Commit | Line | Data |
8d063cd8 |
1 | case $CONFIG in |
2 | '') |
2304df62 |
3 | if test -f config.sh; then TOP=.; |
4 | elif test -f ../config.sh; then TOP=..; |
5 | elif test -f ../../config.sh; then TOP=../..; |
6 | elif test -f ../../../config.sh; then TOP=../../..; |
7 | elif test -f ../../../../config.sh; then TOP=../../../..; |
8 | else |
9 | echo "Can't find config.sh."; exit 1 |
10 | fi |
11 | . $TOP/config.sh |
12 | ;; |
13 | esac |
14 | case "$0" in |
15 | */*) cd `expr X$0 : 'X\(.*\)/'` ;; |
8d063cd8 |
16 | esac |
17 | echo "Extracting config.h (with variable substitutions)" |
a26b0745 |
18 | sed <<!GROK!THIS! >config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-def!#undef!' |
2304df62 |
19 | /* |
20 | * This file was produced by running the config_h.SH script, which |
8d063cd8 |
21 | * gets its values from config.sh, which is generally produced by |
22 | * running Configure. |
23 | * |
24 | * Feel free to modify any of this as the need arises. Note, however, |
1aef975c |
25 | * that running config_h.SH again will wipe out any changes you've made. |
26 | * For a more permanent change edit config.sh and rerun config_h.SH. |
2304df62 |
27 | * |
dfe9444c |
28 | * \$Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $ |
8d063cd8 |
29 | */ |
30 | |
dfe9444c |
31 | /* |
32 | * Package name : $package |
33 | * Source directory : $src |
34 | * Configuration time: $cf_time |
35 | * Configured by : $cf_by |
36 | * Target system : $myuname |
2304df62 |
37 | */ |
8d063cd8 |
38 | |
2304df62 |
39 | #ifndef _config_h_ |
40 | #define _config_h_ |
41 | |
dfe9444c |
42 | /* LOC_SED: |
43 | * This symbol holds the complete pathname to the sed program. |
774d564b |
44 | */ |
dfe9444c |
45 | #define LOC_SED "$full_sed" /**/ |
774d564b |
46 | |
2304df62 |
47 | /* BIN: |
48 | * This symbol holds the path of the bin directory where the package will |
49 | * be installed. Program must be prepared to deal with ~name substitution. |
a687059c |
50 | */ |
2ae324a7 |
51 | /* BIN_EXP: |
52 | * This symbol is the filename expanded version of the BIN symbol, for |
53 | * programs that do not want to deal with that at run-time. |
54 | */ |
2304df62 |
55 | #define BIN "$bin" /**/ |
2ae324a7 |
56 | #define BIN_EXP "$binexp" /**/ |
a687059c |
57 | |
a0d0e21e |
58 | /* HAS_ALARM: |
59 | * This symbol, if defined, indicates that the alarm routine is |
60 | * available. |
61 | */ |
62 | #$d_alarm HAS_ALARM /**/ |
63 | |
ecfc5424 |
64 | /* HASATTRIBUTE: |
65 | * This symbol indicates the C compiler can check for function attributes, |
66 | * such as printf formats. This is normally only supported by GNU cc. |
67 | */ |
68 | #$d_attribut HASATTRIBUTE /**/ |
69 | #ifndef HASATTRIBUTE |
70 | #define __attribute__(_arg_) |
71 | #endif |
72 | |
2304df62 |
73 | /* HAS_BCMP: |
74 | * This symbol is defined if the bcmp() routine is available to |
75 | * compare blocks of memory. |
a687059c |
76 | */ |
2304df62 |
77 | #$d_bcmp HAS_BCMP /**/ |
a687059c |
78 | |
2304df62 |
79 | /* HAS_BCOPY: |
80 | * This symbol is defined if the bcopy() routine is available to |
81 | * copy blocks of memory. |
c51b80d1 |
82 | */ |
2304df62 |
83 | #$d_bcopy HAS_BCOPY /**/ |
c51b80d1 |
84 | |
2304df62 |
85 | /* HAS_BZERO: |
86 | * This symbol is defined if the bzero() routine is available to |
87 | * set a memory block to 0. |
0d3e774c |
88 | */ |
2304df62 |
89 | #$d_bzero HAS_BZERO /**/ |
0d3e774c |
90 | |
a0d0e21e |
91 | /* HAS_CHOWN: |
92 | * This symbol, if defined, indicates that the chown routine is |
93 | * available. |
94 | */ |
95 | #$d_chown HAS_CHOWN /**/ |
96 | |
97 | /* HAS_CHROOT: |
98 | * This symbol, if defined, indicates that the chroot routine is |
99 | * available. |
100 | */ |
101 | #$d_chroot HAS_CHROOT /**/ |
102 | |
2304df62 |
103 | /* HAS_CHSIZE: |
87250799 |
104 | * This symbol, if defined, indicates that the chsize routine is available |
105 | * to truncate files. You might need a -lx to get this routine. |
106 | */ |
fe14fcc3 |
107 | #$d_chsize HAS_CHSIZE /**/ |
87250799 |
108 | |
2304df62 |
109 | /* HASCONST: |
110 | * This symbol, if defined, indicates that this C compiler knows about |
111 | * the const type. There is no need to actually test for that symbol |
112 | * within your programs. The mere use of the "const" keyword will |
113 | * trigger the necessary tests. |
114 | */ |
115 | #$d_const HASCONST /**/ |
116 | #ifndef HASCONST |
117 | #define const |
118 | #endif |
119 | |
120 | /* HAS_CRYPT: |
2e1b3b7e |
121 | * This symbol, if defined, indicates that the crypt routine is available |
122 | * to encrypt passwords and the like. |
123 | */ |
2304df62 |
124 | #$d_crypt HAS_CRYPT /**/ |
2e1b3b7e |
125 | |
a0d0e21e |
126 | /* HAS_CUSERID: |
127 | * This symbol, if defined, indicates that the cuserid routine is |
128 | * available to get character login names. |
13281fa4 |
129 | */ |
a0d0e21e |
130 | #$d_cuserid HAS_CUSERID /**/ |
131 | |
132 | /* HAS_DBL_DIG: |
133 | * This symbol, if defined, indicates that this system's <float.h> |
134 | * or <limits.h> defines the symbol DBL_DIG, which is the number |
135 | * of significant digits in a double precision number. If this |
136 | * symbol is not defined, a guess of 15 is usually pretty good. |
137 | */ |
138 | #$d_dbl_dig HAS_DBL_DIG /* */ |
139 | |
140 | /* HAS_DIFFTIME: |
141 | * This symbol, if defined, indicates that the difftime routine is |
142 | * available. |
143 | */ |
144 | #$d_difftime HAS_DIFFTIME /**/ |
13281fa4 |
145 | |
ecfc5424 |
146 | /* HAS_DLERROR: |
147 | * This symbol, if defined, indicates that the dlerror routine is |
148 | * available to return a string describing the last error that |
149 | * occurred from a call to dlopen(), dlclose() or dlsym(). |
150 | */ |
151 | #$d_dlerror HAS_DLERROR /**/ |
152 | |
dfe9444c |
153 | /* SETUID_SCRIPTS_ARE_SECURE_NOW: |
154 | * This symbol, if defined, indicates that the bug that prevents |
155 | * setuid scripts from being secure is not present in this kernel. |
156 | */ |
157 | /* DOSUID: |
158 | * This symbol, if defined, indicates that the C program should |
159 | * check the script that it is executing for setuid/setgid bits, and |
160 | * attempt to emulate setuid/setgid on systems that have disabled |
161 | * setuid #! scripts because the kernel can't do it securely. |
162 | * It is up to the package designer to make sure that this emulation |
163 | * is done securely. Among other things, it should do an fstat on |
164 | * the script it just opened to make sure it really is a setuid/setgid |
165 | * script, it should make sure the arguments passed correspond exactly |
166 | * to the argument on the #! line, and it should not trust any |
167 | * subprocesses to which it must pass the filename rather than the |
168 | * file descriptor of the script to be executed. |
169 | */ |
170 | #$d_suidsafe SETUID_SCRIPTS_ARE_SECURE_NOW /**/ |
171 | #$d_dosuid DOSUID /**/ |
172 | |
2304df62 |
173 | /* HAS_DUP2: |
174 | * This symbol, if defined, indicates that the dup2 routine is |
175 | * available to duplicate file descriptors. |
a687059c |
176 | */ |
2304df62 |
177 | #$d_dup2 HAS_DUP2 /**/ |
a687059c |
178 | |
2304df62 |
179 | /* HAS_FCHMOD: |
378cc40b |
180 | * This symbol, if defined, indicates that the fchmod routine is available |
181 | * to change mode of opened files. If unavailable, use chmod(). |
182 | */ |
2304df62 |
183 | #$d_fchmod HAS_FCHMOD /**/ |
378cc40b |
184 | |
2304df62 |
185 | /* HAS_FCHOWN: |
378cc40b |
186 | * This symbol, if defined, indicates that the fchown routine is available |
187 | * to change ownership of opened files. If unavailable, use chown(). |
188 | */ |
2304df62 |
189 | #$d_fchown HAS_FCHOWN /**/ |
378cc40b |
190 | |
2304df62 |
191 | /* HAS_FCNTL: |
fe14fcc3 |
192 | * This symbol, if defined, indicates to the C program that |
193 | * the fcntl() function exists. |
a687059c |
194 | */ |
2304df62 |
195 | #$d_fcntl HAS_FCNTL /**/ |
a687059c |
196 | |
a0d0e21e |
197 | /* HAS_FGETPOS: |
198 | * This symbol, if defined, indicates that the fgetpos routine is |
199 | * available to get the file position indicator, similar to ftell(). |
200 | */ |
201 | #$d_fgetpos HAS_FGETPOS /**/ |
202 | |
2304df62 |
203 | /* FLEXFILENAMES: |
7e1cf235 |
204 | * This symbol, if defined, indicates that the system supports filenames |
205 | * longer than 14 characters. |
206 | */ |
207 | #$d_flexfnam FLEXFILENAMES /**/ |
208 | |
2304df62 |
209 | /* HAS_FLOCK: |
210 | * This symbol, if defined, indicates that the flock routine is |
a687059c |
211 | * available to do file locking. |
212 | */ |
2304df62 |
213 | #$d_flock HAS_FLOCK /**/ |
a687059c |
214 | |
a0d0e21e |
215 | /* HAS_FORK: |
216 | * This symbol, if defined, indicates that the fork routine is |
217 | * available. |
218 | */ |
219 | #$d_fork HAS_FORK /**/ |
220 | |
221 | /* HAS_FSETPOS: |
222 | * This symbol, if defined, indicates that the fsetpos routine is |
223 | * available to set the file position indicator, similar to fseek(). |
224 | */ |
225 | #$d_fsetpos HAS_FSETPOS /**/ |
226 | |
5f05dabc |
227 | /* HAS_GETTIMEOFDAY: |
228 | * This symbol, if defined, indicates that the gettimeofday() system |
229 | * call is available for a sub-second accuracy clock. Usually, the file |
230 | * <sys/resource.h> needs to be included (see I_SYS_RESOURCE). |
231 | * The type "Timeval" should be used to refer to "struct timeval". |
232 | */ |
233 | #$d_gettimeod HAS_GETTIMEOFDAY /**/ |
234 | #ifdef HAS_GETTIMEOFDAY |
235 | #define Timeval struct timeval /* Structure used by gettimeofday() */ |
236 | #endif |
237 | |
2304df62 |
238 | /* HAS_GETGROUPS: |
378cc40b |
239 | * This symbol, if defined, indicates that the getgroups() routine is |
240 | * available to get the list of process groups. If unavailable, multiple |
241 | * groups are probably not supported. |
242 | */ |
2304df62 |
243 | #$d_getgrps HAS_GETGROUPS /**/ |
378cc40b |
244 | |
a0d0e21e |
245 | /* HAS_GETLOGIN: |
246 | * This symbol, if defined, indicates that the getlogin routine is |
247 | * available to get the login name. |
248 | */ |
249 | #$d_getlogin HAS_GETLOGIN /**/ |
250 | |
dfe9444c |
251 | /* HAS_GETPGID: |
252 | * This symbol, if defined, indicates to the C program that |
253 | * the getpgid(pid) function is available to get the |
254 | * process group id. |
255 | */ |
256 | #$d_getpgid HAS_GETPGID /**/ |
257 | |
258 | /* HAS_GETPGRP: |
259 | * This symbol, if defined, indicates that the getpgrp routine is |
260 | * available to get the current process group. |
261 | */ |
262 | /* USE_BSD_GETPGRP: |
263 | * This symbol, if defined, indicates that getpgrp needs one |
264 | * arguments whereas USG one needs none. |
265 | */ |
266 | #$d_getpgrp HAS_GETPGRP /**/ |
267 | #$d_bsdgetpgrp USE_BSD_GETPGRP /**/ |
268 | |
2304df62 |
269 | /* HAS_GETPGRP2: |
d8f2e4cc |
270 | * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX) |
271 | * routine is available to get the current process group. |
272 | */ |
2304df62 |
273 | #$d_getpgrp2 HAS_GETPGRP2 /**/ |
d8f2e4cc |
274 | |
a0d0e21e |
275 | /* HAS_GETPPID: |
276 | * This symbol, if defined, indicates that the getppid routine is |
277 | * available to get the parent process ID. |
278 | */ |
279 | #$d_getppid HAS_GETPPID /**/ |
280 | |
2304df62 |
281 | /* HAS_GETPRIORITY: |
282 | * This symbol, if defined, indicates that the getpriority routine is |
a687059c |
283 | * available to get a process's priority. |
284 | */ |
2304df62 |
285 | #$d_getprior HAS_GETPRIORITY /**/ |
a687059c |
286 | |
dfe9444c |
287 | /* HAS_INET_ATON: |
