Commit | Line | Data |
03c9e98c |
1 | use Config; |
2 | |
3 | sub to_string { |
4 | my ($value) = @_; |
146174a9 |
5 | $value =~ s/\\/\\\\/g; |
03c9e98c |
6 | $value =~ s/'/\\'/g; |
7 | return "'$value'"; |
8 | } |
9 | |
1c7f9087 |
10 | # |
11 | # subroutine expand_os_specific expands $^O-specific preprocessing information |
12 | # so that it will not be re-calculated at runtime in Dynaloader.pm |
13 | # |
14 | # Syntax of preprocessor should be kept extremely simple: |
15 | # - directives are in double angle brackets <<...>> |
16 | # - <<=string>> will be just evaluated |
17 | # - for $^O-specific there are two forms: |
18 | # <<$^O-eq-osname>> |
19 | # <<$^O-ne-osname>> |
20 | # this directive should be closed with respectively |
21 | # <</$^O-eq-osname>> |
22 | # <</$^O-ne-osname>> |
23 | # construct <<|$^O-ne-osname>> means #else |
24 | # nested <<$^O...>>-constructs are allowed but nested values must be for |
25 | # different OS-names! |
26 | # |
27 | # -- added by VKON, 03-10-2004 to separate $^O-specific between OSes |
28 | # (so that Win32 never checks for $^O eq 'VMS' for example) |
27da23d5 |
29 | # |
30 | # The $^O tests test both for $^O and for $Config{osname}. |
31 | # The latter is better for some for cross-compilation setups. |
32 | # |
1c7f9087 |
33 | sub expand_os_specific { |
34 | my $s = shift; |
35 | for ($s) { |
36 | s/<<=(.*?)>>/$1/gee; |
37 | s/<<\$\^O-(eq|ne)-(\w+)>>(.*?)<<\/\$\^O-\1-\2>>/ |
38 | my ($op, $os, $expr) = ($1,$2,$3); |
39 | if ($op ne 'eq' and $op ne 'ne') {die "wrong eq-ne arg in $&"}; |
40 | if ($expr =~ m[^(.*?)<<\|\$\^O-$op-$os>>(.*?)$]s) { |
41 | # #if;#else;#endif |
42 | my ($if,$el) = ($1,$2); |
27da23d5 |
43 | if (($op eq 'eq' and ($^O eq $os || $Config{osname} eq $os)) || ($op eq 'ne' and ($^O ne $os || $Config{osname} ne $os))) { |
1c7f9087 |
44 | $if |
45 | } |
46 | else { |
47 | $el |
48 | } |
49 | } |
50 | else { |
51 | # #if;#endif |
27da23d5 |
52 | if (($op eq 'eq' and ($^O eq $os || $Config{osname} eq $os)) || ($op eq 'ne' and ($^O ne $os || $Config{osname} ne $os))) { |
1c7f9087 |
53 | $expr |
54 | } |
55 | else { |
56 | "" |
57 | } |
58 | } |
59 | /ges; |
60 | if (/<<(=|\$\^O-)/) {die "bad <<\$^O-eq/ne-osname>> expression.". |
61 | " Unclosed brackets?"; |
62 | } |
63 | } |
64 | $s; |
65 | } |
66 | |
03c9e98c |
67 | unlink "DynaLoader.pm" if -f "DynaLoader.pm"; |
68 | open OUT, ">DynaLoader.pm" or die $!; |
69 | print OUT <<'EOT'; |
70 | |
d0a5ed9f |
71 | # Generated from DynaLoader.pm.PL |
03c9e98c |
72 | |
a0d0e21e |
73 | package DynaLoader; |
74 | |
8e07c86e |
75 | # And Gandalf said: 'Many folk like to know beforehand what is to |
76 | # be set on the table; but those who have laboured to prepare the |
77 | # feast like to keep their secret; for wonder makes the words of |
78 | # praise louder.' |
79 | |
6662521e |
80 | # (Quote from Tolkien suggested by Anno Siegel.) |
8e07c86e |
81 | # |
82 | # See pod text at end of file for documentation. |
83 | # See also ext/DynaLoader/README in source tree for other information. |
84 | # |
85 | # Tim.Bunce@ig.co.uk, August 1994 |
86 | |
816b255b |
87 | BEGIN { $VERSION = '1.07'; } |
dc848c6f |
88 | |
dc848c6f |
89 | require AutoLoader; |
90 | *AUTOLOAD = \&AutoLoader::AUTOLOAD; |
8e07c86e |
91 | |
7e9f3af8 |
92 | use Config; |
93 | |
8e07c86e |
94 | # enable debug/trace messages from DynaLoader perl code |
95 | $dl_debug = $ENV{PERL_DL_DEBUG} || 0 unless defined $dl_debug; |
96 | |
ff7f3c60 |
97 | # |
98 | # Flags to alter dl_load_file behaviour. Assigned bits: |
99 | # 0x01 make symbols available for linking later dl_load_file's. |
100 | # (only known to work on Solaris 2 using dlopen(RTLD_GLOBAL)) |
f86702cc |
101 | # (ignored under VMS; effect is built-in to image linking) |
ff7f3c60 |
102 | # |
103 | # This is called as a class method $module->dl_load_flags. The |
104 | # definition here will be inherited and result on "default" loading |
105 | # behaviour unless a sub-class of DynaLoader defines its own version. |
106 | # |
107 | |
108 | sub dl_load_flags { 0x00 } |
109 | |
03c9e98c |
110 | # ($dl_dlext, $dlsrc) |
111 | # = @Config::Config{'dlext', 'dlsrc'}; |
112 | EOT |
113 | |
1c7f9087 |
114 | $dl_dlext = $Config::Config{'dlext'}; |
115 | $dl_so = $Config::Config{'so'}; |
116 | print OUT " (\$dl_dlext, \$dlsrc) = ('$dl_dlext', ", |
117 | to_string($Config::Config{'dlsrc'}), ")\n;"; |
ff7f3c60 |
118 | |
1c7f9087 |
119 | print OUT expand_os_specific(<<'EOT'); |
8e07c86e |
120 | |
1c7f9087 |
121 | <<$^O-eq-VMS>> |
8e07c86e |
122 | # Some systems need special handling to expand file specifications |
123 | # (VMS support by Charles Bailey <bailey@HMIVAX.HUMGEN.UPENN.EDU>) |
124 | # See dl_expandspec() for more details. Should be harmless but |
125 | # inefficient to define on systems that don't need it. |
632a9a7f |
126 | $Is_VMS = $^O eq 'VMS'; |
1c7f9087 |
127 | <</$^O-eq-VMS>> |
128 | $do_expand = <<$^O-eq-VMS>>1<<|$^O-eq-VMS>>0<</$^O-eq-VMS>>; |
8e07c86e |
129 | |
1c7f9087 |
130 | <<$^O-eq-MacOS>> |
d5201bd2 |
131 | my $Mac_FS; |
1c7f9087 |
132 | $Mac_FS = eval { require Mac::FileSpec::Unixish }; |
133 | <</$^O-eq-MacOS>> |
