[p5sagit/p5-mst-13.2.git] / hints / hpux.sh

#! /bin/sh

# hints/hpux.sh
# Perl Configure hints file for Hewlett-Packard's HP-UX 9.x and 10.x
# (Hopefully, 7.x through 11.x.)
#
# This file is based on hints/hpux_9.sh, Perl Configure hints file for
# Hewlett Packard HP-UX 9.x
#
# Use Configure -Dcc=gcc to use gcc.
#
# From: Jeff Okamoto <okamoto@corp.hp.com>
# and
# hints/hpux_10.sh, Perl Configure hints file for Hewlett Packard HP-UX 10.x
# From: Giles Lean <giles@nemeton.com.au>
# and
# Use #define CPU_* instead of comments for >= 10.x.
# Support PA1.2 under 10.x.
# Distinguish between PA2.0, PA2.1, etc.
# Distinguish between MC68020, MC68030, MC68040
# Don't assume every OS != 10 is < 10, (e.g., 11).
# From: Chuck Phillips <cdp@fc.hp.com>
# HP-UX 10 pthreads hints: Matthew T Harden <mthard@mthard1.monsanto.com>

# This version: August 15, 1997
# Current maintainer: Jeff Okamoto <okamoto@corp.hp.com>

#--------------------------------------------------------------------
# Use Configure -Dcc=gcc to use gcc.
# Use Configure -Dprefix=/usr/local to install in /usr/local.
#
# You may have dynamic loading problems if the environment variable
# LDOPTS='-a archive'.  Under >= 10.x, you can instead LDOPTS='-a
# archive_shared' to prefer archive libraries without requiring them.
# Regardless of HPUX release, in the "libs" variable or the ext.libs
# file, you can always give explicit path names to archive libraries
# that may not exist on the target machine.  E.g., /usr/lib/libndbm.a
# instead of -lndbm.  See also note below on ndbm.
#
# ALSO, bear in mind that gdbm and Berkely DB contain incompatible
# replacements for ndbm (and dbm) routines.  If you want concurrent
# access to ndbm files, you need to make sure libndbm is linked in
# *before* gdbm and Berkely DB.  Lastly, remember to check the
# "ext.libs" file which is *probably* messing up the order.  Often,
# you can replace ext.libs with an empty file to fix the problem.
#
# If you get a message about "too much defining", as may happen
# in HPUX < 10, you might have to append a single entry to your
# ccflags: '-Wp,-H256000'
# NOTE: This is a single entry (-W takes the argument 'p,-H256000').
#--------------------------------------------------------------------

# Turn on the _HPUX_SOURCE flag to get many of the HP add-ons
# regardless of compiler.  For the HP ANSI C compiler, you may also
# want to include +e to enable "long long" and "long double".
#
# HP compiler flags to include (if at all) *both* as part of ccflags
# and cc itself so Configure finds (and builds) everything
# consistently:
#	-Aa -D_HPUX_SOURCE +e
#
# Lastly, you may want to include the "-z" HP linker flag so that
# reading from a NULL pointer causes a SEGV.
ccflags="$ccflags -D_HPUX_SOURCE"

# Check if you're using the bundled C compiler.  This compiler doesn't support
# ANSI C (the -Aa flag) nor can it produce shared libraries.  Thus we have
# to turn off dynamic loading.
case "$cc" in
'') if cc $ccflags -Aa 2>&1 | $contains 'option' >/dev/null
    then
	case "$usedl" in
	 '') usedl="$undef"
	     cat <<'EOM' >&4

The bundled C compiler can not produce shared libraries, so you will
not be able to use dynamic loading. 

EOM
	     ;;
	esac
    else
	ccflags="$ccflags -Aa"	# The add-on compiler supports ANSI C
	# cppstdin and cpprun need the -Aa option if you use the unbundled 
	# ANSI C compiler (*not* the bundled K&R compiler or gcc)
	# [XXX this should be set automatically by Configure, but isn't yet.]
	# [XXX This is reported not to work.  You may have to edit config.sh.
	#  After running Configure, set cpprun and cppstdin in config.sh,
	#  run "Configure -S" and then "make".]
	cpprun="${cc:-cc} -E -Aa"
	cppstdin="$cpprun"
	cppminus='-'
	cpplast='-'
    fi
    # For HP's ANSI C compiler, up to "+O3" is safe for everything
    # except shared libraries (PIC code).  Max safe for PIC is "+O2".
    # Setting both causes innocuous warnings.
    #optimize='+O3'
    #cccdlflags='+z +O2'
    optimize='-O'
    ;;
esac