288 | * This symbol, if defined, indicates to the C program that the |
289 | * inet_aton() function is available to parse IP address "dotted-quad" |
290 | * strings. |
ecfc5424 |
291 | */ |
dfe9444c |
292 | #$d_inetaton HAS_INET_ATON /**/ |
ecfc5424 |
293 | |
2304df62 |
294 | /* HAS_KILLPG: |
378cc40b |
295 | * This symbol, if defined, indicates that the killpg routine is available |
296 | * to kill process groups. If unavailable, you probably should use kill |
297 | * with a negative process number. |
298 | */ |
2304df62 |
299 | #$d_killpg HAS_KILLPG /**/ |
378cc40b |
300 | |
2304df62 |
301 | /* HAS_LINK: |
302 | * This symbol, if defined, indicates that the link routine is |
303 | * available to create hard links. |
0d3e774c |
304 | */ |
2304df62 |
305 | #$d_link HAS_LINK /**/ |
0d3e774c |
306 | |
ecfc5424 |
307 | /* HAS_LOCALECONV: |
308 | * This symbol, if defined, indicates that the localeconv routine is |
309 | * available for numeric and monetary formatting conventions. |
310 | */ |
311 | #$d_locconv HAS_LOCALECONV /**/ |
312 | |
a0d0e21e |
313 | /* HAS_LOCKF: |
314 | * This symbol, if defined, indicates that the lockf routine is |
315 | * available to do file locking. |
316 | */ |
317 | #$d_lockf HAS_LOCKF /**/ |
318 | |
2304df62 |
319 | /* HAS_LSTAT: |
320 | * This symbol, if defined, indicates that the lstat routine is |
321 | * available to do file stats on symbolic links. |
a687059c |
322 | */ |
2304df62 |
323 | #$d_lstat HAS_LSTAT /**/ |
a687059c |
324 | |
a0d0e21e |
325 | /* HAS_MBLEN: |
326 | * This symbol, if defined, indicates that the mblen routine is available |
327 | * to find the number of bytes in a multibye character. |
328 | */ |
329 | #$d_mblen HAS_MBLEN /**/ |
330 | |
331 | /* HAS_MBSTOWCS: |
332 | * This symbol, if defined, indicates that the mbstowcs routine is |
333 | * available to covert a multibyte string into a wide character string. |
334 | */ |
335 | #$d_mbstowcs HAS_MBSTOWCS /**/ |
336 | |
337 | /* HAS_MBTOWC: |
338 | * This symbol, if defined, indicates that the mbtowc routine is available |
339 | * to covert a multibyte to a wide character. |
340 | */ |
341 | #$d_mbtowc HAS_MBTOWC /**/ |
342 | |
2304df62 |
343 | /* HAS_MEMCMP: |
344 | * This symbol, if defined, indicates that the memcmp routine is available |
345 | * to compare blocks of memory. |
378cc40b |
346 | */ |
2304df62 |
347 | #$d_memcmp HAS_MEMCMP /**/ |
348 | |
349 | /* HAS_MEMCPY: |
9f971974 |
350 | * This symbol, if defined, indicates that the memcpy routine is available |
2304df62 |
351 | * to copy blocks of memory. |
9f971974 |
352 | */ |
2304df62 |
353 | #$d_memcpy HAS_MEMCPY /**/ |
9f971974 |
354 | |
2304df62 |
355 | /* HAS_MEMMOVE: |
9f971974 |
356 | * This symbol, if defined, indicates that the memmove routine is available |
2304df62 |
357 | * to copy potentially overlapping blocks of memory. This should be used |
358 | * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your |
359 | * own version. |
9f971974 |
360 | */ |
2304df62 |
361 | #$d_memmove HAS_MEMMOVE /**/ |
9f971974 |
362 | |
2304df62 |
363 | /* HAS_MEMSET: |
9f971974 |
364 | * This symbol, if defined, indicates that the memset routine is available |
2304df62 |
365 | * to set blocks of memory. |
9f971974 |
366 | */ |
2304df62 |
367 | #$d_memset HAS_MEMSET /**/ |
378cc40b |
368 | |
2304df62 |
369 | /* HAS_MKDIR: |
a687059c |
370 | * This symbol, if defined, indicates that the mkdir routine is available |
371 | * to create directories. Otherwise you should fork off a new process to |
372 | * exec /bin/mkdir. |
373 | */ |
2304df62 |
374 | #$d_mkdir HAS_MKDIR /**/ |
fe14fcc3 |
375 | |
ecfc5424 |
376 | /* HAS_MKFIFO: |
377 | * This symbol, if defined, indicates that the mkfifo routine is |
378 | * available to create FIFOs. Otherwise, mknod should be able to |
379 | * do it for you. However, if mkfifo is there, mknod might require |
380 | * super-user privileges which mkfifo will not. |
381 | */ |
382 | #$d_mkfifo HAS_MKFIFO /**/ |
383 | |
a0d0e21e |
384 | /* HAS_MKTIME: |
385 | * This symbol, if defined, indicates that the mktime routine is |
386 | * available. |
387 | */ |
388 | #$d_mktime HAS_MKTIME /**/ |
389 | |
ff49bff8 |
390 | /* HAS_MSYNC: |
391 | * This symbol, if defined, indicates that the msync system call is |
392 | * available to synchronize a mapped file. |
393 | */ |
394 | #$d_msync HAS_MSYNC /**/ |
395 | |
396 | /* HAS_MUNMAP: |
397 | * This symbol, if defined, indicates that the munmap system call is |
398 | * available to unmap a region, usually mapped by mmap(). |
399 | */ |
400 | #$d_munmap HAS_MUNMAP /**/ |
401 | |
a0d0e21e |
402 | /* HAS_NICE: |
403 | * This symbol, if defined, indicates that the nice routine is |
404 | * available. |
fe14fcc3 |
405 | */ |
a0d0e21e |
406 | #$d_nice HAS_NICE /**/ |
a687059c |
407 | |
ecfc5424 |
408 | /* HAS_PATHCONF: |
409 | * This symbol, if defined, indicates that pathconf() is available |
410 | * to determine file-system related limits and options associated |
411 | * with a given filename. |
412 | */ |
413 | /* HAS_FPATHCONF: |
414 | * This symbol, if defined, indicates that pathconf() is available |
415 | * to determine file-system related limits and options associated |
416 | * with a given open file descriptor. |
417 | */ |
418 | #$d_pathconf HAS_PATHCONF /**/ |
419 | #$d_fpathconf HAS_FPATHCONF /**/ |
420 | |
a0d0e21e |
421 | /* HAS_PAUSE: |
422 | * This symbol, if defined, indicates that the pause routine is |
423 | * available to suspend a process until a signal is received. |
a687059c |
424 | */ |
a0d0e21e |
425 | #$d_pause HAS_PAUSE /**/ |
a687059c |
426 | |
a0d0e21e |
427 | /* HAS_PIPE: |
428 | * This symbol, if defined, indicates that the pipe routine is |
429 | * available to create an inter-process channel. |
fe14fcc3 |
430 | */ |
a0d0e21e |
431 | #$d_pipe HAS_PIPE /**/ |
432 | |
8e07c86e |
433 | /* HAS_POLL: |
434 | * This symbol, if defined, indicates that the poll routine is |
dfe9444c |
435 | * available to poll active file descriptors. You may safely |
436 | * include <poll.h> when this symbol is defined. |
8e07c86e |
437 | */ |
438 | #$d_poll HAS_POLL /**/ |
439 | |
a0d0e21e |
440 | /* HAS_READDIR: |
441 | * This symbol, if defined, indicates that the readdir routine is |
442 | * available to read directory entries. You may have to include |
443 | * <dirent.h>. See I_DIRENT. |
444 | */ |
445 | #$d_readdir HAS_READDIR /**/ |
446 | |
447 | /* HAS_SEEKDIR: |
448 | * This symbol, if defined, indicates that the seekdir routine is |
449 | * available. You may have to include <dirent.h>. See I_DIRENT. |
450 | */ |
451 | #$d_seekdir HAS_SEEKDIR /**/ |
452 | |
453 | /* HAS_TELLDIR: |
454 | * This symbol, if defined, indicates that the telldir routine is |
455 | * available. You may have to include <dirent.h>. See I_DIRENT. |
456 | */ |
457 | #$d_telldir HAS_TELLDIR /**/ |
458 | |
459 | /* HAS_REWINDDIR: |
460 | * This symbol, if defined, indicates that the rewinddir routine is |
461 | * available. You may have to include <dirent.h>. See I_DIRENT. |
462 | */ |
463 | #$d_rewinddir HAS_REWINDDIR /**/ |
464 | |
465 | /* HAS_READLINK: |
466 | * This symbol, if defined, indicates that the readlink routine is |
467 | * available to read the value of a symbolic link. |
468 | */ |
469 | #$d_readlink HAS_READLINK /**/ |
fe14fcc3 |
470 | |
2304df62 |
471 | /* HAS_RENAME: |
378cc40b |
472 | * This symbol, if defined, indicates that the rename routine is available |
473 | * to rename files. Otherwise you should do the unlink(), link(), unlink() |
474 | * trick. |
475 | */ |
2304df62 |
476 | #$d_rename HAS_RENAME /**/ |
378cc40b |
477 | |
2304df62 |
478 | /* HAS_RMDIR: |
479 | * This symbol, if defined, indicates that the rmdir routine is |
480 | * available to remove directories. Otherwise you should fork off a |
481 | * new process to exec /bin/rmdir. |
9f971974 |
482 | */ |
2304df62 |
483 | #$d_rmdir HAS_RMDIR /**/ |
9f971974 |
484 | |
2304df62 |
485 | /* HAS_SELECT: |
486 | * This symbol, if defined, indicates that the select routine is |
487 | * available to select active file descriptors. If the timeout field |
488 | * is used, <sys/time.h> may need to be included. |
fe14fcc3 |
489 | */ |
2304df62 |
490 | #$d_select HAS_SELECT /**/ |
a687059c |
491 | |
2304df62 |
492 | /* HAS_SETEGID: |
378cc40b |
493 | * This symbol, if defined, indicates that the setegid routine is available |
494 | * to change the effective gid of the current program. |
495 | */ |
2304df62 |
496 | #$d_setegid HAS_SETEGID /**/ |
378cc40b |
497 | |
2304df62 |
498 | /* HAS_SETEUID: |
378cc40b |
499 | * This symbol, if defined, indicates that the seteuid routine is available |
500 | * to change the effective uid of the current program. |
501 | */ |
2304df62 |
502 | #$d_seteuid HAS_SETEUID /**/ |
503 | |
a0d0e21e |
504 | /* HAS_SETLINEBUF: |
505 | * This symbol, if defined, indicates that the setlinebuf routine is |
506 | * available to change stderr or stdout from block-buffered or unbuffered |
507 | * to a line-buffered mode. |
508 | */ |
509 | #$d_setlinebuf HAS_SETLINEBUF /**/ |
510 | |
511 | /* HAS_SETLOCALE: |
512 | * This symbol, if defined, indicates that the setlocale routine is |
513 | * available to handle locale-specific ctype implementations. |
514 | */ |
515 | #$d_setlocale HAS_SETLOCALE /**/ |
516 | |
dfe9444c |
517 | /* HAS_SETPGID: |
518 | * This symbol, if defined, indicates that the setpgid(pid, gpid) |
519 | * routine is available to set process group ID. |
520 | */ |
521 | #$d_setpgid HAS_SETPGID /**/ |
522 | |
523 | /* HAS_SETPGRP: |
524 | * This symbol, if defined, indicates that the setpgrp routine is |
525 | * available to set the current process group. |
526 | */ |
527 | /* USE_BSD_SETPGRP: |
528 | * This symbol, if defined, indicates that setpgrp needs two |
529 | * arguments whereas USG one needs none. See also HAS_SETPGID |
530 | * for a POSIX interface. |
531 | */ |
532 | #$d_setpgrp HAS_SETPGRP /**/ |
533 | #$d_bsdsetpgrp USE_BSD_SETPGRP /**/ |
534 | |
2304df62 |
535 | /* HAS_SETPGRP2: |
d8f2e4cc |
536 | * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) |
537 | * routine is available to set the current process group. |
538 | */ |
2304df62 |
539 | #$d_setpgrp2 HAS_SETPGRP2 /**/ |
d8f2e4cc |
540 | |
2304df62 |
541 | /* HAS_SETPRIORITY: |
542 | * This symbol, if defined, indicates that the setpriority routine is |
a687059c |
543 | * available to set a process's priority. |
544 | */ |
2304df62 |
545 | #$d_setprior HAS_SETPRIORITY /**/ |
a687059c |
546 | |
2304df62 |
547 | /* HAS_SETREGID: |
a687059c |
548 | * This symbol, if defined, indicates that the setregid routine is |
2304df62 |
549 | * available to change the real and effective gid of the current |
550 | * process. |
a687059c |
551 | */ |
2304df62 |
552 | /* HAS_SETRESGID: |
a687059c |
553 | * This symbol, if defined, indicates that the setresgid routine is |
554 | * available to change the real, effective and saved gid of the current |
2304df62 |
555 | * process. |
a687059c |
556 | */ |
2304df62 |
557 | #$d_setregid HAS_SETREGID /**/ |
558 | #$d_setresgid HAS_SETRESGID /**/ |
a687059c |
559 | |
2304df62 |
560 | /* HAS_SETREUID: |
a687059c |
561 | * This symbol, if defined, indicates that the setreuid routine is |
2304df62 |
562 | * available to change the real and effective uid of the current |
563 | * process. |
a687059c |
564 | */ |
2304df62 |
565 | /* HAS_SETRESUID: |
a687059c |
566 | * This symbol, if defined, indicates that the setresuid routine is |