d5201bd2 |
134 | |
8e07c86e |
135 | @dl_require_symbols = (); # names of symbols we need |
136 | @dl_resolve_using = (); # names of files to link with |
137 | @dl_library_path = (); # path to look for files |
bff25830 |
138 | |
139 | #XSLoader.pm may have added elements before we were required |
89166d32 |
140 | #@dl_shared_objects = (); # shared objects for symbols we have |
bff25830 |
141 | #@dl_librefs = (); # things we have loaded |
142 | #@dl_modules = (); # Modules we have loaded |
8e07c86e |
143 | |
144 | # This is a fix to support DLD's unfortunate desire to relink -lc |
145 | @dl_resolve_using = dl_findfile('-lc') if $dlsrc eq "dl_dld.xs"; |
146 | |
d0a5ed9f |
147 | EOT |
03c9e98c |
148 | |
d0a5ed9f |
149 | my $cfg_dl_library_path = <<'EOT'; |
632a9a7f |
150 | push(@dl_library_path, split(' ', $Config::Config{libpth})); |
03c9e98c |
151 | EOT |
152 | |
d0a5ed9f |
153 | sub dquoted_comma_list { |
1c7f9087 |
154 | join(", ", map {'"'.quotemeta($_).'"'} @_); |
d0a5ed9f |
155 | } |
03c9e98c |
156 | |
d0a5ed9f |
157 | if ($ENV{PERL_BUILD_EXPAND_CONFIG_VARS}) { |
158 | eval $cfg_dl_library_path; |
159 | if (!$ENV{PERL_BUILD_EXPAND_ENV_VARS}) { |
160 | my $dl_library_path = dquoted_comma_list(@dl_library_path); |
161 | print OUT <<EOT; |
7e9f3af8 |
162 | # The below \@dl_library_path has been expanded (%Config) in Perl build time. |
d0a5ed9f |
163 | |
164 | \@dl_library_path = ($dl_library_path); |
165 | |
166 | EOT |
167 | } |
168 | } |
169 | else { |
170 | print OUT <<EOT; |
171 | # Initialise \@dl_library_path with the 'standard' library path |
172 | # for this platform as determined by Configure. |
173 | |
174 | $cfg_dl_library_path |
175 | |
176 | EOT |
177 | } |
8e07c86e |
178 | |
8225e35f |
179 | my $ldlibpthname; |
7e9f3af8 |
180 | my $ldlibpthname_defined; |
8225e35f |
181 | my $pthsep; |
182 | |
183 | if ($ENV{PERL_BUILD_EXPAND_CONFIG_VARS}) { |
1c7f9087 |
184 | $ldlibpthname = to_string($Config::Config{ldlibpthname}); |
185 | $ldlibpthname_defined = to_string(defined $Config::Config{ldlibpthname} ? 1 : 0); |
186 | $pthsep = to_string($Config::Config{path_sep}); |
8225e35f |
187 | } |
188 | else { |
7e9f3af8 |
189 | $ldlibpthname = q($Config::Config{ldlibpthname}); |
190 | $ldlibpthname_defined = q(defined $Config::Config{ldlibpthname}); |
191 | $pthsep = q($Config::Config{path_sep}); |
1c7f9087 |
192 | } |
193 | print OUT <<EOT; |
7e9f3af8 |
194 | my \$ldlibpthname = $ldlibpthname; |
195 | my \$ldlibpthname_defined = $ldlibpthname_defined; |
196 | my \$pthsep = $pthsep; |
8225e35f |
197 | |
198 | EOT |
8225e35f |
199 | |
7e9f3af8 |
200 | my $env_dl_library_path = <<'EOT'; |
201 | if ($ldlibpthname_defined && |
202 | exists $ENV{$ldlibpthname}) { |
203 | push(@dl_library_path, split(/$pthsep/, $ENV{$ldlibpthname})); |
8225e35f |
204 | } |
205 | |
5cf1d1f1 |
206 | # E.g. HP-UX supports both its native SHLIB_PATH *and* LD_LIBRARY_PATH. |
8225e35f |
207 | |
7e9f3af8 |
208 | if ($ldlibpthname_defined && |
209 | $ldlibpthname ne 'LD_LIBRARY_PATH' && |
210 | exists $ENV{LD_LIBRARY_PATH}) { |
211 | push(@dl_library_path, split(/$pthsep/, $ENV{LD_LIBRARY_PATH})); |
d0a5ed9f |
212 | } |
e6197cab |
213 | EOT |
214 | |
d0a5ed9f |
215 | if ($ENV{PERL_BUILD_EXPAND_CONFIG_VARS} && $ENV{PERL_BUILD_EXPAND_ENV_VARS}) { |
216 | eval $env_dl_library_path; |
e6197cab |
217 | } |
d0a5ed9f |
218 | else { |
219 | print OUT <<EOT; |
220 | # Add to \@dl_library_path any extra directories we can gather from environment |
221 | # during runtime. |
e6197cab |
222 | |
d0a5ed9f |
223 | $env_dl_library_path |
224 | |
225 | EOT |
e6197cab |
226 | } |
227 | |
d0a5ed9f |
228 | if ($ENV{PERL_BUILD_EXPAND_CONFIG_VARS} && $ENV{PERL_BUILD_EXPAND_ENV_VARS}) { |
229 | my $dl_library_path = dquoted_comma_list(@dl_library_path); |
230 | print OUT <<EOT; |
7e9f3af8 |
231 | # The below \@dl_library_path has been expanded (%Config, %ENV) |
232 | # in Perl build time. |
d0a5ed9f |
233 | |
234 | \@dl_library_path = ($dl_library_path); |
235 | |
236 | EOT |
146174a9 |
237 | } |
8e07c86e |
238 | |
1c7f9087 |
239 | |
240 | # following long string contains $^O-specific stuff, which is factored out |
241 | print OUT expand_os_specific(<<'EOT'); |
8e07c86e |
242 | # No prizes for guessing why we don't say 'bootstrap DynaLoader;' here. |
b4cea227 |
243 | # NOTE: All dl_*.xs (including dl_none.xs) define a dl_error() XSUB |
bb3913c7 |
244 | boot_DynaLoader('DynaLoader') if defined(&boot_DynaLoader) && |
b4cea227 |
245 | !defined(&dl_error); |
8e07c86e |
246 | |
247 | if ($dl_debug) { |
248 | print STDERR "DynaLoader.pm loaded (@INC, @dl_library_path)\n"; |
249 | print STDERR "DynaLoader not linked into this perl\n" |
250 | unless defined(&boot_DynaLoader); |
251 | } |
252 | |
253 | 1; # End of main code |
254 | |
255 | |
fb73857a |
256 | sub croak { require Carp; Carp::croak(@_) } |
257 | |
146174a9 |
258 | sub bootstrap_inherit { |
259 | my $module = $_[0]; |
260 | local *isa = *{"$module\::ISA"}; |
261 | local @isa = (@isa, 'DynaLoader'); |
262 | # Cannot goto due to delocalization. Will report errors on a wrong line? |
263 | bootstrap(@_); |
264 | } |