# Determine the architecture type of this system.
# Keep leading tab below -- Configure Black Magic -- RAM, 03/02/97
	xxOsRevMajor=`uname -r | sed -e 's/^[^0-9]*//' | cut -d. -f1`;
	#xxOsRevMinor=`uname -r | sed -e 's/^[^0-9]*//' | cut -d. -f2`;
if [ "$xxOsRevMajor" -ge 10 ]
then
	# This system is running >= 10.x

	# Tested on 10.01 PA1.x and 10.20 PA[12].x.  Idea: Scan
	# /usr/include/sys/unistd.h for matches with "#define CPU_* `getconf
	# CPU_VERSION`" to determine CPU type.  Note the part following
	# "CPU_" is used, *NOT* the comment.
	#
	# ASSUMPTIONS: Numbers will continue to be defined in hex -- and in
	# /usr/include/sys/unistd.h -- and the CPU_* #defines will be kept
	# up to date with new CPU/OS releases.
	xxcpu=`getconf CPU_VERSION`; # Get the number.
	xxcpu=`printf '0x%x' $xxcpu`; # convert to hex
	archname=`sed -n -e "s/^#[ \t]*define[ \t]*CPU_//p" /usr/include/sys/unistd.h |
	    sed -n -e "s/[ \t]*$xxcpu[ \t].*//p" |
	    sed -e s/_RISC/-RISC/ -e s/HP_// -e s/_/./`;
else
	# This system is running <= 9.x
	# Tested on 9.0[57] PA and [78].0 MC680[23]0.  Idea: After removing
	# MC6888[12] from context string, use first CPU identifier.
	#
	# ASSUMPTION: Only CPU identifiers contain no lowercase letters.
	archname=`getcontext | tr ' ' '\012' | grep -v '[a-z]' | grep -v MC688 |
	    sed -e 's/HP-//' -e 1q`;
	selecttype='int *'
fi

case "$use64bitint" in
$define|true|[yY]*)
    if [ "$xxOsRevMajor" -lt 11 ]; then
		cat <<EOM >&4

64-bit compilation is not supported on HP-UX $xxOsRevMajor.
You need at least HP-UX 11.0.
Cannot continue, aborting.

EOM
		exit 1
    fi

    # Without the 64-bit libc we cannot do much.
    if [ ! -f /lib/pa20_64/libc.sl ]; then
		cat <<EOM >&4

You do not seem to have the 64-bit libraries in /lib/pa20_64.
Most importantly, I cannot find /lib/pa20_64/libc.sl.
Cannot continue, aborting.

EOM
		exit 1
    fi

    ccflags="$ccflags +DD64"
    ldflags="$ldflags +DD64"
    test -d /lib/pa20_64 && loclibpth="$loclibpth /lib/pa20_64"
    libscheck='case "`file $xxx`" in
*LP64*|*PA-RISC2.0*) ;;
*) xxx=/no/64-bit$xxx ;;
esac'
    ld=/usr/bin/ld
    ar=/usr/bin/ar
    full_ar=$ar

    # The strict ANSI mode (-Aa) doesn't like the LL suffixes.
    case "$ccflags" in
    *-Aa*)
	    echo "(Changing from strict ANSI compilation to extended because of 64-bitness)"
	    ccflags=`echo $ccflags|sed 's@ -Aa @ -Ae @'`
	    ;;
    esac    

    set `echo " $libswanted " | sed -e 's@ dl @ @'`
    libswanted="$*"

    case "`$cc -v 2>&1`" in
    *gcc*) test -d /lib/pa20_64 && ccflags="$ccflags -L/lib/pa20_64" ;;
    esac
    ;;
*) loclibpth="$loclibpth /lib/pa1.1"
    case "`$cc -v 2>&1`" in
    *gcc*) test -d /lib/pa20_64 && ccflags="$ccflags -L/lib/pa20_64" ;;
    esac
    ;;
esac

case "`getconf KERNEL_BITS 2>/dev/null`" in
*64*) ldflags="$ldflags -Wl,+vnocompatwarnings" ;;
esac

