[p5sagit/p5-mst-13.2.git] / hints / bsdos.sh

# hints/bsdos.sh
#
# hints file for BSD/OS 2.x (adapted from bsd386.sh)
# Original by Neil Bowers <neilb@khoros.unm.edu>
#     Tue Oct  4 12:01:34 EDT 1994
# Updated by Tony Sanders <sanders@bsdi.com>
#     Mon Nov 27 17:25:51 CST 1995
#
# You can override the compiler and loader on the Configure command line:
#     ./Configure -Dcc=shlicc2 -Dld=shlicc2

# filename extension for shared library objects
so='o'

# Don't use this for Perl 5.002, which needs parallel sig_name and sig_num lists
#sig_name='ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM URG STOP TSTP CONT CHLD TTIN TTOU IO XCPU XFSZ VTALRM PROF WINCH INFO USR1 USR2 '
signal_t='void'
d_voidsig='define'
d_dosuid='define'

# we don't want to use -lnm, since exp() is busted (in 1.1 anyway)
set `echo X "$libswanted "| sed -e 's/ nm / /'`
shift
libswanted="$*"

# BSD/OS X libraries are in their own tree
glibpth="$glibpth /usr/X11/lib"
ldflags="$ldflags -L/usr/X11/lib"

# Avoid telldir prototype conflict in pp_sys.c
pp_sys_cflags='ccflags="$ccflags -DHAS_TELLDIR_PROTOTYPE"'

case "$bsdos_distribution" in
defined)
	d_portable='no'
	prefix='/usr/contrib'
	man3dir='/usr/contrib/man/man3'
	;;
esac

case "$osvers" in
1.0*)
	# Avoid problems with HUGE_VAL in POSIX in 1.0's cc.
	POSIX_cflags='ccflags="$ccflags -UHUGE_VAL"' 
	;;
1.1*)
	# Use gcc2
	case "$cc" in
	'')	cc='gcc2' ;;
	esac
	;;
2.0*)
	# default to GCC 2.X w/shared libraries
	case "$cc" in
	'')	cc='shlicc2' ;;
	esac

	# default ld to shared library linker
	case "$ld" in
	'')	ld='shlicc2' ;;
	esac

	# setre?[ug]id() have been replaced by the _POSIX_SAVED_IDS stuff
	# in 4.4BSD-based systems (including BSD/OS 2.0 and later).
	# See http://www.bsdi.com/bsdi-man?setuid(2)
	d_setregid='undef'
	d_setreuid='undef'
	d_setrgid='undef'
	d_setruid='undef'
	;;
2.1*)
	# Use 2.1's shlicc2 for dynamic linking
	# Since cc -o is linking, use it for compiling too.
	# I'm not sure whether Configure is careful about
	# distinguishing between the two.

	case "$cc" in
	'')	cc='shlicc2'
		cccdlflags=' ' ;; # Avoid the dreaded -fpic
	esac

	# Link with shared libraries in 2.1
	# Turns out that shlicc2 will automatically use the
	# shared libs, so don't explicitly specify -lc_s.2.1.*
	case "$ld" in
	'')	ld='shlicc2'
		lddlflags='-r' ;; # this one is necessary
	esac