265 | |
8e07c86e |
266 | # The bootstrap function cannot be autoloaded (without complications) |
267 | # so we define it here: |
268 | |
269 | sub bootstrap { |
270 | # use local vars to enable $module.bs script to edit values |
271 | local(@args) = @_; |
272 | local($module) = $args[0]; |
273 | local(@dirs, $file); |
274 | |
fb73857a |
275 | unless ($module) { |
276 | require Carp; |
277 | Carp::confess("Usage: DynaLoader::bootstrap(module)"); |
278 | } |
8e07c86e |
279 | |
280 | # A common error on platforms which don't support dynamic loading. |
281 | # Since it's fatal and potentially confusing we give a detailed message. |
fb73857a |
282 | croak("Can't load module $module, dynamic loading not available in this perl.\n". |
8e07c86e |
283 | " (You may need to build a new perl executable which either supports\n". |
284 | " dynamic loading or has the $module module statically linked into it.)\n") |
285 | unless defined(&dl_load_file); |
286 | |
59ad941d |
287 | |
1c7f9087 |
288 | <<$^O-eq-os2>> |
59ad941d |
289 | # Can dynaload, but cannot dynaload Perl modules... |
290 | die 'Dynaloaded Perl modules are not available in this build of Perl' if $OS2::is_static; |
291 | |
1c7f9087 |
292 | <</$^O-eq-os2>> |
8e07c86e |
293 | my @modparts = split(/::/,$module); |
294 | my $modfname = $modparts[-1]; |
295 | |
296 | # Some systems have restrictions on files names for DLL's etc. |
297 | # mod2fname returns appropriate file base name (typically truncated) |
298 | # It may also edit @modparts if required. |
299 | $modfname = &mod2fname(\@modparts) if defined &mod2fname; |
300 | |
1c7f9087 |
301 | <<$^O-eq-NetWare>> |
1a95e36d |
302 | # Truncate the module name to 8.3 format for NetWare |
1c7f9087 |
303 | if ((length($modfname) > 8)) { |
f355267c |
304 | $modfname = substr($modfname, 0, 8); |
305 | } |
1c7f9087 |
306 | <</$^O-eq-NetWare>> |
f355267c |
307 | |
1c7f9087 |
308 | my $modpname = join(<<$^O-eq-MacOS>>':'<<|$^O-eq-MacOS>>'/'<</$^O-eq-MacOS>>,@modparts); |
8e07c86e |
309 | |
310 | print STDERR "DynaLoader::bootstrap for $module ", |
1c7f9087 |
311 | <<$^O-eq-MacOS>> "(:auto:$modpname:$modfname.<<=$dl_dlext>>)\n" |
312 | <<|$^O-eq-MacOS>>"(auto/$modpname/$modfname.<<=$dl_dlext>>)\n"<</$^O-eq-MacOS>> |
146174a9 |
313 | if $dl_debug; |
8e07c86e |
314 | |
315 | foreach (@INC) { |
1c7f9087 |
316 | <<$^O-eq-VMS>>chop($_ = VMS::Filespec::unixpath($_));<</$^O-eq-VMS>> |
317 | <<$^O-eq-MacOS>> |
e69a2255 |
318 | my $path = $_; |
5b865721 |
319 | if ($Mac_FS && ! -d $path) { |
d5201bd2 |
320 | $path = Mac::FileSpec::Unixish::nativize($path); |
321 | } |
e69a2255 |
322 | $path .= ":" unless /:$/; |
1c7f9087 |
323 | my $dir = "${path}auto:$modpname"; |
324 | <<|$^O-eq-MacOS>> |
325 | my $dir = "$_/auto/$modpname"; |
326 | <</$^O-eq-MacOS>> |
1a95e36d |
327 | |
328 | next unless -d $dir; # skip over uninteresting directories |
329 | |
8e07c86e |
330 | # check for common cases to avoid autoload of dl_findfile |
1c7f9087 |
331 | my $try = <<$^O-eq-MacOS>> "$dir:$modfname.<<=$dl_dlext>>" <<|$^O-eq-MacOS>> "$dir/$modfname.<<=$dl_dlext>>"<</$^O-eq-MacOS>>; |
332 | last if $file = <<$^O-eq-VMS>>($do_expand) ? dl_expandspec($try) : ((-f $try) && $try); |
333 | <<|$^O-eq-VMS>>(-f $try) && $try; |
334 | <</$^O-eq-VMS>> |
1a95e36d |
335 | |
8e07c86e |
336 | # no luck here, save dir for possible later dl_findfile search |
fb73857a |
337 | push @dirs, $dir; |
8e07c86e |
338 | } |
339 | # last resort, let dl_findfile have a go in all known locations |
fb73857a |
340 | $file = dl_findfile(map("-L$_",@dirs,@INC), $modfname) unless $file; |
8e07c86e |
341 | |
fb73857a |
342 | croak("Can't locate loadable object for module $module in \@INC (\@INC contains: @INC)") |
343 | unless $file; # wording similar to error from 'require' |
8e07c86e |
344 | |
1c7f9087 |
345 | <<$^O-eq-VMS>>$file = uc($file) if $Config::Config{d_vms_case_sensitive_symbols};<</$^O-eq-VMS>> |
8e07c86e |
346 | my $bootname = "boot_$module"; |
347 | $bootname =~ s/\W/_/g; |
348 | @dl_require_symbols = ($bootname); |
349 | |
350 | # Execute optional '.bootstrap' perl script for this module. |
351 | # The .bs file can be used to configure @dl_resolve_using etc to |
352 | # match the needs of the individual module on this architecture. |
353 | my $bs = $file; |
3f45a6dd |
354 | $bs =~ s/(\.\w+)?(;\d*)?$/\.bs/; # look for .bs 'beside' the library |
8e07c86e |
355 | if (-s $bs) { # only read file if it's not empty |
d404d5bf |
356 | print STDERR "BS: $bs ($^O, $dlsrc)\n" if $dl_debug; |
8e07c86e |
357 | eval { do $bs; }; |
358 | warn "$bs: $@\n" if $@; |
359 | } |
360 | |
588cafc8 |
361 | my $boot_symbol_ref; |
362 | |
1c7f9087 |
363 | <<$^O-eq-darwin>> |
364 | if ($boot_symbol_ref = dl_find_symbol(0, $bootname)) { |
365 | goto boot; #extension library has already been loaded, e.g. darwin |
588cafc8 |
366 | } |
1c7f9087 |
367 | <</$^O-eq-darwin>> |
588cafc8 |
368 | |
8e07c86e |
369 | # Many dynamic extension loading problems will appear to come from |
370 | # this section of code: XYZ failed at line 123 of DynaLoader.pm. |
371 | # Often these errors are actually occurring in the initialisation |