# Remove bad libraries that will cause problems
# (This doesn't remove libraries that don't actually exist)
# -lld is unneeded (and I can't figure out what it's used for anyway)
# -ldbm is obsolete and should not be used
# -lBSD contains BSD-style duplicates of SVR4 routines that cause confusion
# -lPW is obsolete and should not be used
# The libraries crypt, malloc, ndir, and net are empty.
# Although -lndbm should be included, it will make perl blow up if you should
# copy the binary to a system without libndbm.sl.  See ccdlflags below.
set `echo " $libswanted " | sed -e 's@ ld @ @' -e 's@ dbm @ @' -e 's@ BSD @ @' -e 's@ PW @ @'`
libswanted="$*"

# By setting the deferred flag below, this means that if you run perl
# on a system that does not have the required shared library that you
# linked it with, it will die when you try to access a symbol in the
# (missing) shared library.  If you would rather know at perl startup
# time that you are missing an important shared library, switch the
# comments so that immediate, rather than deferred loading is
# performed.  Even with immediate loading, you can postpone errors for
# undefined (or multiply defined) routines until actual access by
# adding the "nonfatal" option.
# ccdlflags="-Wl,-E -Wl,-B,immediate $ccdlflags"
# ccdlflags="-Wl,-E -Wl,-B,immediate,-B,nonfatal $ccdlflags"
ccdlflags="-Wl,-E -Wl,-B,deferred $ccdlflags"

usemymalloc='y'
alignbytes=8
# For native nm, you need "-p" to produce BSD format output.
nm_opt='-p'

# When HP-UX runs a script with "#!", it sets argv[0] to the script name.
toke_cflags='ccflags="$ccflags -DARG_ZERO_IS_SCRIPT"'

# If your compile complains about FLT_MIN, uncomment the next line
# POSIX_cflags='ccflags="$ccflags -DFLT_MIN=1.17549435E-38"'

# Comment this out if you don't want to follow the SVR4 filesystem layout
# that HP-UX 10.0 uses
case "$prefix" in
'') prefix='/opt/perl5' ;;
esac

# HP-UX can't do setuid emulation offered by Configure
case "$d_dosuid" in
'') d_dosuid="$undef" ;;
esac

# HP-UX 11 groks also LD_LIBRARY_PATH but SHLIB_PATH
# is recommended for compatibility.
case "$ldlibpthname" in
'') ldlibpthname=SHLIB_PATH ;;
esac

# HP-UX 10.20 and gcc 2.8.1 break UINT32_MAX.
case "$cc" in
*gcc*) ccflags="$ccflags -DUINT32_MAX_BROKEN" ;;
esac

cat > UU/cc.cbu <<'EOSH'
# XXX This script UU/cc.cbu will get 'called-back' by Configure after it
# XXX has prompted the user for the C compiler to use.
# Get gcc to share its secrets.
echo 'main() { return 0; }' > try.c
	# Indent to avoid propagation to config.sh
	verbose=`${cc:-cc} -v -o try try.c 2>&1`
if echo "$verbose" | grep '^Reading specs from' >/dev/null 2>&1; then
	# Using gcc.
	: nothing to see here, move on.
else
	# Using cc.
        ar=${ar:-ar}
	case "`$ar -V 2>&1`" in
	*GNU*)
	    if test -x /usr/bin/ar; then
	    	cat <<END >&2

NOTE: You are using HP cc(1) but GNU ar(1).  This might lead into trouble
later on, I'm switching to HP ar to play safe.
END
		ar=/usr/bin/ar
	    fi
	;;
    esac
fi

EOSH

# Date: Fri, 6 Sep 96 23:15:31 CDT
# From: "Daniel S. Lewart" <d-lewart@uiuc.edu>
# I looked through the gcc.info and found this:
#   * GNU CC compiled code sometimes emits warnings from the HP-UX
#     assembler of the form:
#          (warning) Use of GR3 when frame >= 8192 may cause conflict.
#     These warnings are harmless and can be safely ignored.

