Rename the PRIElfbl, PRIX64, etc, to be PRIEUfldbl, PRIXU64,

[p5sagit/p5-mst-13.2.git] / hints / hpux.sh

#! /bin/sh

# hints/hpux.sh
# Perl Configure hints file for Hewlett-Packard's HP-UX 9.x and 10.x
# (Hopefully, 7.x through 11.x.)
#
# This file is based on hints/hpux_9.sh, Perl Configure hints file for
# Hewlett Packard HP-UX 9.x
#
# Use Configure -Dcc=gcc to use gcc.
#
# From: Jeff Okamoto <okamoto@corp.hp.com>
# and
# hints/hpux_10.sh, Perl Configure hints file for Hewlett Packard HP-UX 10.x
# From: Giles Lean <giles@nemeton.com.au>
# and
# Use #define CPU_* instead of comments for >= 10.x.
# Support PA1.2 under 10.x.
# Distinguish between PA2.0, PA2.1, etc.
# Distinguish between MC68020, MC68030, MC68040
# Don't assume every OS != 10 is < 10, (e.g., 11).
# From: Chuck Phillips <cdp@fc.hp.com>
# HP-UX 10 pthreads hints: Matthew T Harden <mthard@mthard1.monsanto.com>
# From: Dominic Dunlop <domo@computer.org>
# Abort and offer advice if bundled (non-ANSI) C compiler selected

# This version: March 8, 2000
# Current maintainer: Jeff Okamoto <okamoto@corp.hp.com>

#--------------------------------------------------------------------
# Use Configure -Dcc=gcc to use gcc.
# Use Configure -Dprefix=/usr/local to install in /usr/local.
#
# You may have dynamic loading problems if the environment variable
# LDOPTS='-a archive'.  Under >= 10.x, you can instead LDOPTS='-a
# archive_shared' to prefer archive libraries without requiring them.
# Regardless of HPUX release, in the "libs" variable or the ext.libs
# file, you can always give explicit path names to archive libraries
# that may not exist on the target machine.  E.g., /usr/lib/libndbm.a
# instead of -lndbm.  See also note below on ndbm.
#
# ALSO, bear in mind that gdbm and Berkely DB contain incompatible
# replacements for ndbm (and dbm) routines.  If you want concurrent
# access to ndbm files, you need to make sure libndbm is linked in
# *before* gdbm and Berkely DB.  Lastly, remember to check the
# "ext.libs" file which is *probably* messing up the order.  Often,
# you can replace ext.libs with an empty file to fix the problem.
#
# If you get a message about "too much defining", as may happen
# in HPUX < 10, you might have to append a single entry to your
# ccflags: '-Wp,-H256000'
# NOTE: This is a single entry (-W takes the argument 'p,-H256000').
#--------------------------------------------------------------------

# Turn on the _HPUX_SOURCE flag to get many of the HP add-ons
# regardless of compiler.  For the HP ANSI C compiler, you may also
# want to include +e to enable "long long" and "long double".
#
# HP compiler flags to include (if at all) *both* as part of ccflags
# and cc itself so Configure finds (and builds) everything
# consistently:
#	-Aa -D_HPUX_SOURCE +e
#
# Lastly, you may want to include the "-z" HP linker flag so that
# reading from a NULL pointer causes a SEGV.
ccflags="$ccflags -D_HPUX_SOURCE"

# Check if you're using the bundled C compiler.  This compiler doesn't support
# ANSI C (the -Aa flag) and so is not suitable for perl 5.5 and later.
case "$cc" in
'') if cc $ccflags -Aa 2>&1 | $contains 'option' >/dev/null
    then
	     cat <<'EOM' >&4

The bundled C compiler is not ANSI-compliant, and so cannot be used to
build perl.  Please see the file README.hpux for advice on alternative
compilers.