372 | # C code of the extension XS file. Perl reports the error as being |
373 | # in this perl code simply because this was the last perl code |
374 | # it executed. |
375 | |
ff7f3c60 |
376 | my $libref = dl_load_file($file, $module->dl_load_flags) or |
549a6b10 |
377 | croak("Can't load '$file' for module $module: ".dl_error()); |
8e07c86e |
378 | |
ff7f3c60 |
379 | push(@dl_librefs,$libref); # record loaded object |
380 | |
8e07c86e |
381 | my @unresolved = dl_undef_symbols(); |
fb73857a |
382 | if (@unresolved) { |
383 | require Carp; |
384 | Carp::carp("Undefined symbols present after loading $file: @unresolved\n"); |
385 | } |
8e07c86e |
386 | |
588cafc8 |
387 | $boot_symbol_ref = dl_find_symbol($libref, $bootname) or |
fb73857a |
388 | croak("Can't find '$bootname' symbol in $file\n"); |
8e07c86e |
389 | |
ff7f3c60 |
390 | push(@dl_modules, $module); # record loaded module |
391 | |
588cafc8 |
392 | boot: |
393 | my $xs = dl_install_xsub("${module}::bootstrap", $boot_symbol_ref, $file); |
394 | |
8e07c86e |
395 | # See comment block above |
8cf57410 |
396 | |
397 | push(@dl_shared_objects, $file); # record files loaded |
398 | |
8e07c86e |
399 | &$xs(@args); |
400 | } |
401 | |
402 | |
fb73857a |
403 | #sub _check_file { # private utility to handle dl_expandspec vs -f tests |
404 | # my($file) = @_; |
405 | # return $file if (!$do_expand && -f $file); # the common case |
406 | # return $file if ( $do_expand && ($file=dl_expandspec($file))); |
407 | # return undef; |
408 | #} |
8e07c86e |
409 | |
410 | |
411 | # Let autosplit and the autoloader deal with these functions: |
412 | __END__ |
413 | |
414 | |
415 | sub dl_findfile { |
416 | # Read ext/DynaLoader/DynaLoader.doc for detailed information. |
417 | # This function does not automatically consider the architecture |
418 | # or the perl library auto directories. |
419 | my (@args) = @_; |
420 | my (@dirs, $dir); # which directories to search |
421 | my (@found); # full paths to real files we have found |
1c7f9087 |
422 | #my $dl_ext= <<=to_string($Config::Config{'dlext'})>>; # $Config::Config{'dlext'} suffix for perl extensions |
423 | #my $dl_so = <<=to_string($Config::Config{'so'})>>; # $Config::Config{'so'} suffix for shared libraries |
8e07c86e |
424 | |
425 | print STDERR "dl_findfile(@args)\n" if $dl_debug; |
426 | |
427 | # accumulate directories but process files as they appear |
428 | arg: foreach(@args) { |
429 | # Special fast case: full filepath requires no search |
1c7f9087 |
430 | <<$^O-eq-VMS>> |
431 | if (m%[:>/\]]% && -f $_) { |
54d6a3b3 |
432 | push(@found,dl_expandspec(VMS::Filespec::vmsify($_))); |
433 | last arg unless wantarray; |
434 | next; |
435 | } |
1c7f9087 |
436 | <</$^O-eq-VMS>> |
437 | <<$^O-eq-MacOS>> |
146174a9 |
438 | if (m/:/ && -f $_) { |
439 | push(@found,$_); |
440 | last arg unless wantarray; |
441 | } |
1c7f9087 |
442 | <</$^O-eq-MacOS>> |
443 | <<$^O-ne-VMS>> |
444 | if (m:/: && -f $_) { |
8e07c86e |
445 | push(@found,$_); |
446 | last arg unless wantarray; |
447 | next; |
448 | } |
1c7f9087 |
449 | <</$^O-ne-VMS>> |
8e07c86e |
450 | |
451 | # Deal with directories first: |
452 | # Using a -L prefix is the preferred option (faster and more robust) |
453 | if (m:^-L:) { s/^-L//; push(@dirs, $_); next; } |
454 | |
1c7f9087 |
455 | <<$^O-eq-MacOS>> |
146174a9 |
456 | # Otherwise we try to try to spot directories by a heuristic |
457 | # (this is a more complicated issue than it first appears) |
458 | if (m/:/ && -d $_) { push(@dirs, $_); next; } |
459 | # Only files should get this far... |
460 | my(@names, $name); # what filenames to look for |
461 | s/^-l//; |
462 | push(@names, $_); |
463 | foreach $dir (@dirs, @dl_library_path) { |
464 | next unless -d $dir; |
465 | $dir =~ s/^([^:]+)$/:$1/; |
466 | $dir =~ s/:$//; |
467 | foreach $name (@names) { |
468 | my($file) = "$dir:$name"; |
469 | print STDERR " checking in $dir for $name\n" if $dl_debug; |
470 | if (-f $file) { |
471 | push(@found, $file); |
472 | next arg; # no need to look any further |
473 | } |
474 | } |
475 | } |
476 | next; |
1c7f9087 |
477 | <</$^O-eq-MacOS>> |
146174a9 |
478 | |
8e07c86e |
479 | # Otherwise we try to try to spot directories by a heuristic |
480 | # (this is a more complicated issue than it first appears) |
481 | if (m:/: && -d $_) { push(@dirs, $_); next; } |
482 | |
1c7f9087 |
483 | <<$^O-eq-VMS>> |
7e9f3af8 |
484 | # VMS: we may be using native VMS directory syntax instead of |
8e07c86e |
485 | # Unix emulation, so check this as well |
1c7f9087 |
486 | if (/[:>\]]/ && -d $_) { push(@dirs, $_); next; } |
487 | <</$^O-eq-VMS>> |
8e07c86e |
488 | |
489 | # Only files should get this far... |
490 | my(@names, $name); # what filenames to look for |
491 | if (m:-l: ) { # convert -lname to appropriate library name |
492 | s/-l//; |
1c7f9087 |
493 | push(@names,"lib$_.<<=to_string($Config::Config{'so'})>>"); |
8e07c86e |
494 | push(@names,"lib$_.a"); |
495 | } else { # Umm, a bare name. Try various alternatives: |
496 | # these should be ordered with the most likely first |
1c7f9087 |
497 | push(@names,"$_.<<=$dl_dlext>>") unless m/\.<<=$dl_dlext>>$/o; |