# This script UU/usethreads.cbu will get 'called-back' by Configure 
# after it has prompted the user for whether to use threads.
cat > UU/usethreads.cbu <<'EOCBU'
case "$usethreads" in
$define|true|[yY]*)
        if [ "$xxOsRevMajor" -lt 10 ]; then
            cat <<EOM >&4
HP-UX $xxOsRevMajor cannot support POSIX threads.
Consider upgrading to at least HP-UX 11.
Cannot continue, aborting.
EOM
            exit 1
        fi
        case "$xxOsRevMajor" in
        10)
            # Under 10.X, a threaded perl can be built, but it needs
            # libcma and OLD_PTHREADS_API.  Also <pthread.h> needs to
            # be #included before any other includes (in perl.h)
            if [ ! -f /usr/include/pthread.h -o ! -f /usr/lib/libcma.sl ]; then
                cat <<EOM >&4
In HP-UX 10.X for POSIX threads you need both of the files
/usr/include/pthread.h and /usr/lib/libcma.sl.
Either you must install the CMA package or you must upgrade to HP-UX 11.
Cannot continue, aborting.
EOM
     	        exit 1
            fi

            # HP-UX 10.X uses the old pthreads API
            case "$d_oldpthreads" in
            '') d_oldpthreads="$define" ;;
            esac

            # include libcma before all the others
            libswanted="cma $libswanted"

            # tell perl.h to include <pthread.h> before other include files
            ccflags="$ccflags -DPTHREAD_H_FIRST"

            # CMA redefines select to cma_select, and cma_select expects int *
            # instead of fd_set * (just like 9.X)
            selecttype='int *'
            ;;
        11 | 12) # 12 may want upping the _POSIX_C_SOURCE datestamp...
            ccflags=" -D_POSIX_C_SOURCE=199506L $ccflags"
            set `echo X "$libswanted "| sed -e 's/ c / pthread c /'`
            shift
            libswanted="$*"
	    ;;
        esac
	usemymalloc='n'
	;;
esac
EOCBU

# This script UU/uselfs.cbu will get 'called-back' by Configure 
# after it has prompted the user for whether to use 64 bits.
cat > UU/uselfs.cbu <<'EOCBU'
case "$uselargefiles" in
''|$define|true|[yY]*)
	# there are largefile flags available via getconf(1)
	# but we cheat for now.
	ccflags="$ccflags -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"