	# setre?[ug]id() have been replaced by the _POSIX_SAVED_IDS  stuff
	# in 4.4BSD-based systems (including BSD/OS 2.0 and later).
	# See http://www.bsdi.com/bsdi-man?setuid(2)
	# This stuff may or may not be right, but it works.
	d_setregid='undef'
	d_setreuid='undef'
	d_setrgid='undef'
	d_setruid='undef'
	;;
esac
Commit	Line	Data
0e9bad51	1	# hints/bsdos.sh
25f94b33	2	#
	3	# hints file for BSD/OS 2.x (adapted from bsd386.sh)
	4	# Original by Neil Bowers <neilb@khoros.unm.edu>
	5	# Tue Oct 4 12:01:34 EDT 1994
	6	# Updated by Tony Sanders <sanders@bsdi.com>
0e9bad51	7	# Mon Nov 27 17:25:51 CST 1995
25f94b33	8	#
25f94b33	9	# You can override the compiler and loader on the Configure command line:
0e9bad51	10	# ./Configure -Dcc=shlicc2 -Dld=shlicc2
25f94b33	11
	12	# filename extension for shared library objects
	13	so='o'
	14
0e9bad51	15	# Don't use this for Perl 5.002, which needs parallel sig_name and sig_num lists
0e9bad51	16	#sig_name='ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM URG STOP TSTP CONT CHLD TTIN TTOU IO XCPU XFSZ VTALRM PROF WINCH INFO USR1 USR2 '
25f94b33	17	signal_t='void'
0e9bad51	18	d_voidsig='define'
25f94b33	19	d_dosuid='define'
25f94b33	20
0e9bad51	21	# we don't want to use -lnm, since exp() is busted (in 1.1 anyway)
25f94b33	22	set `echo X "$libswanted "\| sed -e 's/ nm / /'`
	23	shift
	24	libswanted="$*"
	25
0e9bad51	26	# BSD/OS X libraries are in their own tree
	27	glibpth="$glibpth /usr/X11/lib"
	28	ldflags="$ldflags -L/usr/X11/lib"
	29
	30	# Avoid telldir prototype conflict in pp_sys.c
25f94b33	31	pp_sys_cflags='ccflags="$ccflags -DHAS_TELLDIR_PROTOTYPE"'
25f94b33	32
0e9bad51	33	case "$bsdos_distribution" in
	34	defined)
	35	d_portable='no'
	36	prefix='/usr/contrib'
	37	man3dir='/usr/contrib/man/man3'
	38	;;
	39	esac
	40
25f94b33	41	case "$osvers" in
	42	1.0*)
	43	# Avoid problems with HUGE_VAL in POSIX in 1.0's cc.
	44	POSIX_cflags='ccflags="$ccflags -UHUGE_VAL"'
	45	;;
	46	1.1*)
0e9bad51	47	# Use gcc2
25f94b33	48	case "$cc" in
0e9bad51	49	'') cc='gcc2' ;;
25f94b33	50	esac
25f94b33	51	;;
d84bea6a	52	2.0*)
0e9bad51	53	# default to GCC 2.X w/shared libraries
25f94b33	54	case "$cc" in
0e9bad51	55	'') cc='shlicc2' ;;
25f94b33	56	esac
25f94b33	57
0e9bad51	58	# default ld to shared library linker
25f94b33	59	case "$ld" in
0e9bad51	60	'') ld='shlicc2' ;;
25f94b33	61	esac
	62
	63	# setre?[ug]id() have been replaced by the _POSIX_SAVED_IDS stuff
	64	# in 4.4BSD-based systems (including BSD/OS 2.0 and later).
	65	# See http://www.bsdi.com/bsdi-man?setuid(2)
	66	d_setregid='undef'
	67	d_setreuid='undef'
	68	d_setrgid='undef'
	69	d_setruid='undef'
	70	;;
d84bea6a	71	2.1*)
	72	# Use 2.1's shlicc2 for dynamic linking
	73	# Since cc -o is linking, use it for compiling too.
	74	# I'm not sure whether Configure is careful about
	75	# distinguishing between the two.
	76
	77	case "$cc" in
	78	'') cc='shlicc2'
	79	cccdlflags=' ' ;; # Avoid the dreaded -fpic
	80	esac
	81
	82	# Link with shared libraries in 2.1
	83	# Turns out that shlicc2 will automatically use the
	84	# shared libs, so don't explicitly specify -lc_s.2.1.*
	85	case "$ld" in
	86	'') ld='shlicc2'
	87	lddlflags='-r' ;; # this one is necessary
	88	esac
	89
	90	# setre?[ug]id() have been replaced by the _POSIX_SAVED_IDS stuff
	91	# in 4.4BSD-based systems (including BSD/OS 2.0 and later).
	92	# See http://www.bsdi.com/bsdi-man?setuid(2)
	93	# This stuff may or may not be right, but it works.
	94	d_setregid='undef'
	95	d_setreuid='undef'
	96	d_setrgid='undef'
	97	d_setruid='undef'
	98	;;
25f94b33	99	esac