498 | push(@names,"$_.<<=$dl_so>>") unless m/\.<<=$dl_so>>$/o; |
499 | push(@names,"lib$_.<<=$dl_so>>") unless m:/:; |
8e07c86e |
500 | push(@names,"$_.a") if !m/\.a$/ and $dlsrc eq "dl_dld.xs"; |
501 | push(@names, $_); |
502 | } |
27da23d5 |
503 | my $dirsep = '/'; |
504 | <<$^O-eq-symbian>> |
505 | $dirsep = '\\'; |
506 | if ($0 =~ /^([a-z]):/i) { |
507 | my $drive = $1; |
508 | @dirs = map { "$drive:$_" } @dirs; |
509 | @dl_library_path = map { "$drive:$_" } @dl_library_path; |
510 | } |
511 | <</$^O-eq-symbian>> |
8e07c86e |
512 | foreach $dir (@dirs, @dl_library_path) { |
513 | next unless -d $dir; |
1c7f9087 |
514 | <<$^O-eq-VMS>> |
515 | chop($dir = VMS::Filespec::unixpath($dir)); |
516 | <</$^O-eq-VMS>> |
8e07c86e |
517 | foreach $name (@names) { |
27da23d5 |
518 | my($file) = "$dir$dirsep$name"; |
8e07c86e |
519 | print STDERR " checking in $dir for $name\n" if $dl_debug; |
fb73857a |
520 | $file = ($do_expand) ? dl_expandspec($file) : (-f $file && $file); |
521 | #$file = _check_file($file); |
8e07c86e |
522 | if ($file) { |
523 | push(@found, $file); |
524 | next arg; # no need to look any further |
525 | } |
526 | } |
527 | } |
528 | } |
529 | if ($dl_debug) { |
530 | foreach(@dirs) { |
531 | print STDERR " dl_findfile ignored non-existent directory: $_\n" unless -d $_; |
532 | } |
533 | print STDERR "dl_findfile found: @found\n"; |
534 | } |
535 | return $found[0] unless wantarray; |
536 | @found; |
537 | } |
538 | |
539 | |
540 | sub dl_expandspec { |
541 | my($spec) = @_; |
542 | # Optional function invoked if DynaLoader.pm sets $do_expand. |
543 | # Most systems do not require or use this function. |
544 | # Some systems may implement it in the dl_*.xs file in which case |
545 | # this autoload version will not be called but is harmless. |
546 | |
547 | # This function is designed to deal with systems which treat some |
548 | # 'filenames' in a special way. For example VMS 'Logical Names' |
549 | # (something like unix environment variables - but different). |
550 | # This function should recognise such names and expand them into |
551 | # full file paths. |
552 | # Must return undef if $spec is invalid or file does not exist. |
553 | |
554 | my $file = $spec; # default output to input |
555 | |
1c7f9087 |
556 | <<$^O-eq-VMS>> |
557 | # dl_expandspec should be defined in dl_vms.xs |
fb73857a |
558 | require Carp; |
4633a7c4 |
559 | Carp::croak("dl_expandspec: should be defined in XS file!\n"); |
1c7f9087 |
560 | <<|$^O-eq-VMS>> |
8e07c86e |
561 | return undef unless -f $file; |
1c7f9087 |
562 | <</$^O-eq-VMS>> |
8e07c86e |
563 | print STDERR "dl_expandspec($spec) => $file\n" if $dl_debug; |
564 | $file; |
565 | } |
566 | |
ff7f3c60 |
567 | sub dl_find_symbol_anywhere |
568 | { |
569 | my $sym = shift; |
570 | my $libref; |
571 | foreach $libref (@dl_librefs) { |
572 | my $symref = dl_find_symbol($libref,$sym); |
573 | return $symref if $symref; |
574 | } |
575 | return undef; |
576 | } |
8e07c86e |
577 | |
3b35bae3 |
578 | =head1 NAME |
579 | |
580 | DynaLoader - Dynamically load C libraries into Perl code |
581 | |
3b35bae3 |
582 | =head1 SYNOPSIS |
583 | |
8e07c86e |
584 | package YourPackage; |
3b35bae3 |
585 | require DynaLoader; |
c2960299 |
586 | @ISA = qw(... DynaLoader ...); |
8e07c86e |
587 | bootstrap YourPackage; |
3b35bae3 |
588 | |
ff7f3c60 |
589 | # optional method for 'global' loading |
590 | sub dl_load_flags { 0x01 } |
591 | |
3b35bae3 |
592 | |
593 | =head1 DESCRIPTION |
594 | |
c2960299 |
595 | This document defines a standard generic interface to the dynamic |
3b35bae3 |
596 | linking mechanisms available on many platforms. Its primary purpose is |
597 | to implement automatic dynamic loading of Perl modules. |
598 | |
c2960299 |
599 | This document serves as both a specification for anyone wishing to |
600 | implement the DynaLoader for a new platform and as a guide for |
601 | anyone wishing to use the DynaLoader directly in an application. |
602 | |
3b35bae3 |
603 | The DynaLoader is designed to be a very simple high-level |
604 | interface that is sufficiently general to cover the requirements |
605 | of SunOS, HP-UX, NeXT, Linux, VMS and other platforms. |
606 | |
c2960299 |
607 | It is also hoped that the interface will cover the needs of OS/2, NT |
608 | etc and also allow pseudo-dynamic linking (using C<ld -A> at runtime). |
3b35bae3 |
609 | |
610 | It must be stressed that the DynaLoader, by itself, is practically |
611 | useless for accessing non-Perl libraries because it provides almost no |
612 | Perl-to-C 'glue'. There is, for example, no mechanism for calling a C |
03c9e98c |
613 | library function or supplying arguments. A C::DynaLib module |
90248788 |
614 | is available from CPAN sites which performs that function for some |
1f98619c |
615 | common system types. And since the year 2000, there's also Inline::C, |
616 | a module that allows you to write Perl subroutines in C. Also available |
617 | from your local CPAN site. |
3b35bae3 |
618 | |
619 | DynaLoader Interface Summary |
620 | |
621 | @dl_library_path |
622 | @dl_resolve_using |