567 | * available to change the real, effective and saved uid of the current |
2304df62 |
568 | * process. |
a687059c |
569 | */ |
2304df62 |
570 | #$d_setreuid HAS_SETREUID /**/ |
571 | #$d_setresuid HAS_SETRESUID /**/ |
a687059c |
572 | |
2304df62 |
573 | /* HAS_SETRGID: |
378cc40b |
574 | * This symbol, if defined, indicates that the setrgid routine is available |
575 | * to change the real gid of the current program. |
576 | */ |
2304df62 |
577 | #$d_setrgid HAS_SETRGID /**/ |
378cc40b |
578 | |
2304df62 |
579 | /* HAS_SETRUID: |
378cc40b |
580 | * This symbol, if defined, indicates that the setruid routine is available |
581 | * to change the real uid of the current program. |
582 | */ |
2304df62 |
583 | #$d_setruid HAS_SETRUID /**/ |
584 | |
585 | /* HAS_SETSID: |
586 | * This symbol, if defined, indicates that the setsid routine is |
587 | * available to set the process group ID. |
588 | */ |
589 | #$d_setsid HAS_SETSID /**/ |
fe14fcc3 |
590 | |
a0d0e21e |
591 | /* Shmat_t: |
592 | * This symbol holds the return type of the shmat() system call. |
593 | * Usually set to 'void *' or 'char *'. |
fe14fcc3 |
594 | */ |
a0d0e21e |
595 | /* HAS_SHMAT_PROTOTYPE: |
596 | * This symbol, if defined, indicates that the sys/shm.h includes |
597 | * a prototype for shmat(). Otherwise, it is up to the program to |
598 | * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess, |
599 | * but not always right so it should be emitted by the program only |
600 | * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. |
fe14fcc3 |
601 | */ |
a0d0e21e |
602 | #define Shmat_t $shmattype /**/ |
603 | #$d_shmatprototype HAS_SHMAT_PROTOTYPE /**/ |
fe14fcc3 |
604 | |
dfe9444c |
605 | /* HAS_STRCHR: |
606 | * This symbol is defined to indicate that the strchr()/strrchr() |
607 | * functions are available for string searching. If not, try the |
608 | * index()/rindex() pair. |
16d20bd9 |
609 | */ |
dfe9444c |
610 | /* HAS_INDEX: |
611 | * This symbol is defined to indicate that the index()/rindex() |
612 | * functions are available for string searching. |
c2960299 |
613 | */ |
dfe9444c |
614 | #$d_strchr HAS_STRCHR /**/ |
615 | #$d_index HAS_INDEX /**/ |
616 | |
617 | /* HAS_STRCOLL: |
618 | * This symbol, if defined, indicates that the strcoll routine is |
619 | * available to compare strings using collating information. |
16d20bd9 |
620 | */ |
dfe9444c |
621 | #$d_strcoll HAS_STRCOLL /**/ |
622 | |
623 | /* USE_STRUCT_COPY: |
624 | * This symbol, if defined, indicates that this C compiler knows how |
625 | * to copy structures. If undefined, you'll need to use a block copy |
626 | * routine of some sort instead. |
c2960299 |
627 | */ |
dfe9444c |
628 | #$d_strctcpy USE_STRUCT_COPY /**/ |
8d063cd8 |
629 | |
a89d8a78 |
630 | /* HAS_STRTOD: |
631 | * This symbol, if defined, indicates that the strtod routine is |
5f05dabc |
632 | * available to provide better numeric string conversion than atof(). |
a89d8a78 |
633 | */ |
634 | #$d_strtod HAS_STRTOD /**/ |
635 | |
636 | /* HAS_STRTOL: |
5f05dabc |
637 | * This symbol, if defined, indicates that the strtol routine is available |
638 | * to provide better numeric string conversion than atoi() and friends. |
a89d8a78 |
639 | */ |
640 | #$d_strtol HAS_STRTOL /**/ |
641 | |
642 | /* HAS_STRTOUL: |
643 | * This symbol, if defined, indicates that the strtoul routine is |
5f05dabc |
644 | * available to provide conversion of strings to unsigned long. |
a89d8a78 |
645 | */ |
646 | #$d_strtoul HAS_STRTOUL /**/ |
647 | |
a0d0e21e |
648 | /* HAS_STRXFRM: |
649 | * This symbol, if defined, indicates that the strxfrm() routine is |
650 | * available to transform strings. |
651 | */ |
652 | #$d_strxfrm HAS_STRXFRM /**/ |
653 | |
2304df62 |
654 | /* HAS_SYMLINK: |
2e1b3b7e |
655 | * This symbol, if defined, indicates that the symlink routine is available |
656 | * to create symbolic links. |
657 | */ |
2304df62 |
658 | #$d_symlink HAS_SYMLINK /**/ |
2e1b3b7e |
659 | |
2304df62 |
660 | /* HAS_SYSCALL: |
661 | * This symbol, if defined, indicates that the syscall routine is |
662 | * available to call arbitrary system calls. If undefined, that's tough. |
a687059c |
663 | */ |
2304df62 |
664 | #$d_syscall HAS_SYSCALL /**/ |
e5d73d77 |
665 | |
ecfc5424 |
666 | /* HAS_SYSCONF: |
667 | * This symbol, if defined, indicates that sysconf() is available |
668 | * to determine system related limits and options. |
669 | */ |
670 | #$d_sysconf HAS_SYSCONF /**/ |
671 | |
2304df62 |
672 | /* HAS_SYSTEM: |
673 | * This symbol, if defined, indicates that the system routine is |
674 | * available to issue a shell command. |
9f971974 |
675 | */ |
2304df62 |
676 | #$d_system HAS_SYSTEM /**/ |
9f971974 |
677 | |
a0d0e21e |
678 | /* HAS_TCGETPGRP: |
679 | * This symbol, if defined, indicates that the tcgetpgrp routine is |
680 | * available to get foreground process group ID. |
85e6fe83 |
681 | */ |
a0d0e21e |
682 | #$d_tcgetpgrp HAS_TCGETPGRP /**/ |
683 | |
684 | /* HAS_TCSETPGRP: |
685 | * This symbol, if defined, indicates that the tcsetpgrp routine is |
686 | * available to set foreground process group ID. |
687 | */ |
688 | #$d_tcsetpgrp HAS_TCSETPGRP /**/ |
85e6fe83 |
689 | |
2304df62 |
690 | /* HAS_TRUNCATE: |
87250799 |
691 | * This symbol, if defined, indicates that the truncate routine is |
692 | * available to truncate files. |
693 | */ |
2304df62 |
694 | #$d_truncate HAS_TRUNCATE /**/ |
87250799 |
695 | |
a0d0e21e |
696 | /* HAS_TZNAME: |
697 | * This symbol, if defined, indicates that the tzname[] array is |
698 | * available to access timezone names. |
699 | */ |
700 | #$d_tzname HAS_TZNAME /**/ |
701 | |
702 | /* HAS_UMASK: |
703 | * This symbol, if defined, indicates that the umask routine is |
704 | * available to set and get the value of the file creation mask. |
705 | */ |
706 | #$d_umask HAS_UMASK /**/ |
707 | |
2304df62 |
708 | /* HASVOLATILE: |
afd9f252 |
709 | * This symbol, if defined, indicates that this C compiler knows about |
710 | * the volatile declaration. |
711 | */ |
712 | #$d_volatile HASVOLATILE /**/ |
2304df62 |
713 | #ifndef HASVOLATILE |
714 | #define volatile |
715 | #endif |
afd9f252 |
716 | |
2304df62 |
717 | /* HAS_WAIT4: |
bf38876a |
718 | * This symbol, if defined, indicates that wait4() exists. |
719 | */ |
2304df62 |
720 | #$d_wait4 HAS_WAIT4 /**/ |
bf38876a |
721 | |
2304df62 |
722 | /* HAS_WAITPID: |
723 | * This symbol, if defined, indicates that the waitpid routine is |
724 | * available to wait for child process. |
39c3038c |
725 | */ |
2304df62 |
726 | #$d_waitpid HAS_WAITPID /**/ |
39c3038c |
727 | |
a0d0e21e |
728 | /* HAS_WCSTOMBS: |
729 | * This symbol, if defined, indicates that the wcstombs routine is |
730 | * available to convert wide character strings to multibyte strings. |
731 | */ |
732 | #$d_wcstombs HAS_WCSTOMBS /**/ |
733 | |
734 | /* HAS_WCTOMB: |
735 | * This symbol, if defined, indicates that the wctomb routine is available |
736 | * to covert a wide character to a multibyte. |
737 | */ |
738 | #$d_wctomb HAS_WCTOMB /**/ |
739 | |
28e8609d |
740 | /* I_ARPA_INET: |
5ff3f7a4 |
741 | * This symbol, if defined, indicates to the C program that it should |
742 | * include <arpa/inet.h> to get inet_addr and friends declarations. |
28e8609d |
743 | */ |
5ff3f7a4 |
744 | #$i_arpainet I_ARPA_INET /**/ |
28e8609d |
745 | |
dfe9444c |
746 | /* I_DBM: |
747 | * This symbol, if defined, indicates that <dbm.h> exists and should |
748 | * be included. |
232e078e |
749 | */ |
dfe9444c |
750 | /* I_RPCSVC_DBM: |
751 | * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and |
752 | * should be included. |
232e078e |
753 | */ |
dfe9444c |
754 | #$i_dbm I_DBM /**/ |
755 | #$i_rpcsvcdbm I_RPCSVC_DBM /**/ |
232e078e |
756 | |
2304df62 |
757 | /* I_DIRENT: |
758 | * This symbol, if defined, indicates to the C program that it should |
759 | * include <dirent.h>. Using this symbol also triggers the definition |
760 | * of the Direntry_t define which ends up being 'struct dirent' or |
761 | * 'struct direct' depending on the availability of <dirent.h>. |
1c3d792e |
762 | */ |
2304df62 |
763 | /* DIRNAMLEN: |
764 | * This symbol, if defined, indicates to the C program that the length |
765 | * of directory entry names is provided by a d_namlen field. Otherwise |
766 | * you need to do strlen() on the d_name field. |
767 | */ |
a0d0e21e |
768 | /* Direntry_t: |
769 | * This symbol is set to 'struct direct' or 'struct dirent' depending on |
770 | * whether dirent is available or not. You should use this pseudo type to |
771 | * portably declare your directory entries. |
772 | */ |
2304df62 |
773 | #$i_dirent I_DIRENT /**/ |
774 | #$d_dirnamlen DIRNAMLEN /**/ |
a0d0e21e |
775 | #define Direntry_t $direntrytype |
776 | |
777 | /* I_DLFCN: |
778 | * This symbol, if defined, indicates that <dlfcn.h> exists and should |
779 | * be included. |
780 | */ |
781 | #$i_dlfcn I_DLFCN /**/ |
1c3d792e |
782 | |
2304df62 |
783 | /* I_FCNTL: |
fe14fcc3 |
784 | * This manifest constant tells the C program to include <fcntl.h>. |
a687059c |
785 | */ |
2304df62 |
786 | #$i_fcntl I_FCNTL /**/ |
a687059c |
787 | |
a0d0e21e |
788 | /* I_FLOAT: |
789 | * This symbol, if defined, indicates to the C program that it should |
790 | * include <float.h> to get definition of symbols like DBL_MAX or |
791 | * DBL_MIN, i.e. machine dependent floating point values. |
a687059c |
792 | */ |
a0d0e21e |
793 | #$i_float I_FLOAT /**/ |
a687059c |
794 | |
a0d0e21e |
795 | /* I_LIMITS: |
796 | * This symbol, if defined, indicates to the C program that it should |
797 | * include <limits.h> to get definition of symbols like WORD_BIT or |
798 | * LONG_MAX, i.e. machine dependant limitations. |
799 | */ |
800 | #$i_limits I_LIMITS /**/ |
801 | |
dfe9444c |
802 | /* I_LOCALE: |
803 | * This symbol, if defined, indicates to the C program that it should |
804 | * include <locale.h>. |
805 | */ |
806 | #$i_locale I_LOCALE /**/ |
807 | |
a0d0e21e |
808 | /* I_MATH: |
809 | * This symbol, if defined, indicates to the C program that it should |
810 | * include <math.h>. |
811 | */ |
812 | #$i_math I_MATH /**/ |
813 | |
814 | /* I_MEMORY: |
815 | * This symbol, if defined, indicates to the C program that it should |
816 | * include <memory.h>. |
817 | */ |
818 | #$i_memory I_MEMORY /**/ |
819 | |
232e078e |
820 | /* I_NDBM: |
16d20bd9 |
821 | * This symbol, if defined, indicates that <ndbm.h> exists and should |
232e078e |
822 | * be included. |
823 | */ |
824 | #$i_ndbm I_NDBM /**/ |
825 | |
ecfc5424 |
826 | /* I_NET_ERRNO: |
827 | * This symbol, if defined, indicates that <net/errno.h> exists and |
828 | * should be included. |
2304df62 |
829 | */ |
ecfc5424 |
830 | #$i_neterrno I_NET_ERRNO /**/ |
2304df62 |
831 | |
832 | /* I_NETINET_IN: |
03a14243 |
833 | * This symbol, if defined, indicates to the C program that it should |
2304df62 |
834 | * include <netinet/in.h>. Otherwise, you may try <sys/in.h>. |
03a14243 |
835 | */ |
2304df62 |
836 | #$i_niin I_NETINET_IN /**/ |
03a14243 |
837 | |
dfe9444c |
838 | /* I_SFIO: |
839 | * This symbol, if defined, indicates to the C program that it should |
840 | * include <sfio.h>. |
841 | */ |
842 | #$i_sfio I_SFIO /**/ |
843 | |
2304df62 |
844 | /* I_STDDEF: |
845 | * This symbol, if defined, indicates that <stddef.h> exists and should |
a687059c |
846 | * be included. |
847 | */ |
2304df62 |
848 | #$i_stddef I_STDDEF /**/ |
a687059c |
849 | |
a0d0e21e |
850 | /* I_STDLIB: |
851 | * This symbol, if defined, indicates that <stdlib.h> exists and should |
852 | * be included. |