        # The strict ANSI mode (-Aa) doesn't like large files.
	case "$ccflags" in
	*-Aa*)
	    echo "(Changing from strict ANSI compilation to extended because of large files)"
	    ccflags=`echo $ccflags|sed 's@ -Aa @ -Ae @'`
	    ;;
	esac    
	;;
esac
EOCBU
Commit	Line	Data
a28b458a	1	#! /bin/sh
a28b458a	2
8e07c86e	3	# hints/hpux.sh
90248788	4	# Perl Configure hints file for Hewlett-Packard's HP-UX 9.x and 10.x
a28b458a	5	# (Hopefully, 7.x through 11.x.)
	6	#
	7	# This file is based on hints/hpux_9.sh, Perl Configure hints file for
	8	# Hewlett Packard HP-UX 9.x
	9	#
8e07c86e	10	# Use Configure -Dcc=gcc to use gcc.
a28b458a	11	#
8ebc5c01	12	# From: Jeff Okamoto <okamoto@corp.hp.com>
8e07c86e	13	# and
023707f0	14	# hints/hpux_10.sh, Perl Configure hints file for Hewlett Packard HP-UX 10.x
8e07c86e	15	# From: Giles Lean <giles@nemeton.com.au>
a28b458a	16	# and
	17	# Use #define CPU_* instead of comments for >= 10.x.
	18	# Support PA1.2 under 10.x.
	19	# Distinguish between PA2.0, PA2.1, etc.
	20	# Distinguish between MC68020, MC68030, MC68040
	21	# Don't assume every OS != 10 is < 10, (e.g., 11).
	22	# From: Chuck Phillips <cdp@fc.hp.com>
5ff3f7a4	23	# HP-UX 10 pthreads hints: Matthew T Harden <mthard@mthard1.monsanto.com>
023707f0	24
90248788	25	# This version: August 15, 1997
8ebc5c01	26	# Current maintainer: Jeff Okamoto <okamoto@corp.hp.com>
8e07c86e	27
68dc0745	28	#--------------------------------------------------------------------
8e07c86e	29	# Use Configure -Dcc=gcc to use gcc.
8e07c86e	30	# Use Configure -Dprefix=/usr/local to install in /usr/local.
68dc0745	31	#
a28b458a	32	# You may have dynamic loading problems if the environment variable
	33	# LDOPTS='-a archive'. Under >= 10.x, you can instead LDOPTS='-a
	34	# archive_shared' to prefer archive libraries without requiring them.
	35	# Regardless of HPUX release, in the "libs" variable or the ext.libs
	36	# file, you can always give explicit path names to archive libraries
	37	# that may not exist on the target machine. E.g., /usr/lib/libndbm.a
	38	# instead of -lndbm. See also note below on ndbm.
	39	#
	40	# ALSO, bear in mind that gdbm and Berkely DB contain incompatible
	41	# replacements for ndbm (and dbm) routines. If you want concurrent
	42	# access to ndbm files, you need to make sure libndbm is linked in
	43	# before gdbm and Berkely DB. Lastly, remember to check the
	44	# "ext.libs" file which is probably messing up the order. Often,
	45	# you can replace ext.libs with an empty file to fix the problem.
68dc0745	46	#
491527d0	47	# If you get a message about "too much defining", as may happen
	48	# in HPUX < 10, you might have to append a single entry to your
	49	# ccflags: '-Wp,-H256000'
	50	# NOTE: This is a single entry (-W takes the argument 'p,-H256000').
68dc0745	51	#--------------------------------------------------------------------
4633a7c4	52
8e07c86e	53	# Turn on the _HPUX_SOURCE flag to get many of the HP add-ons
a28b458a	54	# regardless of compiler. For the HP ANSI C compiler, you may also
	55	# want to include +e to enable "long long" and "long double".
	56	#
	57	# HP compiler flags to include (if at all) both as part of ccflags
	58	# and cc itself so Configure finds (and builds) everything
	59	# consistently:
	60	# -Aa -D_HPUX_SOURCE +e
	61	#
	62	# Lastly, you may want to include the "-z" HP linker flag so that
	63	# reading from a NULL pointer causes a SEGV.
d5374cbf	64	ccflags="$ccflags -D_HPUX_SOURCE"
023707f0	65
8e07c86e	66	# Check if you're using the bundled C compiler. This compiler doesn't support
	67	# ANSI C (the -Aa flag) nor can it produce shared libraries. Thus we have
	68	# to turn off dynamic loading.