623 | @dl_require_symbols |
624 | $dl_debug |
ff7f3c60 |
625 | @dl_librefs |
626 | @dl_modules |
8cf57410 |
627 | @dl_shared_objects |
3b35bae3 |
628 | Implemented in: |
629 | bootstrap($modulename) Perl |
630 | @filepaths = dl_findfile(@names) Perl |
ff7f3c60 |
631 | $flags = $modulename->dl_load_flags Perl |
632 | $symref = dl_find_symbol_anywhere($symbol) Perl |
3b35bae3 |
633 | |
ff7f3c60 |
634 | $libref = dl_load_file($filename, $flags) C |
abb9e9dc |
635 | $status = dl_unload_file($libref) C |
3b35bae3 |
636 | $symref = dl_find_symbol($libref, $symbol) C |
637 | @symbols = dl_undef_symbols() C |
638 | dl_install_xsub($name, $symref [, $filename]) C |
639 | $message = dl_error C |
640 | |
641 | =over 4 |
642 | |
643 | =item @dl_library_path |
644 | |
645 | The standard/default list of directories in which dl_findfile() will |
646 | search for libraries etc. Directories are searched in order: |
647 | $dl_library_path[0], [1], ... etc |
648 | |
649 | @dl_library_path is initialised to hold the list of 'normal' directories |
650 | (F</usr/lib>, etc) determined by B<Configure> (C<$Config{'libpth'}>). This should |
651 | ensure portability across a wide range of platforms. |
652 | |
653 | @dl_library_path should also be initialised with any other directories |
654 | that can be determined from the environment at runtime (such as |
655 | LD_LIBRARY_PATH for SunOS). |
656 | |
657 | After initialisation @dl_library_path can be manipulated by an |
658 | application using push and unshift before calling dl_findfile(). |
659 | Unshift can be used to add directories to the front of the search order |
660 | either to save search time or to override libraries with the same name |
661 | in the 'normal' directories. |
662 | |
663 | The load function that dl_load_file() calls may require an absolute |
664 | pathname. The dl_findfile() function and @dl_library_path can be |
665 | used to search for and return the absolute pathname for the |
666 | library/object that you wish to load. |
667 | |
668 | =item @dl_resolve_using |
669 | |
670 | A list of additional libraries or other shared objects which can be |
671 | used to resolve any undefined symbols that might be generated by a |
672 | later call to load_file(). |
673 | |
674 | This is only required on some platforms which do not handle dependent |
7a2e2cd6 |
675 | libraries automatically. For example the Socket Perl extension |
676 | library (F<auto/Socket/Socket.so>) contains references to many socket |
677 | functions which need to be resolved when it's loaded. Most platforms |
678 | will automatically know where to find the 'dependent' library (e.g., |
679 | F</usr/lib/libsocket.so>). A few platforms need to be told the |
680 | location of the dependent library explicitly. Use @dl_resolve_using |
681 | for this. |
3b35bae3 |
682 | |
683 | Example usage: |
684 | |
685 | @dl_resolve_using = dl_findfile('-lsocket'); |
686 | |
687 | =item @dl_require_symbols |
688 | |
689 | A list of one or more symbol names that are in the library/object file |
690 | to be dynamically loaded. This is only required on some platforms. |
691 | |
ff7f3c60 |
692 | =item @dl_librefs |
693 | |
694 | An array of the handles returned by successful calls to dl_load_file(), |
695 | made by bootstrap, in the order in which they were loaded. |
696 | Can be used with dl_find_symbol() to look for a symbol in any of |
697 | the loaded files. |
698 | |
699 | =item @dl_modules |
700 | |
701 | An array of module (package) names that have been bootstrap'ed. |
702 | |
8cf57410 |
703 | =item @dl_shared_objects |
704 | |
705 | An array of file names for the shared objects that were loaded. |
706 | |
3b35bae3 |
707 | =item dl_error() |
708 | |
709 | Syntax: |
710 | |
711 | $message = dl_error(); |
712 | |
713 | Error message text from the last failed DynaLoader function. Note |
714 | that, similar to errno in unix, a successful function call does not |
715 | reset this message. |
716 | |
717 | Implementations should detect the error as soon as it occurs in any of |
718 | the other functions and save the corresponding message for later |
719 | retrieval. This will avoid problems on some platforms (such as SunOS) |
720 | where the error message is very temporary (e.g., dlerror()). |
721 | |
722 | =item $dl_debug |
723 | |
724 | Internal debugging messages are enabled when $dl_debug is set true. |
725 | Currently setting $dl_debug only affects the Perl side of the |
726 | DynaLoader. These messages should help an application developer to |
727 | resolve any DynaLoader usage problems. |
728 | |
729 | $dl_debug is set to C<$ENV{'PERL_DL_DEBUG'}> if defined. |
730 | |
731 | For the DynaLoader developer/porter there is a similar debugging |
732 | variable added to the C code (see dlutils.c) and enabled if Perl was |
733 | built with the B<-DDEBUGGING> flag. This can also be set via the |
734 | PERL_DL_DEBUG environment variable. Set to 1 for minimal information or |
735 | higher for more. |
736 | |
737 | =item dl_findfile() |
738 | |
739 | Syntax: |
740 | |
741 | @filepaths = dl_findfile(@names) |
742 | |