853 | */ |
854 | #$i_stdlib I_STDLIB /**/ |
855 | |
856 | /* I_STRING: |
85e6fe83 |
857 | * This symbol, if defined, indicates to the C program that it should |
858 | * include <string.h> (USG systems) instead of <strings.h> (BSD systems). |
859 | */ |
860 | #$i_string I_STRING /**/ |
861 | |
2304df62 |
862 | /* I_SYS_DIR: |
863 | * This symbol, if defined, indicates to the C program that it should |
864 | * include <sys/dir.h>. |
d8f2e4cc |
865 | */ |
2304df62 |
866 | #$i_sysdir I_SYS_DIR /**/ |
867 | |
868 | /* I_SYS_FILE: |
869 | * This symbol, if defined, indicates to the C program that it should |
870 | * include <sys/file.h> to get definition of R_OK and friends. |
d8f2e4cc |
871 | */ |
2304df62 |
872 | #$i_sysfile I_SYS_FILE /**/ |
873 | |
874 | /* I_SYS_IOCTL: |
875 | * This symbol, if defined, indicates that <sys/ioctl.h> exists and should |
876 | * be included. Otherwise, include <sgtty.h> or <termio.h>. |
d8f2e4cc |
877 | */ |
2304df62 |
878 | #$i_sysioctl I_SYS_IOCTL /**/ |
879 | |
880 | /* I_SYS_NDIR: |
881 | * This symbol, if defined, indicates to the C program that it should |
882 | * include <sys/ndir.h>. |
883 | */ |
884 | #$i_sysndir I_SYS_NDIR /**/ |
885 | |
a0d0e21e |
886 | /* I_SYS_PARAM: |
887 | * This symbol, if defined, indicates to the C program that it should |
888 | * include <sys/param.h>. |
889 | */ |
890 | #$i_sysparam I_SYS_PARAM /**/ |
891 | |
e876cf0b |
892 | /* I_SYS_RESOURCE: |
893 | * This symbol, if defined, indicates to the C program that it should |
894 | * include <sys/resource.h>. |
895 | */ |
896 | #$i_sysresrc I_SYS_RESOURCE /**/ |
897 | |
2304df62 |
898 | /* I_SYS_SELECT: |
899 | * This symbol, if defined, indicates to the C program that it should |
900 | * include <sys/select.h> in order to get definition of struct timeval. |
901 | */ |
902 | #$i_sysselct I_SYS_SELECT /**/ |
903 | |
dfe9444c |
904 | /* I_SYS_STAT: |
905 | * This symbol, if defined, indicates to the C program that it should |
906 | * include <sys/stat.h>. |
907 | */ |
908 | #$i_sysstat I_SYS_STAT /**/ |
909 | |
a0d0e21e |
910 | /* I_SYS_TIMES: |
911 | * This symbol, if defined, indicates to the C program that it should |
912 | * include <sys/times.h>. |
913 | */ |
914 | #$i_systimes I_SYS_TIMES /**/ |
915 | |
bd89102f |
916 | /* I_SYS_TYPES: |
917 | * This symbol, if defined, indicates to the C program that it should |
918 | * include <sys/types.h>. |
919 | */ |
920 | #$i_systypes I_SYS_TYPES /**/ |
921 | |
25f94b33 |
922 | /* I_SYS_UN: |
923 | * This symbol, if defined, indicates to the C program that it should |
924 | * include <sys/un.h> to get UNIX domain socket definitions. |
925 | */ |
926 | #$i_sysun I_SYS_UN /**/ |
927 | |
e876cf0b |
928 | /* I_SYS_WAIT: |
929 | * This symbol, if defined, indicates to the C program that it should |
930 | * include <sys/wait.h>. |
931 | */ |
932 | #$i_syswait I_SYS_WAIT /**/ |
933 | |
a0d0e21e |
934 | /* I_TERMIO: |
935 | * This symbol, if defined, indicates that the program should include |
936 | * <termio.h> rather than <sgtty.h>. There are also differences in |
937 | * the ioctl() calls that depend on the value of this symbol. |
938 | */ |
939 | /* I_TERMIOS: |
940 | * This symbol, if defined, indicates that the program should include |
941 | * the POSIX termios.h rather than sgtty.h or termio.h. |
942 | * There are also differences in the ioctl() calls that depend on the |
943 | * value of this symbol. |
944 | */ |
945 | /* I_SGTTY: |
946 | * This symbol, if defined, indicates that the program should include |
947 | * <sgtty.h> rather than <termio.h>. There are also differences in |
948 | * the ioctl() calls that depend on the value of this symbol. |
949 | */ |
950 | #$i_termio I_TERMIO /**/ |
951 | #$i_termios I_TERMIOS /**/ |
952 | #$i_sgtty I_SGTTY /**/ |
953 | |
85e6fe83 |
954 | /* I_UNISTD: |
955 | * This symbol, if defined, indicates to the C program that it should |
956 | * include <unistd.h>. |
957 | */ |
958 | #$i_unistd I_UNISTD /**/ |
d8f2e4cc |
959 | |
2304df62 |
960 | /* I_UTIME: |
d8f2e4cc |
961 | * This symbol, if defined, indicates to the C program that it should |
2304df62 |
962 | * include <utime.h>. |
d8f2e4cc |
963 | */ |
2304df62 |
964 | #$i_utime I_UTIME /**/ |
d8f2e4cc |
965 | |
dfe9444c |
966 | /* I_VALUES: |
967 | * This symbol, if defined, indicates to the C program that it should |
968 | * include <values.h> to get definition of symbols like MINFLOAT or |
969 | * MAXLONG, i.e. machine dependant limitations. Probably, you |
970 | * should use <limits.h> instead, if it is available. |
971 | */ |
972 | #$i_values I_VALUES /**/ |
973 | |
e876cf0b |
974 | /* I_STDARG: |
975 | * This symbol, if defined, indicates that <stdarg.h> exists and should |
976 | * be included. |
977 | */ |
978 | /* I_VARARGS: |
979 | * This symbol, if defined, indicates to the C program that it should |
980 | * include <varargs.h>. |
981 | */ |
982 | #$i_stdarg I_STDARG /**/ |
983 | #$i_varargs I_VARARGS /**/ |
984 | |
a0d0e21e |
985 | /* I_VFORK: |
986 | * This symbol, if defined, indicates to the C program that it should |
987 | * include vfork.h. |
988 | */ |
989 | #$i_vfork I_VFORK /**/ |
a687059c |
990 | |
a0d0e21e |
991 | /* CAN_PROTOTYPE: |
992 | * If defined, this macro indicates that the C compiler can handle |
993 | * function prototypes. |
85e6fe83 |
994 | */ |
a0d0e21e |
995 | /* _: |
996 | * This macro is used to declare function parameters for folks who want |
997 | * to make declarations with prototypes using a different style than |
998 | * the above macros. Use double parentheses. For example: |
999 | * |
1000 | * int main _((int argc, char *argv[])); |
1001 | */ |
1002 | #$prototype CAN_PROTOTYPE /**/ |
1003 | #ifdef CAN_PROTOTYPE |
1004 | #define _(args) args |
1005 | #else |
1006 | #define _(args) () |
1007 | #endif |
85e6fe83 |
1008 | |
dfe9444c |
1009 | /* SH_PATH: |
1010 | * This symbol contains the full pathname to the shell used on this |
1011 | * on this system to execute Bourne shell scripts. Usually, this will be |
1012 | * /bin/sh, though it's possible that some systems will have /bin/ksh, |
1013 | * /bin/pdksh, /bin/ash, /bin/bash, or even something such as |
1014 | * D:/bin/sh.exe. |
a0d0e21e |
1015 | */ |
dfe9444c |
1016 | #define SH_PATH "$sh" /**/ |
a0d0e21e |
1017 | |
2304df62 |
1018 | /* STDCHAR: |
1019 | * This symbol is defined to be the type of char used in stdio.h. |
1020 | * It has the values "unsigned char" or "char". |
fe14fcc3 |
1021 | */ |
2304df62 |
1022 | #define STDCHAR $stdchar /**/ |
1023 | |
5ff3f7a4 |
1024 | /* HAS_ACCESSX: |
1025 | * This symbol, if defined, indicates that the accessx routine is |
1026 | * available to do extended access checks. |
1027 | */ |
1028 | #$d_accessx HAS_ACCESSX /**/ |
1029 | |
1030 | /* HAS_EACCESS: |
1031 | * This symbol, if defined, indicates that the eaccess routine is |
1032 | * available to do extended access checks. |
1033 | */ |
1034 | #$d_eaccess HAS_EACCESS /**/ |
1035 | |
1036 | /* I_SYS_ACCESS: |
1037 | * This symbol, if defined, indicates to the C program that it should |
85ab1d1d |
1038 | * include <sys/access.h>. |
5ff3f7a4 |
1039 | */ |
1040 | #$i_sysaccess I_SYS_ACCESS /**/ |
1041 | |
1042 | /* I_SYS_SECURITY: |
1043 | * This symbol, if defined, indicates to the C program that it should |
1044 | * include <sys/security.h>. |
1045 | */ |
1046 | #$i_syssecrt I_SYS_SECURITY /**/ |
1047 | |
a12fb911 |
1048 | /* CROSSCOMPILE: |
1049 | * This symbol, if defined, signifies that we our |
1050 | * build process is a cross-compilation. |
1051 | */ |
1052 | #$crosscompile CROSSCOMPILE /**/ |
1053 | |
8f1f23e8 |
1054 | /* INTSIZE: |
1055 | * This symbol contains the value of sizeof(int) so that the C |
1056 | * preprocessor can make decisions based on it. |
1057 | */ |
1058 | /* LONGSIZE: |
1059 | * This symbol contains the value of sizeof(long) so that the C |
1060 | * preprocessor can make decisions based on it. |
1061 | */ |
1062 | /* SHORTSIZE: |
1063 | * This symbol contains the value of sizeof(short) so that the C |
1064 | * preprocessor can make decisions based on it. |
1065 | */ |
1066 | #define INTSIZE $intsize /**/ |
1067 | #define LONGSIZE $longsize /**/ |
1068 | #define SHORTSIZE $shortsize /**/ |
1069 | |
a12fb911 |
1070 | /* MULTIARCH: |
1071 | * This symbol, if defined, signifies that the build |
1072 | * process will produce some binary files that are going to be |
1073 | * used in a cross-platform environment. This is the case for |
1074 | * example with the NeXT "fat" binaries that contain executables |
1075 | * for several CPUs. |
1076 | */ |
1077 | #$multiarch MULTIARCH /**/ |
1078 | |
dfe9444c |
1079 | /* MEM_ALIGNBYTES: |
68c15b6f |
1080 | * This symbol contains the number of bytes required to align a |
1081 | * double. Usual values are 2, 4 and 8. The default is eight, |
1082 | * for safety. |
5f05dabc |
1083 | */ |
c4747d3e |
1084 | #if defined(CROSSCOMPILE) || defined(MULTIARCH) |
68c15b6f |
1085 | # define MEM_ALIGNBYTES 8 |
1086 | #else |
1087 | #define MEM_ALIGNBYTES $alignbytes |
1088 | #endif |
5f05dabc |
1089 | |
8e07c86e |
1090 | /* BYTEORDER: |
e876cf0b |
1091 | * This symbol holds the hexadecimal constant defined in byteorder, |
8e07c86e |
1092 | * i.e. 0x1234 or 0x4321, etc... |
68c15b6f |
1093 | * If the compiler supports cross-compiling or multiple-architecture |
1094 | * binaries (eg. on NeXT systems), use compiler-defined macros to |
1095 | * determine the byte order. |
7bac28a0 |
1096 | * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture |
e876cf0b |
1097 | * Binaries (MAB) on either big endian or little endian machines. |
1098 | * The endian-ness is available at compile-time. This only matters |
1099 | * for perl, where the config.h can be generated and installed on |
1100 | * one system, and used by a different architecture to build an |
1101 | * extension. Older versions of NeXT that might not have |
1102 | * defined either *_ENDIAN__ were all on Motorola 680x0 series, |
1103 | * so the default case (for NeXT) is big endian to catch them. |
1104 | * This might matter for NeXT 3.0. |
8e07c86e |
1105 | */ |
c4747d3e |
1106 | #if defined(CROSSCOMPILE) || defined(MULTIARCH) |
68c15b6f |
1107 | # ifdef __LITTLE_ENDIAN__ |
1108 | # if LONGSIZE == 4 |
1109 | # define BYTEORDER 0x1234 |
1110 | # else |
1111 | # if LONGSIZE == 8 |
1112 | # define BYTEORDER 0x12345678 |
1113 | # endif |
1114 | # endif |
1115 | # else |
1116 | # ifdef __BIG_ENDIAN__ |
1117 | # if LONGSIZE == 4 |
1118 | # define BYTEORDER 0x4321 |
1119 | # else |
1120 | # if LONGSIZE == 8 |
1121 | # define BYTEORDER 0x87654321 |
1122 | # endif |
1123 | # endif |
1124 | # endif |
1125 | # endif |
1126 | # if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__)) |
1127 | # define BYTEORDER 0x4321 |
1128 | # endif |
1129 | #else |
8e07c86e |
1130 | #define BYTEORDER 0x$byteorder /* large digits for MSB */ |
760ac839 |
1131 | #endif /* NeXT */ |
8e07c86e |
1132 | |
dfe9444c |
1133 | /* CASTI32: |
1134 | * This symbol is defined if the C compiler can cast negative |
1135 | * or large floating point numbers to 32-bit ints. |
1aef975c |
1136 | */ |
dfe9444c |
1137 | #$d_casti32 CASTI32 /**/ |
85e6fe83 |
1138 | |
dfe9444c |
1139 | /* CASTNEGFLOAT: |
1140 | * This symbol is defined if the C compiler can cast negative |
1141 | * numbers to unsigned longs, ints and shorts. |
85e6fe83 |
1142 | */ |
dfe9444c |
1143 | /* CASTFLAGS: |
1144 | * This symbol contains flags that say what difficulties the compiler |
1145 | * has casting odd floating values to unsigned long: |