	69	case "$cc" in
a5f75d66	70	'') if cc $ccflags -Aa 2>&1 \| $contains 'option' >/dev/null
8e07c86e	71	then
	72	case "$usedl" in
	73	'') usedl="$undef"
68dc0745	74	cat <<'EOM' >&4
8e07c86e	75
	76	The bundled C compiler can not produce shared libraries, so you will
	77	not be able to use dynamic loading.
	78
	79	EOM
	80	;;
	81	esac
	82	else
	83	ccflags="$ccflags -Aa" # The add-on compiler supports ANSI C
959c26a4	84	# cppstdin and cpprun need the -Aa option if you use the unbundled
	85	# ANSI C compiler (not the bundled K&R compiler or gcc)
	86	# [XXX this should be set automatically by Configure, but isn't yet.]
	87	# [XXX This is reported not to work. You may have to edit config.sh.
	88	# After running Configure, set cpprun and cppstdin in config.sh,
	89	# run "Configure -S" and then "make".]
	90	cpprun="${cc:-cc} -E -Aa"
	91	cppstdin="$cpprun"
	92	cppminus='-'
	93	cpplast='-'
8e07c86e	94	fi
a28b458a	95	# For HP's ANSI C compiler, up to "+O3" is safe for everything
	96	# except shared libraries (PIC code). Max safe for PIC is "+O2".
	97	# Setting both causes innocuous warnings.
	98	#optimize='+O3'
	99	#cccdlflags='+z +O2'
8e07c86e	100	optimize='-O'
	101	;;
	102	esac
	103
4633a7c4	104	# Determine the architecture type of this system.
fa89f053	105	# Keep leading tab below -- Configure Black Magic -- RAM, 03/02/97
a28b458a	106	xxOsRevMajor=`uname -r \| sed -e 's/^[^0-9]*//' \| cut -d. -f1`;
	107	#xxOsRevMinor=`uname -r \| sed -e 's/^[^0-9]*//' \| cut -d. -f2`;
	108	if [ "$xxOsRevMajor" -ge 10 ]
4633a7c4	109	then
a28b458a	110	# This system is running >= 10.x
	111
	112	# Tested on 10.01 PA1.x and 10.20 PA[12].x. Idea: Scan
	113	# /usr/include/sys/unistd.h for matches with "#define CPU_* `getconf
	114	# CPU_VERSION`" to determine CPU type. Note the part following
	115	# "CPU_" is used, NOT the comment.
	116	#
	117	# ASSUMPTIONS: Numbers will continue to be defined in hex -- and in
	118	# /usr/include/sys/unistd.h -- and the CPU_* #defines will be kept
	119	# up to date with new CPU/OS releases.
	120	xxcpu=`getconf CPU_VERSION`; # Get the number.
	121	xxcpu=`printf '0x%x' $xxcpu`; # convert to hex
	122	archname=`sed -n -e "s/^#[ \t]define[ \t]CPU_//p" /usr/include/sys/unistd.h \|
	123	sed -n -e "s/[ \t]$xxcpu[ \t].//p" \|
	124	sed -e s/_RISC/-RISC/ -e s/HP_// -e s/_/./`;
4633a7c4	125	else
a28b458a	126	# This system is running <= 9.x
	127	# Tested on 9.0[57] PA and [78].0 MC680[23]0. Idea: After removing
	128	# MC6888[12] from context string, use first CPU identifier.
	129	#
	130	# ASSUMPTION: Only CPU identifiers contain no lowercase letters.
	131	archname=`getcontext \| tr ' ' '\012' \| grep -v '[a-z]' \| grep -v MC688 \|
	132	sed -e 's/HP-//' -e 1q`;
90248788	133	selecttype='int *'
4633a7c4	134	fi
4633a7c4	135
10cc9d2a	136	case "$use64bitint" in
bf0c440f	137	$define\|true\|[yY]*)
	138	if [ "$xxOsRevMajor" -lt 11 ]; then
	139	cat <<EOM >&4
	140
	141	64-bit compilation is not supported on HP-UX $xxOsRevMajor.
	142	You need at least HP-UX 11.0.
	143	Cannot continue, aborting.
	144
	145	EOM
	146	exit 1
	147	fi
	148
	149	# Without the 64-bit libc we cannot do much.
	150	if [ ! -f /lib/pa20_64/libc.sl ]; then
	151	cat <<EOM >&4
	152
	153	You do not seem to have the 64-bit libraries in /lib/pa20_64.
	154	Most importantly, I cannot find /lib/pa20_64/libc.sl.
	155	Cannot continue, aborting.
	156
	157	EOM
	158	exit 1
	159	fi
	160
	161	ccflags="$ccflags +DD64"
	162	ldflags="$ldflags +DD64"
09ea5ba9	163	test -d /lib/pa20_64 && loclibpth="$loclibpth /lib/pa20_64"
bf0c440f	164	libscheck='case "`file $xxx`" in
	165	LP64\|PA-RISC2.0) ;;
	166	*) xxx=/no/64-bit$xxx ;;
	167	esac'
	168	ld=/usr/bin/ld
	169	ar=/usr/bin/ar
	170	full_ar=$ar