743 | Determine the full paths (including file suffix) of one or more |
744 | loadable files given their generic names and optionally one or more |
745 | directories. Searches directories in @dl_library_path by default and |
746 | returns an empty list if no files were found. |
747 | |
748 | Names can be specified in a variety of platform independent forms. Any |
749 | names in the form B<-lname> are converted into F<libname.*>, where F<.*> is |
750 | an appropriate suffix for the platform. |
751 | |
752 | If a name does not already have a suitable prefix and/or suffix then |
753 | the corresponding file will be searched for by trying combinations of |
754 | prefix and suffix appropriate to the platform: "$name.o", "lib$name.*" |
755 | and "$name". |
756 | |
757 | If any directories are included in @names they are searched before |
c2960299 |
758 | @dl_library_path. Directories may be specified as B<-Ldir>. Any other |
759 | names are treated as filenames to be searched for. |
3b35bae3 |
760 | |
761 | Using arguments of the form C<-Ldir> and C<-lname> is recommended. |
762 | |
763 | Example: |
764 | |
765 | @dl_resolve_using = dl_findfile(qw(-L/usr/5lib -lposix)); |
766 | |
767 | |
768 | =item dl_expandspec() |
769 | |
770 | Syntax: |
771 | |
772 | $filepath = dl_expandspec($spec) |
773 | |
774 | Some unusual systems, such as VMS, require special filename handling in |
775 | order to deal with symbolic names for files (i.e., VMS's Logical Names). |
776 | |
777 | To support these systems a dl_expandspec() function can be implemented |
778 | either in the F<dl_*.xs> file or code can be added to the autoloadable |
c2960299 |
779 | dl_expandspec() function in F<DynaLoader.pm>. See F<DynaLoader.pm> for |
780 | more information. |
3b35bae3 |
781 | |
782 | =item dl_load_file() |
783 | |
784 | Syntax: |
785 | |
ff7f3c60 |
786 | $libref = dl_load_file($filename, $flags) |
3b35bae3 |
787 | |
788 | Dynamically load $filename, which must be the path to a shared object |
789 | or library. An opaque 'library reference' is returned as a handle for |
790 | the loaded object. Returns undef on error. |
791 | |
ff7f3c60 |
792 | The $flags argument to alters dl_load_file behaviour. |
793 | Assigned bits: |
794 | |
795 | 0x01 make symbols available for linking later dl_load_file's. |
796 | (only known to work on Solaris 2 using dlopen(RTLD_GLOBAL)) |
f86702cc |
797 | (ignored under VMS; this is a normal part of image linking) |
ff7f3c60 |
798 | |
3b35bae3 |
799 | (On systems that provide a handle for the loaded object such as SunOS |
800 | and HPUX, $libref will be that handle. On other systems $libref will |
801 | typically be $filename or a pointer to a buffer containing $filename. |
802 | The application should not examine or alter $libref in any way.) |
803 | |
ff7f3c60 |
804 | This is the function that does the real work. It should use the |
805 | current values of @dl_require_symbols and @dl_resolve_using if required. |
3b35bae3 |
806 | |
807 | SunOS: dlopen($filename) |
808 | HP-UX: shl_load($filename) |
809 | Linux: dld_create_reference(@dl_require_symbols); dld_link($filename) |
810 | NeXT: rld_load($filename, @dl_resolve_using) |
811 | VMS: lib$find_image_symbol($filename,$dl_require_symbols[0]) |
812 | |
ff7f3c60 |
813 | (The dlopen() function is also used by Solaris and some versions of |
814 | Linux, and is a common choice when providing a "wrapper" on other |
815 | mechanisms as is done in the OS/2 port.) |
816 | |
abb9e9dc |
817 | =item dl_unload_file() |
818 | |
819 | Syntax: |
820 | |
821 | $status = dl_unload_file($libref) |
822 | |
823 | Dynamically unload $libref, which must be an opaque 'library reference' as |
824 | returned from dl_load_file. Returns one on success and zero on failure. |
825 | |
826 | This function is optional and may not necessarily be provided on all platforms. |
827 | If it is defined, it is called automatically when the interpreter exits for |
828 | every shared object or library loaded by DynaLoader::bootstrap. All such |
829 | library references are stored in @dl_librefs by DynaLoader::Bootstrap as it |
22851543 |
830 | loads the libraries. The files are unloaded in last-in, first-out order. |
abb9e9dc |
831 | |
832 | This unloading is usually necessary when embedding a shared-object perl (e.g. |
833 | one configured with -Duseshrplib) within a larger application, and the perl |
834 | interpreter is created and destroyed several times within the lifetime of the |
835 | application. In this case it is possible that the system dynamic linker will |
836 | unload and then subsequently reload the shared libperl without relocating any |
837 | references to it from any files DynaLoaded by the previous incarnation of the |
838 | interpreter. As a result, any shared objects opened by DynaLoader may point to |
839 | a now invalid 'ghost' of the libperl shared object, causing apparently random |
840 | memory corruption and crashes. This behaviour is most commonly seen when using |
841 | Apache and mod_perl built with the APXS mechanism. |
842 | |
843 | SunOS: dlclose($libref) |
844 | HP-UX: ??? |
845 | Linux: ??? |
846 | NeXT: ??? |