1146 | * 0 = ok |
1147 | * 1 = couldn't cast < 0 |
1148 | * 2 = couldn't cast >= 0x80000000 |
1149 | * 4 = couldn't cast in argument expression list |
bccf77a5 |
1150 | */ |
dfe9444c |
1151 | #$d_castneg CASTNEGFLOAT /**/ |
1152 | #define CASTFLAGS $castflags /**/ |
1153 | |
1154 | /* VOID_CLOSEDIR: |
1155 | * This symbol, if defined, indicates that the closedir() routine |
1156 | * does not return a value. |
bccf77a5 |
1157 | */ |
dfe9444c |
1158 | #$d_void_closedir VOID_CLOSEDIR /**/ |
bccf77a5 |
1159 | |
921b2963 |
1160 | /* HAS_FD_SET: |
1161 | * This symbol, when defined, indicates presence of the fd_set typedef |
1162 | * in <sys/types.h> |
1163 | */ |
1164 | #$d_fd_set HAS_FD_SET /**/ |
1165 | |
8e07c86e |
1166 | /* Gconvert: |
1167 | * This preprocessor macro is defined to convert a floating point |
1168 | * number to a string without a trailing decimal point. This |
1169 | * emulates the behavior of sprintf("%g"), but is sometimes much more |
1170 | * efficient. If gconvert() is not available, but gcvt() drops the |
1171 | * trailing decimal point, then gcvt() is used. If all else fails, |
1172 | * a macro using sprintf("%g") is used. Arguments for the Gconvert |
1173 | * macro are: value, number of digits, whether trailing zeros should |
1174 | * be retained, and the output buffer. |
1175 | * Possible values are: |
1176 | * d_Gconvert='gconvert((x),(n),(t),(b))' |
1177 | * d_Gconvert='gcvt((x),(n),(b))' |
1178 | * d_Gconvert='sprintf((b),"%.*g",(n),(x))' |
1179 | * The last two assume trailing zeros should not be kept. |
1180 | */ |
1181 | #define Gconvert(x,n,t,b) $d_Gconvert |
1182 | |
dfe9444c |
1183 | /* HAS_GNULIBC: |
c1b76f5d |
1184 | * This symbol, if defined, indicates to the C program that |
dfe9444c |
1185 | * the GNU C library is being used. |
c1b76f5d |
1186 | */ |
dfe9444c |
1187 | #$d_gnulibc HAS_GNULIBC /**/ |
1188 | /* HAS_ISASCII: |
1189 | * This manifest constant lets the C program know that isascii |
1190 | * is available. |
c1b76f5d |
1191 | */ |
dfe9444c |
1192 | #$d_isascii HAS_ISASCII /**/ |
c1b76f5d |
1193 | |
dd64f1c3 |
1194 | /* HAS_LCHOWN: |
1195 | * This symbol, if defined, indicates that the lchown routine is |
1196 | * available to operate on a symbolic link (instead of following the |
1197 | * link). |
1198 | */ |
1199 | #$d_lchown HAS_LCHOWN /**/ |
1200 | |
dfe9444c |
1201 | /* HAS_OPEN3: |
1202 | * This manifest constant lets the C program know that the three |
1203 | * argument form of open(2) is available. |
774d564b |
1204 | */ |
dfe9444c |
1205 | #$d_open3 HAS_OPEN3 /**/ |
774d564b |
1206 | |
dfe9444c |
1207 | /* HAS_SAFE_BCOPY: |
1208 | * This symbol, if defined, indicates that the bcopy routine is available |
1209 | * to copy potentially overlapping memory blocks. Otherwise you should |
1210 | * probably use memmove() or memcpy(). If neither is defined, roll your |
1211 | * own version. |
c1b76f5d |
1212 | */ |
dfe9444c |
1213 | #$d_safebcpy HAS_SAFE_BCOPY /**/ |
c1b76f5d |
1214 | |
dfe9444c |
1215 | /* HAS_SAFE_MEMCPY: |
1216 | * This symbol, if defined, indicates that the memcpy routine is available |
1217 | * to copy potentially overlapping memory blocks. Otherwise you should |
1218 | * probably use memmove() or memcpy(). If neither is defined, roll your |
1219 | * own version. |
c1b76f5d |
1220 | */ |
dfe9444c |
1221 | #$d_safemcpy HAS_SAFE_MEMCPY /**/ |
c1b76f5d |
1222 | |
dfe9444c |
1223 | /* HAS_SANE_MEMCMP: |
1224 | * This symbol, if defined, indicates that the memcmp routine is available |
1225 | * and can be used to compare relative magnitudes of chars with their high |
1226 | * bits set. If it is not defined, roll your own version. |
760ac839 |
1227 | */ |
dfe9444c |
1228 | #$d_sanemcmp HAS_SANE_MEMCMP /**/ |
760ac839 |
1229 | |
dfe9444c |
1230 | /* HAS_SIGACTION: |
1231 | * This symbol, if defined, indicates that Vr4's sigaction() routine |
1232 | * is available. |
52e1cb5e |
1233 | */ |
dfe9444c |
1234 | #$d_sigaction HAS_SIGACTION /**/ |
52e1cb5e |
1235 | |
921b2963 |
1236 | /* HAS_SIGSETJMP: |
1237 | * This variable indicates to the C program that the sigsetjmp() |
1238 | * routine is available to save the calling process's registers |
1239 | * and stack environment for later use by siglongjmp(), and |
1240 | * to optionally save the process's signal mask. See |
1241 | * Sigjmp_buf, Sigsetjmp, and Siglongjmp. |
1242 | */ |
a5f75d66 |
1243 | /* Sigjmp_buf: |
760ac839 |
1244 | * This is the buffer type to be used with Sigsetjmp and Siglongjmp. |
a5f75d66 |
1245 | */ |
1246 | /* Sigsetjmp: |
760ac839 |
1247 | * This macro is used in the same way as sigsetjmp(), but will invoke |
1248 | * traditional setjmp() if sigsetjmp isn't available. |
1249 | * See HAS_SIGSETJMP. |
a5f75d66 |
1250 | */ |
1251 | /* Siglongjmp: |
760ac839 |
1252 | * This macro is used in the same way as siglongjmp(), but will invoke |
1253 | * traditional longjmp() if siglongjmp isn't available. |
1254 | * See HAS_SIGSETJMP. |
a5f75d66 |
1255 | */ |
1256 | #$d_sigsetjmp HAS_SIGSETJMP /**/ |
1257 | #ifdef HAS_SIGSETJMP |
1258 | #define Sigjmp_buf sigjmp_buf |
760ac839 |
1259 | #define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) |
1260 | #define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) |
a5f75d66 |
1261 | #else |
1262 | #define Sigjmp_buf jmp_buf |
760ac839 |
1263 | #define Sigsetjmp(buf,save_mask) setjmp((buf)) |
1264 | #define Siglongjmp(buf,retval) longjmp((buf),(retval)) |
a5f75d66 |
1265 | #endif |
1266 | |
dfe9444c |
1267 | /* USE_STDIO_PTR: |
1268 | * This symbol is defined if the _ptr and _cnt fields (or similar) |
1269 | * of the stdio FILE structure can be used to access the stdio buffer |
1270 | * for a file handle. If this is defined, then the FILE_ptr(fp) |
1271 | * and FILE_cnt(fp) macros will also be defined and should be used |
1272 | * to access these fields. |
a687059c |
1273 | */ |
dfe9444c |
1274 | /* FILE_ptr: |
1275 | * This macro is used to access the _ptr field (or equivalent) of the |
1276 | * FILE structure pointed to by its argument. This macro will always be |
1277 | * defined if USE_STDIO_PTR is defined. |
1278 | */ |
1279 | /* STDIO_PTR_LVALUE: |
1280 | * This symbol is defined if the FILE_ptr macro can be used as an |
1281 | * lvalue. |
1282 | */ |
1283 | /* FILE_cnt: |
1284 | * This macro is used to access the _cnt field (or equivalent) of the |
1285 | * FILE structure pointed to by its argument. This macro will always be |
1286 | * defined if USE_STDIO_PTR is defined. |
1287 | */ |
1288 | /* STDIO_CNT_LVALUE: |
1289 | * This symbol is defined if the FILE_cnt macro can be used as an |
1290 | * lvalue. |
1291 | */ |
1292 | #$d_stdstdio USE_STDIO_PTR /**/ |
1293 | #ifdef USE_STDIO_PTR |
1294 | #define FILE_ptr(fp) $stdio_ptr |
1295 | #$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/ |
1296 | #define FILE_cnt(fp) $stdio_cnt |
1297 | #$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/ |
1298 | #endif |
a687059c |
1299 | |
dfe9444c |
1300 | /* USE_STDIO_BASE: |
1301 | * This symbol is defined if the _base field (or similar) of the |
1302 | * stdio FILE structure can be used to access the stdio buffer for |
1303 | * a file handle. If this is defined, then the FILE_base(fp) macro |
1304 | * will also be defined and should be used to access this field. |
1305 | * Also, the FILE_bufsiz(fp) macro will be defined and should be used |
1306 | * to determine the number of bytes in the buffer. USE_STDIO_BASE |
1307 | * will never be defined unless USE_STDIO_PTR is. |
8e07c86e |
1308 | */ |
dfe9444c |
1309 | /* FILE_base: |
1310 | * This macro is used to access the _base field (or equivalent) of the |
1311 | * FILE structure pointed to by its argument. This macro will always be |
1312 | * defined if USE_STDIO_BASE is defined. |
8e07c86e |
1313 | */ |
dfe9444c |
1314 | /* FILE_bufsiz: |
1315 | * This macro is used to determine the number of bytes in the I/O |
1316 | * buffer pointed to by _base field (or equivalent) of the FILE |
1317 | * structure pointed to its argument. This macro will always be defined |
1318 | * if USE_STDIO_BASE is defined. |
1319 | */ |
1320 | #$d_stdiobase USE_STDIO_BASE /**/ |
1321 | #ifdef USE_STDIO_BASE |
1322 | #define FILE_base(fp) $stdio_base |
1323 | #define FILE_bufsiz(fp) $stdio_bufsiz |
1324 | #endif |
8e07c86e |
1325 | |
dfe9444c |
1326 | /* HAS_VPRINTF: |
1327 | * This symbol, if defined, indicates that the vprintf routine is available |
1328 | * to printf with a pointer to an argument list. If unavailable, you |
1329 | * may need to write your own, probably in terms of _doprnt(). |
4633a7c4 |
1330 | */ |
dfe9444c |
1331 | /* USE_CHAR_VSPRINTF: |
1332 | * This symbol is defined if this system has vsprintf() returning type |
1333 | * (char*). The trend seems to be to declare it as "int vsprintf()". It |
1334 | * is up to the package author to declare vsprintf correctly based on the |
1335 | * symbol. |
1336 | */ |
1337 | #$d_vprintf HAS_VPRINTF /**/ |
1338 | #$d_charvspr USE_CHAR_VSPRINTF /**/ |
4633a7c4 |
1339 | |
693762b4 |
1340 | /* DOUBLESIZE: |
1341 | * This symbol contains the size of a double, so that the C preprocessor |
1342 | * can make decisions based on it. |
1343 | */ |
1344 | #define DOUBLESIZE $doublesize /**/ |
1345 | |
dfe9444c |
1346 | /* I_TIME: |
760ac839 |
1347 | * This symbol, if defined, indicates to the C program that it should |
dfe9444c |
1348 | * include <time.h>. |
760ac839 |
1349 | */ |
dfe9444c |
1350 | /* I_SYS_TIME: |
1aef975c |
1351 | * This symbol, if defined, indicates to the C program that it should |
dfe9444c |
1352 | * include <sys/time.h>. |
1aef975c |
1353 | */ |
dfe9444c |
1354 | /* I_SYS_TIME_KERNEL: |
bccf77a5 |
1355 | * This symbol, if defined, indicates to the C program that it should |
dfe9444c |
1356 | * include <sys/time.h> with KERNEL defined. |
bccf77a5 |
1357 | */ |
dfe9444c |
1358 | #$i_time I_TIME /**/ |
1359 | #$i_systime I_SYS_TIME /**/ |
1360 | #$i_systimek I_SYS_TIME_KERNEL /**/ |
8e07c86e |
1361 | |
dfe9444c |
1362 | /* VAL_O_NONBLOCK: |
1363 | * This symbol is to be used during open() or fcntl(F_SETFL) to turn on |
1364 | * non-blocking I/O for the file descriptor. Note that there is no way |
1365 | * back, i.e. you cannot turn it blocking again this way. If you wish to |
1366 | * alternatively switch between blocking and non-blocking, use the |
1367 | * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. |
85e6fe83 |
1368 | */ |
dfe9444c |
1369 | /* VAL_EAGAIN: |
1370 | * This symbol holds the errno error code set by read() when no data was |
1371 | * present on the non-blocking file descriptor. |
1372 | */ |
1373 | /* RD_NODATA: |
1374 | * This symbol holds the return code from read() when no data is present |
1375 | * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is |
1376 | * not defined, then you can't distinguish between no data and EOF by |
1377 | * issuing a read(). You'll have to find another way to tell for sure! |
1378 | */ |
1379 | /* EOF_NONBLOCK: |
1380 | * This symbol, if defined, indicates to the C program that a read() on |
1381 | * a non-blocking file descriptor will return 0 on EOF, and not the value |
1382 | * held in RD_NODATA (-1 usually, in that case!). |
1383 | */ |
1384 | #define VAL_O_NONBLOCK $o_nonblock |
1385 | #define VAL_EAGAIN $eagain |
1386 | #define RD_NODATA $rd_nodata |
1387 | #$d_eofnblk EOF_NONBLOCK |
85e6fe83 |
1388 | |
693762b4 |
1389 | /* PTRSIZE: |
1390 | * This symbol contains the size of a pointer, so that the C preprocessor |
