintsfile is eval()ed immediately after the arguments given to |
2172 | WriteMakefile are stuffed into a hash reference $self but before this |
2173 | reference becomes blessed. So if you want to do the equivalent to |
2174 | override or create an attribute you would say something like |
2175 | |
2176 | $self->{LIBS} = ['-ldbm -lucb -lc']; |
2177 | |
005c1a0e |
2178 | =head2 Distribution Support |
2179 | |
2180 | For authors of extensions MakeMaker provides several Makefile |
2181 | targets. Most of the support comes from the ExtUtils::Manifest module, |
2182 | where additional documentation can be found. |
2183 | |
2184 | =over 4 |
2185 | |
2186 | =item make distcheck |
8e07c86e |
2187 | |
005c1a0e |
2188 | reports which files are below the build directory but not in the |
2189 | MANIFEST file and vice versa. (See ExtUtils::Manifest::fullcheck() for |
2190 | details) |
2191 | |
4633a7c4 |
2192 | =item make skipcheck |
2193 | |
2194 | reports which files are skipped due to the entries in the |
2195 | C<MANIFEST.SKIP> file (See ExtUtils::Manifest::skipcheck() for |
2196 | details) |
2197 | |
005c1a0e |
2198 | =item make distclean |
8e07c86e |
2199 | |
005c1a0e |
2200 | does a realclean first and then the distcheck. Note that this is not |
a7665c5e |
2201 | needed to build a new distribution as long as you are sure that the |
005c1a0e |
2202 | MANIFEST file is ok. |
2203 | |
2204 | =item make manifest |
8e07c86e |
2205 | |
005c1a0e |
2206 | rewrites the MANIFEST file, adding all remaining files found (See |
2207 | ExtUtils::Manifest::mkmanifest() for details) |
2208 | |
2209 | =item make distdir |
8e07c86e |
2210 | |
005c1a0e |
2211 | Copies all the files that are in the MANIFEST file to a newly created |
2212 | directory with the name C<$(DISTNAME)-$(VERSION)>. If that directory |
2213 | exists, it will be removed first. |
2214 | |
f6d6199c |
2215 | =item make disttest |
8e07c86e |
2216 | |
2217 | Makes a distdir first, and runs a C<perl Makefile.PL>, a make, and |
4633a7c4 |
2218 | a make test in that directory. |
8e07c86e |
2219 | |
005c1a0e |
2220 | =item make tardist |
8e07c86e |
2221 | |
3b03c0f3 |
2222 | First does a distdir. Then a command $(PREOP) which defaults to a null |
f1387719 |
2223 | command, followed by $(TOUNIX), which defaults to a null command under |
2224 | UNIX, and will convert files in distribution directory to UNIX format |
2225 | otherwise. Next it runs C<tar> on that directory into a tarfile and |
3b03c0f3 |
2226 | deletes the directory. Finishes with a command $(POSTOP) which |
2227 | defaults to a null command. |
005c1a0e |
2228 | |
2229 | =item make dist |
8e07c86e |
2230 | |
005c1a0e |
2231 | Defaults to $(DIST_DEFAULT) which in turn defaults to tardist. |
2232 | |
2233 | =item make uutardist |
8e07c86e |
2234 | |
005c1a0e |
2235 | Runs a tardist first and uuencodes the tarfile. |
2236 | |
2237 | =item make shdist |
8e07c86e |
2238 | |
3b03c0f3 |
2239 | First does a distdir. Then a command $(PREOP) which defaults to a null |
2240 | command. Next it runs C<shar> on that directory into a sharfile and |
2241 | deletes the intermediate directory again. Finishes with a command |
2242 | $(POSTOP) which defaults to a null command. Note: For shdist to work |
2243 | properly a C<shar> program that can handle directories is mandatory. |
2244 | |
2245 | =item make zipdist |
2246 | |
2247 | First does a distdir. Then a command $(PREOP) which defaults to a null |
2248 | command. Runs C<$(ZIP) $(ZIPFLAGS)> on that directory into a |