	171
	172	# The strict ANSI mode (-Aa) doesn't like the LL suffixes.
	173	case "$ccflags" in
	174	-Aa)
	175	echo "(Changing from strict ANSI compilation to extended because of 64-bitness)"
	176	ccflags=`echo $ccflags\|sed 's@ -Aa @ -Ae @'`
	177	;;
	178	esac
	179
	180	set `echo " $libswanted " \| sed -e 's@ dl @ @'`
	181	libswanted="$*"
	182
	183	case "`$cc -v 2>&1`" in
09ea5ba9	184	gcc) test -d /lib/pa20_64 && ccflags="$ccflags -L/lib/pa20_64" ;;
bf0c440f	185	esac
	186	;;
	187	*) loclibpth="$loclibpth /lib/pa1.1"
	188	case "`$cc -v 2>&1`" in
09ea5ba9	189	gcc) test -d /lib/pa20_64 && ccflags="$ccflags -L/lib/pa20_64" ;;
bf0c440f	190	esac
	191	;;
	192	esac
	193
	194	case "`getconf KERNEL_BITS 2>/dev/null`" in
	195	64) ldflags="$ldflags -Wl,+vnocompatwarnings" ;;
	196	esac
	197
8e07c86e	198	# Remove bad libraries that will cause problems
	199	# (This doesn't remove libraries that don't actually exist)
	200	# -lld is unneeded (and I can't figure out what it's used for anyway)
	201	# -ldbm is obsolete and should not be used
	202	# -lBSD contains BSD-style duplicates of SVR4 routines that cause confusion
	203	# -lPW is obsolete and should not be used
8e07c86e	204	# The libraries crypt, malloc, ndir, and net are empty.
0ca047c2	205	# Although -lndbm should be included, it will make perl blow up if you should
0ca047c2	206	# copy the binary to a system without libndbm.sl. See ccdlflags below.
a28b458a	207	set `echo " $libswanted " \| sed -e 's@ ld @ @' -e 's@ dbm @ @' -e 's@ BSD @ @' -e 's@ PW @ @'`
8e07c86e	208	libswanted="$*"
8e07c86e	209
a28b458a	210	# By setting the deferred flag below, this means that if you run perl
	211	# on a system that does not have the required shared library that you
	212	# linked it with, it will die when you try to access a symbol in the
	213	# (missing) shared library. If you would rather know at perl startup
	214	# time that you are missing an important shared library, switch the
	215	# comments so that immediate, rather than deferred loading is
	216	# performed. Even with immediate loading, you can postpone errors for
	217	# undefined (or multiply defined) routines until actual access by
	218	# adding the "nonfatal" option.
	219	# ccdlflags="-Wl,-E -Wl,-B,immediate $ccdlflags"
	220	# ccdlflags="-Wl,-E -Wl,-B,immediate,-B,nonfatal $ccdlflags"
214989af	221	ccdlflags="-Wl,-E -Wl,-B,deferred $ccdlflags"
8e07c86e	222
	223	usemymalloc='y'
	224	alignbytes=8
a28b458a	225	# For native nm, you need "-p" to produce BSD format output.
a28b458a	226	nm_opt='-p'
8ebc5c01	227
774d564b	228	# When HP-UX runs a script with "#!", it sets argv[0] to the script name.
	229	toke_cflags='ccflags="$ccflags -DARG_ZERO_IS_SCRIPT"'
	230
8e07c86e	231	# If your compile complains about FLT_MIN, uncomment the next line
	232	# POSIX_cflags='ccflags="$ccflags -DFLT_MIN=1.17549435E-38"'
	233
4633a7c4	234	# Comment this out if you don't want to follow the SVR4 filesystem layout
8e07c86e	235	# that HP-UX 10.0 uses
8e07c86e	236	case "$prefix" in
08a33705	237	'') prefix='/opt/perl5' ;;
8e07c86e	238	esac
4137488c	239
dc45a647	240	# HP-UX can't do setuid emulation offered by Configure
	241	case "$d_dosuid" in
	242	'') d_dosuid="$undef" ;;
	243	esac
	244
5cf1d1f1	245	# HP-UX 11 groks also LD_LIBRARY_PATH but SHLIB_PATH
	246	# is recommended for compatibility.
	247	case "$ldlibpthname" in
	248	'') ldlibpthname=SHLIB_PATH ;;
	249	esac
	250
716026f9	251	# HP-UX 10.20 and gcc 2.8.1 break UINT32_MAX.
	252	case "$cc" in
	253	gcc) ccflags="$ccflags -DUINT32_MAX_BROKEN" ;;
	254	esac
	255
fa2879fb	256	cat > UU/cc.cbu <<'EOSH'
	257	# XXX This script UU/cc.cbu will get 'called-back' by Configure after it
	258	# XXX has prompted the user for the C compiler to use.