1391 | * can make decisions based on it. It will be sizeof(void *) if |
1392 | * the compiler supports (void *); otherwise it will be |
1393 | * sizeof(char *). |
1394 | */ |
1395 | #define PTRSIZE $ptrsize /**/ |
1396 | |
85ab1d1d |
1397 | /* Drand01: |
1398 | * This macro is to be used to generate uniformly distributed |
1399 | * random numbers over the range [0., 1.[. You may have to supply |
1400 | * an 'extern double drand48();' in your program since SunOS 4.1.3 |
1401 | * doesn't provide you with anything relevant in it's headers. |
1402 | * See HAS_DRAND48_PROTO. |
1403 | */ |
1404 | /* Rand_seed_t: |
1405 | * This symbol defines the type of the argument of the |
1406 | * random seed function. |
1407 | */ |
1408 | /* seedDrand01: |
1409 | * This symbol defines the macro to be used in seeding the |
1410 | * random number generator (see Drand01). |
1411 | */ |
dfe9444c |
1412 | /* RANDBITS: |
85ab1d1d |
1413 | * This symbol indicates how many bits are produced by the |
1414 | * function used to generate normalized random numbers. |
1415 | * Values include 15, 16, 31, and 48. |
dfe9444c |
1416 | */ |
85ab1d1d |
1417 | #define Drand01() $drand01 /**/ |
1418 | #define Rand_seed_t $randseedtype /**/ |
1419 | #define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/ |
1420 | #define RANDBITS $randbits /**/ |
dfe9444c |
1421 | |
1422 | /* SSize_t: |
1423 | * This symbol holds the type used by functions that return |
1424 | * a count of bytes or an error condition. It must be a signed type. |
1425 | * It is usually ssize_t, but may be long or int, etc. |
1426 | * It may be necessary to include <sys/types.h> or <unistd.h> |
1427 | * to get any typedef'ed information. |
1428 | * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). |
1429 | */ |
1430 | #define SSize_t $ssizetype /* signed count of bytes */ |
1431 | |
5ff3f7a4 |
1432 | /* EBCDIC: |
1433 | * This symbol, if defined, indicates that this system uses |
1434 | * EBCDIC encoding. |
1435 | */ |
1436 | #$ebcdic EBCDIC /**/ |
1437 | |
dfe9444c |
1438 | /* OSNAME: |
1439 | * This symbol contains the name of the operating system, as determined |
1440 | * by Configure. You shouldn't rely on it too much; the specific |
1441 | * feature tests from Configure are generally more reliable. |
1442 | */ |
1443 | #define OSNAME "$osname" /**/ |
1444 | |
dfe9444c |
1445 | /* CAT2: |
1446 | * This macro catenates 2 tokens together. |
1447 | */ |
1448 | /* STRINGIFY: |
1449 | * This macro surrounds its token with double quotes. |
1450 | */ |
1451 | #if $cpp_stuff == 1 |
1452 | #define CAT2(a,b)a/**/b |
1453 | #define STRINGIFY(a)"a" |
1454 | /* If you can get stringification with catify, tell me how! */ |
1455 | #endif |
1456 | #if $cpp_stuff == 42 |
1457 | #define CAT2(a,b)a ## b |
1458 | #define StGiFy(a)# a |
1459 | #define STRINGIFY(a)StGiFy(a) |
1460 | #endif |
1461 | #if $cpp_stuff != 1 && $cpp_stuff != 42 |
1462 | #include "Bletch: How does this C preprocessor catenate tokens?" |
1463 | #endif |
1464 | |
1cfa4ec7 |
1465 | /* CPPSTDIN: |
1466 | * This symbol contains the first part of the string which will invoke |
1467 | * the C preprocessor on the standard input and produce to standard |
1468 | * output. Typical value of "cc -E" or "/lib/cpp", but it can also |
1469 | * call a wrapper. See CPPRUN. |
1470 | */ |
1471 | /* CPPMINUS: |
1472 | * This symbol contains the second part of the string which will invoke |
1473 | * the C preprocessor on the standard input and produce to standard |
1474 | * output. This symbol will have the value "-" if CPPSTDIN needs a minus |
1475 | * to specify standard input, otherwise the value is "". |
1476 | */ |
921b2963 |
1477 | /* CPPRUN: |
1478 | * This symbol contains the string which will invoke a C preprocessor on |
1479 | * the standard input and produce to standard output. It needs to end |
1480 | * with CPPLAST, after all other preprocessor flags have been specified. |
1481 | * The main difference with CPPSTDIN is that this program will never be a |
1482 | * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is |
1483 | * available directly to the user. Note that it may well be different from |
1484 | * the preprocessor used to compile the C program. |
1485 | */ |
1cfa4ec7 |
1486 | #define CPPSTDIN "$cppstdin" |
1487 | #define CPPMINUS "$cppminus" |
921b2963 |
1488 | #define CPPRUN "$cpprun" |
1cfa4ec7 |
1489 | |
5ff3f7a4 |
1490 | /* HAS_ACCESS: |
1491 | * This manifest constant lets the C program know that the access() |
1492 | * system call is available to check for accessibility using real UID/GID. |
1493 | * (always present on UNIX.) |
1494 | */ |
1495 | #$d_access HAS_ACCESS /**/ |
1496 | |
921b2963 |
1497 | /* HAS_CSH: |
1498 | * This symbol, if defined, indicates that the C-shell exists. |
1499 | */ |
dfe9444c |
1500 | /* CSH: |
e5c9fcd0 |
1501 | * This symbol, if defined, contains the full pathname of csh. |
dfe9444c |
1502 | */ |
e5c9fcd0 |
1503 | #$d_csh HAS_CSH /**/ |
1504 | #ifdef HAS_CSH |
1505 | #define CSH "$full_csh" /**/ |
1506 | #endif |
1507 | |
5ff3f7a4 |
1508 | /* HAS_ENDGRENT: |
1509 | * This symbol, if defined, indicates that the getgrent routine is |
1510 | * available for finalizing sequential access of the group database. |
1511 | */ |
1512 | #$d_endgrent HAS_ENDGRENT /**/ |
1513 | |
e5c9fcd0 |
1514 | /* HAS_ENDHOSTENT: |
1515 | * This symbol, if defined, indicates that the endhostent() routine is |
1516 | * available to close whatever was being used for host queries. |
1517 | */ |
1518 | #$d_endhent HAS_ENDHOSTENT /**/ |
1519 | |
1520 | /* HAS_ENDNETENT: |
1521 | * This symbol, if defined, indicates that the endnetent() routine is |
1522 | * available to close whatever was being used for network queries. |
1523 | */ |
1524 | #$d_endnent HAS_ENDNETENT /**/ |
1525 | |
1526 | /* HAS_ENDPROTOENT: |
1527 | * This symbol, if defined, indicates that the endprotoent() routine is |
1528 | * available to close whatever was being used for protocol queries. |
1529 | */ |
1530 | #$d_endpent HAS_ENDPROTOENT /**/ |
1531 | |
5ff3f7a4 |
1532 | /* HAS_ENDPWENT: |
1533 | * This symbol, if defined, indicates that the getgrent routine is |
1534 | * available for finalizing sequential access of the passwd database. |
1535 | */ |
1536 | #$d_endpwent HAS_ENDPWENT /**/ |
1537 | |
e5c9fcd0 |
1538 | /* HAS_ENDSERVENT: |
1539 | * This symbol, if defined, indicates that the endservent() routine is |
1540 | * available to close whatever was being used for service queries. |
1541 | */ |
1542 | #$d_endsent HAS_ENDSERVENT /**/ |
dfe9444c |
1543 | |
5ff3f7a4 |
1544 | /* HAS_GETGRENT: |
1545 | * This symbol, if defined, indicates that the getgrent routine is |
1546 | * available for sequential access of the group database. |
1547 | */ |
1548 | #$d_getgrent HAS_GETGRENT /**/ |
1549 | |
693762b4 |
1550 | /* HAS_GETHOSTBYADDR: |
1551 | * This symbol, if defined, indicates that the gethostbyaddr() routine is |
1552 | * available to look up hosts by their IP addresses. |
1553 | */ |
1554 | #$d_gethbyaddr HAS_GETHOSTBYADDR /**/ |
1555 | |
1556 | /* HAS_GETHOSTBYNAME: |
1557 | * This symbol, if defined, indicates that the gethostbyname() routine is |
1558 | * available to look up host names in some data base or other. |
1559 | */ |
1560 | #$d_gethbyname HAS_GETHOSTBYNAME /**/ |
1561 | |
1562 | /* HAS_GETHOSTENT: |
1563 | * This symbol, if defined, indicates that the gethostent() routine is |
1564 | * available to look up host names in some data base or another. |
1565 | */ |
1566 | #$d_gethent HAS_GETHOSTENT /**/ |
1567 | |
a12fb911 |
1568 | /* HAS_GETHOSTNAME: |
1569 | * This symbol, if defined, indicates that the C program may use the |
1570 | * gethostname() routine to derive the host name. See also HAS_UNAME |
1571 | * and PHOSTNAME. |
1572 | */ |
1573 | /* HAS_UNAME: |
1574 | * This symbol, if defined, indicates that the C program may use the |
1575 | * uname() routine to derive the host name. See also HAS_GETHOSTNAME |
1576 | * and PHOSTNAME. |
1577 | */ |
1578 | /* PHOSTNAME: |
c4747d3e |
1579 | * This symbol, if defined, indicates the command to feed to the |
1580 | * popen() routine to derive the host name. See also HAS_GETHOSTNAME |
1581 | * and HAS_UNAME. Note that the command uses a fully qualified path, |
1582 | * so that it is safe even if used by a process with super-user |
1583 | * privileges. |
a12fb911 |
1584 | */ |
1585 | #$d_gethname HAS_GETHOSTNAME /**/ |
1586 | #$d_uname HAS_UNAME /**/ |
c4747d3e |
1587 | #$d_phostname HAS_PHOSTNAME |
1588 | #ifdef HAS_PHOSTNAME |
1589 | #define PHOSTNAME "$aphostname" /* How to get the host name */ |
a12fb911 |
1590 | #endif |
1591 | |
693762b4 |
1592 | /* HAS_GETNETBYADDR: |
1593 | * This symbol, if defined, indicates that the getnetbyaddr() routine is |
1594 | * available to look up networks by their IP addresses. |
1595 | */ |
1596 | #$d_getnbyaddr HAS_GETNETBYADDR /**/ |
1597 | |
1598 | /* HAS_GETNETBYNAME: |
1599 | * This symbol, if defined, indicates that the getnetbyname() routine is |
1600 | * available to look up networks by their names. |
1601 | */ |
1602 | #$d_getnbyname HAS_GETNETBYNAME /**/ |
1603 | |
e5c9fcd0 |
1604 | /* HAS_GETNETENT: |
1605 | * This symbol, if defined, indicates that the getnetent() routine is |
1606 | * available to look up network names in some data base or another. |
1607 | */ |
1608 | #$d_getnent HAS_GETNETENT /**/ |
1609 | |
1610 | /* HAS_GETPROTOENT: |
1611 | * This symbol, if defined, indicates that the getprotoent() routine is |
1612 | * available to look up protocols in some data base or another. |
1613 | */ |
1614 | #$d_getpent HAS_GETPROTOENT /**/ |
1615 | |
693762b4 |
1616 | /* HAS_GETPROTOBYNAME: |
1617 | * This symbol, if defined, indicates that the getprotobyname() |
1618 | * routine is available to look up protocols by their name. |
1619 | */ |
1620 | /* HAS_GETPROTOBYNUMBER: |
1621 | * This symbol, if defined, indicates that the getprotobynumber() |
1622 | * routine is available to look up protocols by their number. |
1623 | */ |
1624 | #$d_getpbyname HAS_GETPROTOBYNAME /**/ |
1625 | #$d_getpbynumber HAS_GETPROTOBYNUMBER /**/ |
1626 | |
5ff3f7a4 |
1627 | /* HAS_GETPWENT: |
1628 | * This symbol, if defined, indicates that the getpwent routine is |
1629 | * available for sequential access of the passwd database. |
1630 | * If this is not available, the older getpw() function may be available. |
1631 | */ |
1632 | #$d_getpwent HAS_GETPWENT /**/ |
1633 | |
e5c9fcd0 |
1634 | /* HAS_GETSERVENT: |
1635 | * This symbol, if defined, indicates that the getservent() routine is |
1636 | * available to look up network services in some data base or another. |
1637 | */ |
1638 | #$d_getsent HAS_GETSERVENT /**/ |
1639 | |
693762b4 |
1640 | /* HAS_GETSERVBYNAME: |
1641 | * This symbol, if defined, indicates that the getservbyname() |
1642 | * routine is available to look up services by their name. |
1643 | */ |
1644 | /* HAS_GETSERVBYPORT: |
1645 | * This symbol, if defined, indicates that the getservbyport() |
1646 | * routine is available to look up services by their port. |
1647 | */ |
1648 | #$d_getsbyname HAS_GETSERVBYNAME /**/ |
1649 | #$d_getsbyport HAS_GETSERVBYPORT /**/ |
1650 | |
5ff3f7a4 |
1651 | /* HAS_HTONL: |
1652 | * This symbol, if defined, indicates that the htonl() routine (and |
1653 | * friends htons() ntohl() ntohs()) are available to do network |
1654 | * order byte swapping. |
1655 | */ |
1656 | /* HAS_HTONS: |
1657 | * This symbol, if defined, indicates that the htons() routine (and |