847 | VMS: ??? |
848 | |
849 | (The dlclose() function is also used by Solaris and some versions of |
850 | Linux, and is a common choice when providing a "wrapper" on other |
851 | mechanisms as is done in the OS/2 port.) |
852 | |
2307c6d0 |
853 | =item dl_load_flags() |
ff7f3c60 |
854 | |
855 | Syntax: |
856 | |
2307c6d0 |
857 | $flags = dl_load_flags $modulename; |
ff7f3c60 |
858 | |
859 | Designed to be a method call, and to be overridden by a derived class |
860 | (i.e. a class which has DynaLoader in its @ISA). The definition in |
861 | DynaLoader itself returns 0, which produces standard behavior from |
862 | dl_load_file(). |
3b35bae3 |
863 | |
864 | =item dl_find_symbol() |
865 | |
866 | Syntax: |
867 | |
868 | $symref = dl_find_symbol($libref, $symbol) |
869 | |
870 | Return the address of the symbol $symbol or C<undef> if not found. If the |
871 | target system has separate functions to search for symbols of different |
872 | types then dl_find_symbol() should search for function symbols first and |
873 | then other types. |
874 | |
875 | The exact manner in which the address is returned in $symref is not |
876 | currently defined. The only initial requirement is that $symref can |
877 | be passed to, and understood by, dl_install_xsub(). |
878 | |
879 | SunOS: dlsym($libref, $symbol) |
880 | HP-UX: shl_findsym($libref, $symbol) |
881 | Linux: dld_get_func($symbol) and/or dld_get_symbol($symbol) |
882 | NeXT: rld_lookup("_$symbol") |
883 | VMS: lib$find_image_symbol($libref,$symbol) |
884 | |
885 | |
ff7f3c60 |
886 | =item dl_find_symbol_anywhere() |
887 | |
888 | Syntax: |
889 | |
890 | $symref = dl_find_symbol_anywhere($symbol) |
891 | |
892 | Applies dl_find_symbol() to the members of @dl_librefs and returns |
893 | the first match found. |
894 | |
3b35bae3 |
895 | =item dl_undef_symbols() |
896 | |
897 | Example |
898 | |
899 | @symbols = dl_undef_symbols() |
900 | |
901 | Return a list of symbol names which remain undefined after load_file(). |
902 | Returns C<()> if not known. Don't worry if your platform does not provide |
c2960299 |
903 | a mechanism for this. Most do not need it and hence do not provide it, |
904 | they just return an empty list. |
3b35bae3 |
905 | |
906 | |
907 | =item dl_install_xsub() |
908 | |
909 | Syntax: |
910 | |
911 | dl_install_xsub($perl_name, $symref [, $filename]) |
912 | |
913 | Create a new Perl external subroutine named $perl_name using $symref as |
914 | a pointer to the function which implements the routine. This is simply |
915 | a direct call to newXSUB(). Returns a reference to the installed |
916 | function. |
917 | |
918 | The $filename parameter is used by Perl to identify the source file for |
919 | the function if required by die(), caller() or the debugger. If |
920 | $filename is not defined then "DynaLoader" will be used. |
921 | |
922 | |
1fef88e7 |
923 | =item bootstrap() |
3b35bae3 |
924 | |
925 | Syntax: |
926 | |
927 | bootstrap($module) |
928 | |
929 | This is the normal entry point for automatic dynamic loading in Perl. |
930 | |
931 | It performs the following actions: |
932 | |
933 | =over 8 |
934 | |
935 | =item * |
936 | |
937 | locates an auto/$module directory by searching @INC |
938 | |
939 | =item * |
940 | |
941 | uses dl_findfile() to determine the filename to load |
942 | |
943 | =item * |
944 | |
945 | sets @dl_require_symbols to C<("boot_$module")> |
946 | |
947 | =item * |
948 | |
949 | executes an F<auto/$module/$module.bs> file if it exists |
950 | (typically used to add to @dl_resolve_using any files which |
951 | are required to load the module on the current platform) |
952 | |
953 | =item * |
954 | |
ff7f3c60 |
955 | calls dl_load_flags() to determine how to load the file. |
956 | |
957 | =item * |
958 | |
3b35bae3 |
959 | calls dl_load_file() to load the file |
960 | |
961 | =item * |
962 | |
963 | calls dl_undef_symbols() and warns if any symbols are undefined |
964 | |
965 | =item * |
966 | |
967 | calls dl_find_symbol() for "boot_$module" |
968 | |
969 | =item * |
970 | |
971 | calls dl_install_xsub() to install it as "${module}::bootstrap" |
972 | |
973 | =item * |
974 | |
8e07c86e |
975 | calls &{"${module}::bootstrap"} to bootstrap the module (actually |
976 | it uses the function reference returned by dl_install_xsub for speed) |
3b35bae3 |
977 | |
978 | =back |
979 | |
980 | =back |
981 | |
982 | |
983 | =head1 AUTHOR |
984 | |
c2960299 |
985 | Tim Bunce, 11 August 1994. |
986 | |
3b35bae3 |
987 | This interface is based on the work and comments of (in no particular |
988 | order): Larry Wall, Robert Sanders, Dean Roehrich, Jeff Okamoto, Anno |
c2960299 |
989 | Siegel, Thomas Neumann, Paul Marquess, Charles Bailey, myself and others. |
3b35bae3 |
990 | |
991 | Larry Wall designed the elegant inherited bootstrap mechanism and |
992 | implemented the first Perl 5 dynamic loader using it. |
993 | |
ff7f3c60 |
994 | Solaris global loading added by Nick Ing-Simmons with design/coding |
995 | assistance from Tim Bunce, January 1996. |
996 | |
3b35bae3 |
997 | =cut |
03c9e98c |
998 | EOT |
999 | |
1000 | close OUT or die $!; |
1001 | |