	259	# Get gcc to share its secrets.
	260	echo 'main() { return 0; }' > try.c
	261	# Indent to avoid propagation to config.sh
	262	verbose=`${cc:-cc} -v -o try try.c 2>&1`
	263	if echo "$verbose" \| grep '^Reading specs from' >/dev/null 2>&1; then
	264	# Using gcc.
	265	: nothing to see here, move on.
	266	else
	267	# Using cc.
	268	ar=${ar:-ar}
	269	case "`$ar -V 2>&1`" in
	270	GNU)
	271	if test -x /usr/bin/ar; then
	272	cat <<END >&2
	273
	274	NOTE: You are using HP cc(1) but GNU ar(1). This might lead into trouble
	275	later on, I'm switching to HP ar to play safe.
fa2879fb	276	END
	277	ar=/usr/bin/ar
	278	fi
	279	;;
	280	esac
	281	fi
	282
	283	EOSH
	284
4137488c	285	# Date: Fri, 6 Sep 96 23:15:31 CDT
	286	# From: "Daniel S. Lewart" <d-lewart@uiuc.edu>
	287	# I looked through the gcc.info and found this:
	288	# * GNU CC compiled code sometimes emits warnings from the HP-UX
	289	# assembler of the form:
	290	# (warning) Use of GR3 when frame >= 8192 may cause conflict.
	291	# These warnings are harmless and can be safely ignored.
104d25b7	292
	293	# This script UU/usethreads.cbu will get 'called-back' by Configure
	294	# after it has prompted the user for whether to use threads.
	295	cat > UU/usethreads.cbu <<'EOCBU'
	296	case "$usethreads" in
	297	$define\|true\|[yY]*)
	298	if [ "$xxOsRevMajor" -lt 10 ]; then
	299	cat <<EOM >&4
	300	HP-UX $xxOsRevMajor cannot support POSIX threads.
	301	Consider upgrading to at least HP-UX 11.
	302	Cannot continue, aborting.
	303	EOM
	304	exit 1
	305	fi
	306	case "$xxOsRevMajor" in
	307	10)
	308	# Under 10.X, a threaded perl can be built, but it needs
	309	# libcma and OLD_PTHREADS_API. Also <pthread.h> needs to
	310	# be #included before any other includes (in perl.h)
	311	if [ ! -f /usr/include/pthread.h -o ! -f /usr/lib/libcma.sl ]; then
	312	cat <<EOM >&4
	313	In HP-UX 10.X for POSIX threads you need both of the files
	314	/usr/include/pthread.h and /usr/lib/libcma.sl.
	315	Either you must install the CMA package or you must upgrade to HP-UX 11.
	316	Cannot continue, aborting.
	317	EOM
	318	exit 1
	319	fi
	320
	321	# HP-UX 10.X uses the old pthreads API
	322	case "$d_oldpthreads" in
	323	'') d_oldpthreads="$define" ;;
	324	esac
	325
	326	# include libcma before all the others
	327	libswanted="cma $libswanted"
	328
	329	# tell perl.h to include <pthread.h> before other include files
	330	ccflags="$ccflags -DPTHREAD_H_FIRST"
	331
	332	# CMA redefines select to cma_select, and cma_select expects int *
	333	# instead of fd_set * (just like 9.X)
	334	selecttype='int *'
	335	;;
227c31c3	336	11 \| 12) # 12 may want upping the _POSIX_C_SOURCE datestamp...
	337	ccflags=" -D_POSIX_C_SOURCE=199506L $ccflags"
	338	set `echo X "$libswanted "\| sed -e 's/ c / pthread c /'`
	339	shift
	340	libswanted="$*"
104d25b7	341	;;
104d25b7	342	esac
227c31c3	343	usemymalloc='n'
104d25b7	344	;;
	345	esac
	346	EOCBU
	347
bd9b35c9	348	# This script UU/uselfs.cbu will get 'called-back' by Configure
	349	# after it has prompted the user for whether to use 64 bits.
	350	cat > UU/uselfs.cbu <<'EOCBU'
	351	case "$uselargefiles" in
10cc9d2a	352	''\|$define\|true\|[yY]*)
7b0dd49d	353	# there are largefile flags available via getconf(1)
	354	# but we cheat for now.
	355	ccflags="$ccflags -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
43999f95	356
43999f95	357	# The strict ANSI mode (-Aa) doesn't like large files.
f7dd4e7f	358	case "$ccflags" in
	359	-Aa)
	360	echo "(Changing from strict ANSI compilation to extended because of large files)"
	361	ccflags=`echo $ccflags\|sed 's@ -Aa @ -Ae @'`
	362	;;
	363	esac
bd9b35c9	364	;;
	365	esac
	366	EOCBU
6b8eaf93	367
f7dd4e7f	368