1658 | * friends htonl() ntohl() ntohs()) are available to do network |
1659 | * order byte swapping. |
1660 | */ |
1661 | /* HAS_NTOHL: |
1662 | * This symbol, if defined, indicates that the ntohl() routine (and |
1663 | * friends htonl() htons() ntohs()) are available to do network |
1664 | * order byte swapping. |
1665 | */ |
1666 | /* HAS_NTOHS: |
1667 | * This symbol, if defined, indicates that the ntohs() routine (and |
1668 | * friends htonl() htons() ntohl()) are available to do network |
1669 | * order byte swapping. |
1670 | */ |
1671 | #$d_htonl HAS_HTONL /**/ |
1672 | #$d_htonl HAS_HTONS /**/ |
1673 | #$d_htonl HAS_NTOHL /**/ |
1674 | #$d_htonl HAS_NTOHS /**/ |
1675 | |
e5c9fcd0 |
1676 | /* HAS_LONG_DOUBLE: |
1677 | * This symbol will be defined if the C compiler supports long |
1678 | * doubles. |
1679 | */ |
1680 | /* LONG_DOUBLESIZE: |
1681 | * This symbol contains the size of a long double, so that the |
1682 | * C preprocessor can make decisions based on it. It is only |
1683 | * defined if the system supports long doubles. |
1684 | */ |
1685 | #$d_longdbl HAS_LONG_DOUBLE /**/ |
1686 | #ifdef HAS_LONG_DOUBLE |
1687 | #define LONG_DOUBLESIZE $longdblsize /**/ |
1688 | #endif |
1689 | |
dc45a647 |
1690 | /* HAS_LONG_LONG: |
5ff3f7a4 |
1691 | * This symbol will be defined if the C compiler supports long long. |
dc45a647 |
1692 | */ |
1693 | /* LONGLONGSIZE: |
1694 | * This symbol contains the size of a long long, so that the |
1695 | * C preprocessor can make decisions based on it. It is only |
1696 | * defined if the system supports long long. |
1697 | */ |
1698 | #$d_longlong HAS_LONG_LONG /**/ |
1699 | #ifdef HAS_LONG_LONG |
1700 | #define LONGLONGSIZE $longlongsize /**/ |
1701 | #endif |
1702 | |
ff49bff8 |
1703 | /* HAS_MMAP: |
1704 | * This symbol, if defined, indicates that the mmap system call is |
1705 | * available to map a file into memory. |
1706 | */ |
1707 | /* Mmap_t: |
1708 | * This symbol holds the return type of the mmap() system call |
1709 | * (and simultaneously the type of the first argument). |
1710 | * Usually set to 'void *' or 'cadd_t'. |
1711 | */ |
1712 | #$d_mmap HAS_MMAP /**/ |
1713 | #define Mmap_t $mmaptype /**/ |
1714 | |
5ff3f7a4 |
1715 | /* HAS_MSG: |
1716 | * This symbol, if defined, indicates that the entire msg*(2) library is |
1717 | * supported (IPC mechanism based on message queues). |
1718 | */ |
1719 | #$d_msg HAS_MSG /**/ |
1720 | |
1721 | /* HAS_SEM: |
1722 | * This symbol, if defined, indicates that the entire sem*(2) library is |
1723 | * supported. |
1724 | */ |
1725 | #$d_sem HAS_SEM /**/ |
1726 | |
1727 | /* HAS_SETGRENT: |
1728 | * This symbol, if defined, indicates that the setgrent routine is |
1729 | * available for initializing sequential access of the group database. |
1730 | */ |
1731 | #$d_setgrent HAS_SETGRENT /**/ |
1732 | |
dfe9444c |
1733 | /* HAS_SETGROUPS: |
1734 | * This symbol, if defined, indicates that the setgroups() routine is |
1735 | * available to set the list of process groups. If unavailable, multiple |
1736 | * groups are probably not supported. |
1737 | */ |
1738 | #$d_setgrps HAS_SETGROUPS /**/ |
1739 | |
693762b4 |
1740 | /* HAS_SETHOSTENT: |
1741 | * This symbol, if defined, indicates that the sethostent() routine is |
1742 | * available. |
1743 | */ |
1744 | #$d_sethent HAS_SETHOSTENT /**/ |
1745 | |
e5c9fcd0 |
1746 | /* HAS_SETNETENT: |
1747 | * This symbol, if defined, indicates that the setnetent() routine is |
1748 | * available. |
1749 | */ |
1750 | #$d_setnent HAS_SETNETENT /**/ |
1751 | |
1752 | /* HAS_SETPROTOENT: |
1753 | * This symbol, if defined, indicates that the setprotoent() routine is |
1754 | * available. |
1755 | */ |
1756 | #$d_setpent HAS_SETPROTOENT /**/ |
1757 | |
5ff3f7a4 |
1758 | /* HAS_SETPWENT: |
1759 | * This symbol, if defined, indicates that the setpwent routine is |
1760 | * available for initializing sequential access of the passwd database. |
1761 | */ |
1762 | #$d_setpwent HAS_SETPWENT /**/ |
1763 | |
e5c9fcd0 |
1764 | /* HAS_SETSERVENT: |
1765 | * This symbol, if defined, indicates that the setservent() routine is |
1766 | * available. |
1767 | */ |
1768 | #$d_setsent HAS_SETSERVENT /**/ |
1769 | |
1770 | /* HAS_SETVBUF: |
1771 | * This symbol, if defined, indicates that the setvbuf routine is |
1772 | * available to change buffering on an open stdio stream. |
1773 | * to a line-buffered mode. |
1774 | */ |
1775 | #$d_setvbuf HAS_SETVBUF /**/ |
1776 | |
5ff3f7a4 |
1777 | /* HAS_SHM: |
1778 | * This symbol, if defined, indicates that the entire shm*(2) library is |
1779 | * supported. |
1780 | */ |
1781 | #$d_shm HAS_SHM /**/ |
1782 | |
dc45a647 |
1783 | /* HAS_SOCKET: |
1784 | * This symbol, if defined, indicates that the BSD socket interface is |
1785 | * supported. |
1786 | */ |
1787 | /* HAS_SOCKETPAIR: |
1788 | * This symbol, if defined, indicates that the BSD socketpair() call is |
1789 | * supported. |
1790 | */ |
de4597cb |
1791 | /* HAS_MSG_CTRUNC: |
1792 | * This symbol, if defined, indicates that the MSG_CTRUNC is supported. |
1793 | * Checking just with #ifdef might not be enough because this symbol |
1794 | * has been known to be an enum. |
1795 | */ |
1796 | /* HAS_MSG_DONTROUTE: |
1797 | * This symbol, if defined, indicates that the MSG_DONTROUTE is supported. |
1798 | * Checking just with #ifdef might not be enough because this symbol |
1799 | * has been known to be an enum. |
1800 | */ |
1801 | /* HAS_MSG_OOB: |
1802 | * This symbol, if defined, indicates that the MSG_OOB is supported. |
1803 | * Checking just with #ifdef might not be enough because this symbol |
1804 | * has been known to be an enum. |
1805 | */ |
1806 | /* HAS_MSG_PEEK: |
1807 | * This symbol, if defined, indicates that the MSG_PEEK is supported. |
1808 | * Checking just with #ifdef might not be enough because this symbol |
1809 | * has been known to be an enum. |
1810 | */ |
1811 | /* HAS_MSG_PROXY: |
1812 | * This symbol, if defined, indicates that the MSG_PROXY is supported. |
1813 | * Checking just with #ifdef might not be enough because this symbol |
1814 | * has been known to be an enum. |
1815 | */ |
1816 | /* HAS_SCM_RIGHTS: |
1817 | * This symbol, if defined, indicates that the SCM_RIGHTS is supported. |
1818 | * Checking just with #ifdef might not be enough because this symbol |
1819 | * has been known to be an enum. |
1820 | */ |
1821 | /* HAS_SENDMSG: |
1822 | * This symbol, if defined, indicates that the sendmsg is supported |
1823 | * to send messages between sockets. You will also need struct |
1824 | * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO. |
1825 | */ |
1826 | /* HAS_RECVMSG: |
1827 | * This symbol, if defined, indicates that the recvmsg is supported |
1828 | * to send messages between sockets. You will also need struct |
1829 | * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO. |
1830 | */ |
1831 | /* HAS_STRUCT_MSGHDR: |
1832 | * This symbol, if defined, indicates that the struct msghdr |
1833 | * (BSD 4.3 or 4.4) is supported. You will also need struct |
1834 | * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO. |
1835 | */ |
1836 | /* HAS_STRUCT_CMSGHDR: |
1837 | * This symbol, if defined, indicates that the struct cmsghdr |
1838 | * (BSD 4.4) is supported. You will also need struct |
1839 | * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO. |
1840 | */ |
1841 | #$d_socket HAS_SOCKET /**/ |
1842 | #$d_sockpair HAS_SOCKETPAIR /**/ |
1843 | #$d_msg_ctrunc HAS_MSG_CTRUNC /**/ |
1844 | #$d_msg_dontroute HAS_MSG_DONTROUTE /**/ |
1845 | #$d_msg_oob HAS_MSG_OOB /**/ |
1846 | #$d_msg_peek HAS_MSG_PEEK /**/ |
1847 | #$d_msg_proxy HAS_MSG_PROXY /**/ |
1848 | #$d_scm_rights HAS_SCM_RIGHTS /**/ |
1849 | #$d_sendmsg HAS_SENDMSG /**/ |
1850 | #$d_recvmsg HAS_RECVMSG /**/ |
1851 | #$d_msghdr_s HAS_STRUCT_MSGHDR /**/ |
1852 | #$d_cmsghdr_s HAS_STRUCT_CMSGHDR /**/ |
dc45a647 |
1853 | |
5ff3f7a4 |
1854 | /* USE_STAT_BLOCKS: |
1855 | * This symbol is defined if this system has a stat structure declaring |
1856 | * st_blksize and st_blocks. |
1857 | */ |
85ab1d1d |
1858 | #$d_statblks USE_STAT_BLOCKS /**/ |
5ff3f7a4 |
1859 | |
1860 | /* HAS_STRERROR: |
1861 | * This symbol, if defined, indicates that the strerror routine is |
1862 | * available to translate error numbers to strings. See the writeup |
1863 | * of Strerror() in this file before you try to define your own. |
1864 | */ |
1865 | /* HAS_SYS_ERRLIST: |
1866 | * This symbol, if defined, indicates that the sys_errlist array is |
1867 | * available to translate error numbers to strings. The extern int |
1868 | * sys_nerr gives the size of that table. |
1869 | */ |
1870 | /* Strerror: |
1871 | * This preprocessor symbol is defined as a macro if strerror() is |
1872 | * not available to translate error numbers to strings but sys_errlist[] |
1873 | * array is there. |
1874 | */ |
1875 | #$d_strerror HAS_STRERROR /**/ |
1876 | #$d_syserrlst HAS_SYS_ERRLIST /**/ |
1877 | #define Strerror(e) $d_strerrm |
1878 | |
bd89102f |
1879 | /* HAS_UNION_SEMUN: |
1880 | * This symbol, if defined, indicates that the union semun is |
1881 | * defined by including <sys/sem.h>. If not, the user code |
1882 | * probably needs to define it as: |
1883 | * union semun { |
1884 | * int val; |
1885 | * struct semid_ds *buf; |
1886 | * unsigned short *array; |
1887 | * } |
1888 | */ |
1889 | /* USE_SEMCTL_SEMUN: |
1890 | * This symbol, if defined, indicates that union semun is |
1891 | * used for semctl IPC_STAT. |
1892 | */ |
1893 | /* USE_SEMCTL_SEMID_DS: |
1894 | * This symbol, if defined, indicates that struct semid_ds * is |
1895 | * used for semctl IPC_STAT. |
1896 | */ |
1897 | #$d_union_semun HAS_UNION_SEMUN /**/ |
1898 | #$d_semctl_semun USE_SEMCTL_SEMUN /**/ |
1899 | #$d_semctl_semid_ds USE_SEMCTL_SEMID_DS /**/ |
1900 | |
f10488a3 |
1901 | /* HAS_VFORK: |
1902 | * This symbol, if defined, indicates that vfork() exists. |
1903 | */ |
1904 | #$d_vfork HAS_VFORK /**/ |
1905 | |
dfe9444c |
1906 | /* Signal_t: |
1907 | * This symbol's value is either "void" or "int", corresponding to the |
1908 | * appropriate return type of a signal handler. Thus, you can declare |
1909 | * a signal handler using "Signal_t (*handler)()", and define the |
1910 | * handler using "Signal_t handler(sig)". |
e876cf0b |
1911 | */ |
dfe9444c |
1912 | #define Signal_t $signal_t /* Signal handler's return type */ |
1913 | |
1914 | /* Groups_t: |
1915 | * This symbol holds the type used for the second argument to |
1916 | * getgroups() and setgropus(). Usually, this is the same as |
1917 | * gidtype (gid_t) , but sometimes it isn't. |
1918 | * It can be int, ushort, uid_t, etc... |
1919 | * It may be necessary to include <sys/types.h> to get any |
1920 | * typedef'ed information. This is only required if you have |
1921 | * getgroups() or setgropus().. |
4633a7c4 |
1922 | */ |
dfe9444c |
1923 | #if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS) |
1924 | #define Groups_t $groupstype /* Type for 2nd arg to [sg]etgroups() */ |
1925 | #endif |
1926 | |
5ff3f7a4 |
1927 | /* I_GRP: |
1928 | * This symbol, if defined, indicates to the C program that it should |
1929 | * include <grp.h>. |
1930 | */ |
1931 | /* GRPASSWD: |
1932 | * This symbol, if defined, indicates to the C program that struct group |
1933 | * in <grp.h> contains gr_passwd. |
1934 | */ |
1935 | #$i_grp I_GRP /**/ |
1936 | #$d_grpasswd GRPASSWD /**/ |
1937 | |
dfe9444c |
1938 | /* I_NETDB: |
1939 | * This symbol, if defined, indicates that <netdb.h> exists and |