Cannot continue, aborting.
EOM
	exit 1
    else
	ccflags="$ccflags -Aa"	# The add-on compiler supports ANSI C
	# cppstdin and cpprun need the -Aa option if you use the unbundled 
	# ANSI C compiler (*not* the bundled K&R compiler or gcc)
	# [XXX this should be set automatically by Configure, but isn't yet.]
	# [XXX This is reported not to work.  You may have to edit config.sh.
	#  After running Configure, set cpprun and cppstdin in config.sh,
	#  run "Configure -S" and then "make".]
	cpprun="${cc:-cc} -E -Aa"
	cppstdin="$cpprun"
	cppminus='-'
	cpplast='-'
    fi
    case "$optimize" in
	# For HP's ANSI C compiler, up to "+O3" is safe for everything
	# except shared libraries (PIC code).  Max safe for PIC is "+O2".
	# Setting both causes innocuous warnings.
	'')	optimize='-O'
		#optimize='+O3'
		#cccdlflags='+z +O2'
		;;
    esac
    cc=cc
    ;;
esac

case `$cc -v 2>&1`"" in
*gcc*) ccisgcc="$define" ;;
*) ccisgcc='' ;;
   ccversion=`which cc | xargs what | grep Compiler | awk '{print $2}'` ;;
esac

# Determine the architecture type of this system.
# Keep leading tab below -- Configure Black Magic -- RAM, 03/02/97
	xxOsRevMajor=`uname -r | sed -e 's/^[^0-9]*//' | cut -d. -f1`;
	#xxOsRevMinor=`uname -r | sed -e 's/^[^0-9]*//' | cut -d. -f2`;
if [ "$xxOsRevMajor" -ge 10 ]
then
	# This system is running >= 10.x

	# Tested on 10.01 PA1.x and 10.20 PA[12].x.  Idea: Scan
	# /usr/include/sys/unistd.h for matches with "#define CPU_* `getconf
	# CPU_VERSION`" to determine CPU type.  Note the part following
	# "CPU_" is used, *NOT* the comment.
	#
	# ASSUMPTIONS: Numbers will continue to be defined in hex -- and in
	# /usr/include/sys/unistd.h -- and the CPU_* #defines will be kept
	# up to date with new CPU/OS releases.
	xxcpu=`getconf CPU_VERSION`; # Get the number.
	xxcpu=`printf '0x%x' $xxcpu`; # convert to hex
	archname=`sed -n -e "s/^#[ \t]*define[ \t]*CPU_//p" /usr/include/sys/unistd.h |
	    sed -n -e "s/[ \t]*$xxcpu[ \t].*//p" |
	    sed -e s/_RISC/-RISC/ -e s/HP_// -e s/_/./`;
else
	# This system is running <= 9.x
	# Tested on 9.0[57] PA and [78].0 MC680[23]0.  Idea: After removing
	# MC6888[12] from context string, use first CPU identifier.
	#
	# ASSUMPTION: Only CPU identifiers contain no lowercase letters.
	archname=`getcontext | tr ' ' '\012' | grep -v '[a-z]' | grep -v MC688 |
	    sed -e 's/HP-//' -e 1q`;
	selecttype='int *'
fi

# Do this right now instead of the delayed callback unit approach.
case "$use64bitall" in
$define|true|[yY]*) use64bitint="$define" ;;
esac
case "$use64bitint" in
$define|true|[yY]*)
    if [ "$xxOsRevMajor" -lt 11 ]; then
		cat <<EOM >&4

64-bit compilation is not supported on HP-UX $xxOsRevMajor.
You need at least HP-UX 11.0.
Cannot continue, aborting.

EOM
		exit 1
    fi

    # Without the 64-bit libc we cannot do much.
    libc='/lib/pa20_64/libc.sl'
    if [ ! -f "$libc" ]; then
		cat <<EOM >&4

*** You do not seem to have the 64-bit libraries in /lib/pa20_64.
*** Most importantly, I cannot find the $libc.
*** Cannot continue, aborting.