2249 | zipfile. Then deletes that directory. Finishes with a command |
2250 | $(POSTOP) which defaults to a null command. |
005c1a0e |
2251 | |
2252 | =item make ci |
8e07c86e |
2253 | |
2254 | Does a $(CI) and a $(RCS_LABEL) on all files in the MANIFEST file. |
2255 | |
2256 | =back |
005c1a0e |
2257 | |
2258 | Customization of the dist targets can be done by specifying a hash |
2259 | reference to the dist attribute of the WriteMakefile call. The |
2260 | following parameters are recognized: |
2261 | |
8e07c86e |
2262 | CI ('ci -u') |
5f8e730b |
2263 | COMPRESS ('gzip --best') |
005c1a0e |
2264 | POSTOP ('@ :') |
8e07c86e |
2265 | PREOP ('@ :') |
f1387719 |
2266 | TO_UNIX (depends on the system) |
8e07c86e |
2267 | RCS_LABEL ('rcs -q -Nv$(VERSION_SYM):') |
2268 | SHAR ('shar') |
5f8e730b |
2269 | SUFFIX ('.gz') |
8e07c86e |
2270 | TAR ('tar') |
2271 | TARFLAGS ('cvf') |
3b03c0f3 |
2272 | ZIP ('zip') |
2273 | ZIPFLAGS ('-r') |
005c1a0e |
2274 | |
2275 | An example: |
2276 | |
5f8e730b |
2277 | WriteMakefile( 'dist' => { COMPRESS=>"bzip2", SUFFIX=>".bz2" }) |
005c1a0e |
2278 | |
1b171b8d |
2279 | =head2 Disabling an extension |
2280 | |
2281 | If some events detected in F<Makefile.PL> imply that there is no way |
2282 | to create the Module, but this is a normal state of things, then you |
2283 | can create a F<Makefile> which does nothing, but succeeds on all the |
2284 | "usual" build targets. To do so, use |
2285 | |
2286 | ExtUtils::MakeMaker::WriteEmptyMakefile(); |
2287 | |
2288 | instead of WriteMakefile(). |
2289 | |
2290 | This may be useful if other modules expect this module to be I<built> |
2291 | OK, as opposed to I<work> OK (say, this system-dependent module builds |
2292 | in a subdirectory of some other distribution, or is listed as a |
2293 | dependency in a CPAN::Bundle, but the functionality is supported by |
2294 | different means on the current architecture). |
2295 | |
6ce21ffa |
2296 | =head1 ENVIRONMENT |
2297 | |
2298 | =over 8 |
2299 | |
2443aee5 |
2300 | =item PERL_MM_OPT |
6ce21ffa |
2301 | |
2302 | Command line options used by C<MakeMaker-E<gt>new()>, and thus by |
2303 | C<WriteMakefile()>. The string is split on whitespace, and the result |
2304 | is processed before any actual command line arguments are processed. |
2305 | |
9d05ba64 |
2306 | =item PERL_MM_USE_DEFAULT |
2307 | |
2308 | If set to a true value then MakeMaker's prompt function will |
2309 | always return the default without waiting for user input. |
2310 | |
6ce21ffa |
2311 | =back |
2312 | |
f1387719 |
2313 | =head1 SEE ALSO |
2314 | |
f6d6199c |
2315 | ExtUtils::MM_Unix, ExtUtils::Manifest ExtUtils::Install, |
2316 | ExtUtils::Embed |
005c1a0e |
2317 | |
e05e23b1 |
2318 | =head1 AUTHORS |
fed7345c |
2319 | |
e0678a30 |
2320 | Andy Dougherty <F<doughera@lafayette.edu>>, Andreas KE<ouml>nig |
2321 | <F<andreas.koenig@mind.de>>, Tim Bunce <F<timb@cpan.org>>. VMS |
de90321e |
2322 | support by Charles Bailey <F<bailey@newman.upenn.edu>>. OS/2 support |
2323 | by Ilya Zakharevich <F<ilya@math.ohio-state.edu>>. |
2324 | |
f6d6199c |
2325 | Currently maintained by Michael G Schwern <F<schwern@pobox.com>> |
2326 | |
2327 | Send patches and ideas to <F<makemaker@perl.org>>. |
e8012c20 |
2328 | |
e0678a30 |
2329 | Send bug reports via http://rt.cpan.org/. Please send your |
2330 | generated Makefile along with your report. |
2331 | |
2332 | For more up-to-date information, see http://www.makemaker.org. |
fed7345c |
2333 | |
005c1a0e |
2334 | =cut |