EOM
		exit 1
    fi

    ccflags="$ccflags +DD64"
    ldflags="$ldflags +DD64"
    test -d /lib/pa20_64 && loclibpth="$loclibpth /lib/pa20_64"
    libscheck='case "`/usr/bin/file $xxx`" in
*LP64*|*PA-RISC2.0*) ;;
*) xxx=/no/64-bit$xxx ;;
esac'
    if test -n "$ccisgcc" -o -n "$gccversion"; then
	ld="$cc"
    else	
	ld=/usr/bin/ld
    fi
    ar=/usr/bin/ar
    full_ar=$ar

    if test -z "$ccisgcc" -a -z "$gccversion"; then
       # The strict ANSI mode (-Aa) doesn't like the LL suffixes.
       ccflags=`echo " $ccflags "|sed 's@ -Aa @ @g'`
       case "$ccflags" in
       *-Ae*) ;;
       *) ccflags="$ccflags -Ae" ;;
       esac
    fi

    set `echo " $libswanted " | sed -e 's@ dl @ @'`
    libswanted="$*"

    ;;
esac

case "$ccisgcc" in
# Even if you use gcc, prefer the HP math library over the GNU one.
"$define") test -d /lib/pa1.1 && ccflags="$ccflags -L/lib/pa1.1" ;;
esac
    
case "$ccisgcc" in
"$define") ;;
*)  case "`getconf KERNEL_BITS 2>/dev/null`" in
    *64*) ldflags="$ldflags -Wl,+vnocompatwarnings" ;;
    esac
    ;;
esac

# Remove bad libraries that will cause problems
# (This doesn't remove libraries that don't actually exist)
# -lld is unneeded (and I can't figure out what it's used for anyway)
# -ldbm is obsolete and should not be used
# -lBSD contains BSD-style duplicates of SVR4 routines that cause confusion
# -lPW is obsolete and should not be used
# The libraries crypt, malloc, ndir, and net are empty.
# Although -lndbm should be included, it will make perl blow up if you should
# copy the binary to a system without libndbm.sl.  See ccdlflags below.
set `echo " $libswanted " | sed -e 's@ ld @ @' -e 's@ dbm @ @' -e 's@ BSD @ @' -e 's@ PW @ @'`
libswanted="$*"

# By setting the deferred flag below, this means that if you run perl
# on a system that does not have the required shared library that you
# linked it with, it will die when you try to access a symbol in the
# (missing) shared library.  If you would rather know at perl startup
# time that you are missing an important shared library, switch the
# comments so that immediate, rather than deferred loading is
# performed.  Even with immediate loading, you can postpone errors for
# undefined (or multiply defined) routines until actual access by
# adding the "nonfatal" option.
# ccdlflags="-Wl,-E -Wl,-B,immediate $ccdlflags"
# ccdlflags="-Wl,-E -Wl,-B,immediate,-B,nonfatal $ccdlflags"
ccdlflags="-Wl,-E -Wl,-B,deferred $ccdlflags"

case "$usemymalloc" in
'') usemymalloc='y' ;;
esac

alignbytes=8
# For native nm, you need "-p" to produce BSD format output.
nm_opt='-p'

# When HP-UX runs a script with "#!", it sets argv[0] to the script name.
toke_cflags='ccflags="$ccflags -DARG_ZERO_IS_SCRIPT"'

# If your compile complains about FLT_MIN, uncomment the next line
# POSIX_cflags='ccflags="$ccflags -DFLT_MIN=1.17549435E-38"'

# Comment this out if you don't want to follow the SVR4 filesystem layout
# that HP-UX 10.0 uses
case "$prefix" in
'') prefix='/opt/perl5' ;;
esac

# HP-UX can't do setuid emulation offered by Configure
case "$d_dosuid" in
'') d_dosuid="$undef" ;;
esac

# HP-UX 11 groks also LD_LIBRARY_PATH but SHLIB_PATH
# is recommended for compatibility.
case "$ldlibpthname" in
'') ldlibpthname=SHLIB_PATH ;;
esac

# HP-UX 10.20 and gcc 2.8.1 break UINT32_MAX.
case "$ccisgcc" in
"$define") ccflags="$ccflags -DUINT32_MAX_BROKEN" ;;
esac

cat > UU/cc.cbu <<'EOSH'
# XXX This script UU/cc.cbu will get 'called-back' by Configure after it
# XXX has prompted the user for the C compiler to use.
# Get gcc to share its secrets.
echo 'main() { return 0; }' > try.c
	# Indent to avoid propagation to config.sh
	verbose=`${cc:-cc} -v -o try try.c 2>&1`
if echo "$verbose" | grep '^Reading specs from' >/dev/null 2>&1; then
	# Using gcc.
	: nothing to see here, move on.
else
	# Using cc.
        ar=${ar:-ar}
	case "`$ar -V 2>&1`" in
	*GNU*)
	    if test -x /usr/bin/ar; then
	    	cat <<END >&2

*** You are using HP cc(1) but GNU ar(1).  This might lead into trouble
*** later on, I'm switching to HP ar to play safe.

END
		ar=/usr/bin/ar
	    fi
	;;
    esac
fi

EOSH

# Date: Fri, 6 Sep 96 23:15:31 CDT
# From: "Daniel S. Lewart" <d-lewart@uiuc.edu>
# I looked through the gcc.info and found this:
#   * GNU CC compiled code sometimes emits warnings from the HP-UX
#     assembler of the form:
#          (warning) Use of GR3 when frame >= 8192 may cause conflict.
#     These warnings are harmless and can be safely ignored.

cat > UU/usethreads.cbu <<'EOCBU'
# This script UU/usethreads.cbu will get 'called-back' by Configure 
# after it has prompted the user for whether to use threads.
case "$usethreads" in
$define|true|[yY]*)
        if [ "$xxOsRevMajor" -lt 10 ]; then
            cat <<EOM >&4
HP-UX $xxOsRevMajor cannot support POSIX threads.
Consider upgrading to at least HP-UX 11.
Cannot continue, aborting.
EOM
            exit 1
        fi
        case "$xxOsRevMajor" in
        10)
            # Under 10.X, a threaded perl can be built, but it needs
            # libcma and OLD_PTHREADS_API.  Also <pthread.h> needs to
            # be #included before any other includes (in perl.h)
            if [ ! -f /usr/include/pthread.h -o ! -f /usr/lib/libcma.sl ]; then
                cat <<EOM >&4
In HP-UX 10.X for POSIX threads you need both of the files
/usr/include/pthread.h and /usr/lib/libcma.sl.
Either you must install the CMA package or you must upgrade to HP-UX 11.
Cannot continue, aborting.
EOM
     	        exit 1
            fi

            # HP-UX 10.X uses the old pthreads API
            case "$d_oldpthreads" in
            '') d_oldpthreads="$define" ;;
            esac

            # include libcma before all the others
            libswanted="cma $libswanted"

            # tell perl.h to include <pthread.h> before other include files
            ccflags="$ccflags -DPTHREAD_H_FIRST"

            # CMA redefines select to cma_select, and cma_select expects int *
            # instead of fd_set * (just like 9.X)
            selecttype='int *'
            ;;
        11 | 12) # 12 may want upping the _POSIX_C_SOURCE datestamp...
            ccflags=" -D_POSIX_C_SOURCE=199506L $ccflags"
            set `echo X "$libswanted "| sed -e 's/ c / pthread c /'`
            shift
            libswanted="$*"
	    ;;
        esac
	usemymalloc='n'
	;;
esac
EOCBU

case "$uselargefiles-$ccisgcc" in
"$define-$define"|'-define') 
    cat <<EOM >&4

*** I'm ignoring large files for this build because
*** I don't know how to do use large files in HP-UX using gcc.

EOM
    uselargefiles="$undef"
    ;;
esac

cat > UU/uselargefiles.cbu <<'EOCBU'
# This script UU/uselargefiles.cbu will get 'called-back' by Configure 
# after it has prompted the user for whether to use large files.
case "$uselargefiles" in
''|$define|true|[yY]*)
	# there are largefile flags available via getconf(1)
	# but we cheat for now.  (Keep that in the left margin.)
ccflags_uselargefiles="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"

	ccflags="$ccflags $ccflags_uselargefiles"

        if test -z "$ccisgcc" -a -z "$gccversion"; then
           # The strict ANSI mode (-Aa) doesn't like large files.
           ccflags=`echo " $ccflags "|sed 's@ -Aa @ @g'`
           case "$ccflags" in
           *-Ae*) ;;
           *) ccflags="$ccflags -Ae" ;;
           esac
	fi

	;;
esac
EOCBU

# keep that leading tab.
	ccisgcc=''