1940 | * should be included. |
1941 | */ |
1942 | #$i_netdb I_NETDB /**/ |
4633a7c4 |
1943 | |
c4f23d77 |
1944 | /* I_PWD: |
1945 | * This symbol, if defined, indicates to the C program that it should |
1946 | * include <pwd.h>. |
1947 | */ |
1948 | /* PWQUOTA: |
1949 | * This symbol, if defined, indicates to the C program that struct passwd |
1950 | * contains pw_quota. |
1951 | */ |
1952 | /* PWAGE: |
1953 | * This symbol, if defined, indicates to the C program that struct passwd |
1954 | * contains pw_age. |
1955 | */ |
1956 | /* PWCHANGE: |
1957 | * This symbol, if defined, indicates to the C program that struct passwd |
1958 | * contains pw_change. |
1959 | */ |
1960 | /* PWCLASS: |
1961 | * This symbol, if defined, indicates to the C program that struct passwd |
1962 | * contains pw_class. |
1963 | */ |
1964 | /* PWEXPIRE: |
1965 | * This symbol, if defined, indicates to the C program that struct passwd |
1966 | * contains pw_expire. |
1967 | */ |
1968 | /* PWCOMMENT: |
1969 | * This symbol, if defined, indicates to the C program that struct passwd |
1970 | * contains pw_comment. |
1971 | */ |
1972 | /* PWGECOS: |
1973 | * This symbol, if defined, indicates to the C program that struct passwd |
1974 | * contains pw_gecos. |
1975 | */ |
28e8609d |
1976 | /* PWPASSWD: |
1977 | * This symbol, if defined, indicates to the C program that struct passwd |
1978 | * contains pw_passwd. |
1979 | */ |
c4f23d77 |
1980 | #$i_pwd I_PWD /**/ |
1981 | #$d_pwquota PWQUOTA /**/ |
1982 | #$d_pwage PWAGE /**/ |
1983 | #$d_pwchange PWCHANGE /**/ |
1984 | #$d_pwclass PWCLASS /**/ |
1985 | #$d_pwexpire PWEXPIRE /**/ |
1986 | #$d_pwcomment PWCOMMENT /**/ |
1987 | #$d_pwgecos PWGECOS /**/ |
28e8609d |
1988 | #$d_pwpasswd PWPASSWD /**/ |
c4f23d77 |
1989 | |
de4597cb |
1990 | /* I_SYSUIO: |
1991 | * This symbol, if defined, indicates that <sys/uio.h> exists and |
1992 | * should be included. |
1993 | */ |
1994 | #$i_sysuio I_SYSUIO /**/ |
1995 | |
bfb7748a |
1996 | /* Free_t: |
1997 | * This variable contains the return type of free(). It is usually |
1998 | * void, but occasionally int. |
e876cf0b |
1999 | */ |
bfb7748a |
2000 | /* Malloc_t: |
2001 | * This symbol is the type of pointer returned by malloc and realloc. |
4633a7c4 |
2002 | */ |
bfb7748a |
2003 | #define Malloc_t $malloctype /**/ |
2004 | #define Free_t $freetype /**/ |
2005 | |
2006 | /* MYMALLOC: |
2007 | * This symbol, if defined, indicates that we're using our own malloc. |
2008 | */ |
2009 | #$d_mymalloc MYMALLOC /**/ |
4633a7c4 |
2010 | |
c4f23d77 |
2011 | /* SIG_NAME: |
2012 | * This symbol contains a list of signal names in order of |
2013 | * signal number. This is intended |
2014 | * to be used as a static array initialization, like this: |
2015 | * char *sig_name[] = { SIG_NAME }; |
2016 | * The signals in the list are separated with commas, and each signal |
2017 | * is surrounded by double quotes. There is no leading SIG in the signal |
2018 | * name, i.e. SIGQUIT is known as "QUIT". |
2019 | * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, |
2020 | * etc., where nn is the actual signal number (e.g. NUM37). |
2021 | * The signal number for sig_name[i] is stored in sig_num[i]. |
2022 | * The last element is 0 to terminate the list with a NULL. This |
2023 | * corresponds to the 0 at the end of the sig_num list. |
2024 | */ |
2025 | /* SIG_NUM: |
2026 | * This symbol contains a list of signal numbers, in the same order as the |
2027 | * SIG_NAME list. It is suitable for static array initialization, as in: |
2028 | * int sig_num[] = { SIG_NUM }; |
2029 | * The signals in the list are separated with commas, and the indices |
2030 | * within that list and the SIG_NAME list match, so it's easy to compute |
2031 | * the signal name from a number or vice versa at the price of a small |
2032 | * dynamic linear lookup. |
2033 | * Duplicates are allowed, but are moved to the end of the list. |
2034 | * The signal number corresponding to sig_name[i] is sig_number[i]. |
2035 | * if (i < NSIG) then sig_number[i] == i. |
2036 | * The last element is 0, corresponding to the 0 at the end of |
2037 | * the sig_name list. |
2038 | */ |
2039 | #define SIG_NAME $sig_name_init /**/ |
824a2ba3 |
2040 | #define SIG_NUM $sig_num_init /**/ |
c4f23d77 |
2041 | |
bfb7748a |
2042 | /* VOIDFLAGS: |
2043 | * This symbol indicates how much support of the void type is given by this |
2044 | * compiler. What various bits mean: |
2045 | * |
2046 | * 1 = supports declaration of void |
2047 | * 2 = supports arrays of pointers to functions returning void |
2048 | * 4 = supports comparisons between pointers to void functions and |
2049 | * addresses of void functions |
2050 | * 8 = suports declaration of generic void pointers |
2051 | * |
2052 | * The package designer should define VOIDUSED to indicate the requirements |
2053 | * of the package. This can be done either by #defining VOIDUSED before |
2054 | * including config.h, or by defining defvoidused in Myinit.U. If the |
2055 | * latter approach is taken, only those flags will be tested. If the |
2056 | * level of void support necessary is not present, defines void to int. |
16d20bd9 |
2057 | */ |
bfb7748a |
2058 | #ifndef VOIDUSED |
2059 | #define VOIDUSED $defvoidused |
2060 | #endif |
2061 | #define VOIDFLAGS $voidflags |
2062 | #if (VOIDFLAGS & VOIDUSED) != VOIDUSED |
2063 | #define void int /* is void to be avoided? */ |
2064 | #define M_VOID /* Xenix strikes again */ |
2065 | #endif |
16d20bd9 |
2066 | |
bfb7748a |
2067 | /* ARCHLIB: |
2068 | * This variable, if defined, holds the name of the directory in |
2069 | * which the user wants to put architecture-dependent public |
2070 | * library files for $package. It is most often a local directory |
2071 | * such as /usr/local/lib. Programs using this variable must be |
2072 | * prepared to deal with filename expansion. If ARCHLIB is the |
2073 | * same as PRIVLIB, it is not defined, since presumably the |
2074 | * program already searches PRIVLIB. |
e876cf0b |
2075 | */ |
bfb7748a |
2076 | /* ARCHLIB_EXP: |
2077 | * This symbol contains the ~name expanded version of ARCHLIB, to be used |
25f94b33 |
2078 | * in programs that are not prepared to deal with ~ expansion at run-time. |
2079 | */ |
bfb7748a |
2080 | #$d_archlib ARCHLIB "$archlib" /**/ |
2081 | #$d_archlib ARCHLIB_EXP "$archlibexp" /**/ |
25f94b33 |
2082 | |
dfe9444c |
2083 | /* DLSYM_NEEDS_UNDERSCORE: |
2084 | * This symbol, if defined, indicates that we need to prepend an |
2085 | * underscore to the symbol name before calling dlsym(). This only |
2086 | * makes sense if you *have* dlsym, which we will presume is the |
2087 | * case if you're using dl_dlopen.xs. |
2088 | */ |
2089 | #$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/ |
2090 | |
5ff3f7a4 |
2091 | /* HAS_FSEEKO: |
2092 | * This symbol, if defined, indicates that the fseeko routine is |
2093 | * available to fseek beyond 32 bits (useful for ILP32 hosts). |
2094 | */ |
2095 | #$d_fseeko HAS_FSEEKO /**/ |
2096 | |
2097 | /* HAS_FTELLO: |
2098 | * This symbol, if defined, indicates that the ftello routine is |
2099 | * available to ftell from beyond 32 bits (useful for ILP32 hosts). |
2100 | */ |
2101 | #$d_ftello HAS_FTELLO /**/ |
2102 | |
732c9516 |
2103 | /* HAS_GETMNTENT: |
2104 | * This symbol, if defined, indicates that the getmntent routine is |
2105 | * available to iterate through mounted file systems. |
2106 | */ |
2107 | #$d_getmntent HAS_GETMNTENT /**/ |
2108 | |
2109 | /* HAS_HASMNTOPT: |
2110 | * This symbol, if defined, indicates that the hasmntopt routine is |
2111 | * available to query the mount options of file systems. |
2112 | */ |
2113 | #$d_hasmntopt HAS_HASMNTOPT /**/ |
2114 | |
ff49bff8 |
2115 | /* HAS_MADVISE: |
2116 | * This symbol, if defined, indicates that the madvise system call is |
2117 | * available to map a file into memory. |
2118 | */ |
2119 | #$d_madvise HAS_MADVISE /**/ |
2120 | |
2121 | /* HAS_MPROTECT: |
2122 | * This symbol, if defined, indicates that the mprotect system call is |
2123 | * available to modify the access protection of a memory mapped file. |
2124 | */ |
2125 | #$d_mprotect HAS_MPROTECT /**/ |
2126 | |
de4597cb |
2127 | /* HAS_READV: |
2128 | * This symbol, if defined, indicates that the readv routine is |
2129 | * available to do gather reads. You will also need <sys/uio.h> |
2130 | * and there I_SYSUIO. |
2131 | */ |
2132 | #$d_readv HAS_READV /**/ |
2133 | |
dfe9444c |
2134 | /* USE_SFIO: |
2135 | * This symbol, if defined, indicates that sfio should |
2136 | * be used. |
2137 | */ |
2138 | #$d_sfio USE_SFIO /**/ |
2139 | |
104d25b7 |
2140 | /* HAS_FSTATFS: |
2141 | * This symbol, if defined, indicates that the fstatfs routine is |
732c9516 |
2142 | * available to stat filesystems of file descriptors. |
104d25b7 |
2143 | */ |
2144 | /* HAS_STRUCT_STATFS_FLAGS: |
2145 | * This symbol, if defined, indicates that the struct statfs |
2146 | * does have the f_flags member containing the mount flags of |
2147 | * the filesystem holding the file. |
732c9516 |
2148 | * This kind of struct statfs is coming from sys/mount.h (BSD), |
2149 | * not from sys/statfs.h (SYSV). |
104d25b7 |
2150 | */ |
2151 | #$d_fstatfs HAS_FSTATFS /**/ |
2152 | #$d_statfsflags HAS_STRUCT_STATFS_FLAGS /**/ |
2153 | |
2154 | /* HAS_FSTATVFS: |
2155 | * This symbol, if defined, indicates that the fstatvfs routine is |
732c9516 |
2156 | * available to stat filesystems of file descriptors. |
104d25b7 |
2157 | */ |
2158 | #$d_fstatvfs HAS_FSTATVFS /**/ |
2159 | |
cb86ce0e |
2160 | /* HAS_TELLDIR_PROTO: |
2161 | * This symbol, if defined, indicates that the system provides |
2162 | * a prototype for the telldir() function. Otherwise, it is up |
2163 | * to the program to supply one. A good guess is |
2164 | * extern long telldir _((DIR*)); |
2165 | */ |
2166 | #$d_telldirproto HAS_TELLDIR_PROTO /**/ |
2167 | |
de4597cb |
2168 | /* HAS_WRITEV: |
2169 | * This symbol, if defined, indicates that the writev routine is |
2170 | * available to do scatter writes. |
2171 | */ |
2172 | #$d_writev HAS_WRITEV /**/ |
2173 | |
5ff3f7a4 |
2174 | /* HAS_DBMINIT64: |
2175 | * This symbol, if defined, indicates that the dbminit64 routine is |
2176 | * available to open dbm files larger than 2 gigabytes. |
2177 | */ |
2178 | /* HAS_DBMCLOSE64: |
2179 | * This symbol, if defined, indicates that the dbmclose64 routine is |
2180 | * available to close dbm files larger than 2 gigabytes. |
2181 | */ |
2182 | /* HAS_FETCH64: |
2183 | * This symbol, if defined, indicates that the fetch64 routine is |
2184 | * available to fetch from dbm files larger than 2 gigabytes. |
2185 | */ |
2186 | /* HAS_STORE64: |
2187 | * This symbol, if defined, indicates that the store64 routine is |
2188 | * available to store to dbm files larger than 2 gigabytes. |
2189 | */ |
2190 | /* HAS_DELETE64: |
2191 | * This symbol, if defined, indicates that the delete64 routine is |
2192 | * available to delete from dbm files larger than 2 gigabytes. |
2193 | */ |
2194 | /* HAS_FIRSTKEY64: |
2195 | * This symbol, if defined, indicates that the firstkey64 routine is |
2196 | * available to firstkey in dbm files larger than 2 gigabytes. |
2197 | */ |
2198 | /* HAS_NEXTKEY64: |
2199 | * This symbol, if defined, indicates that the nextkey64 routine is |
2200 | * available to nextkey in dbm files larger than 2 gigabytes. |
2201 | */ |
2202 | #$d_dbminit64 HAS_DBMINIT64 /**/ |
2203 | #$d_dbmclose64 HAS_DBMCLOSE64 /**/ |
2204 | #$d_fetch64 HAS_FETCH64 /**/ |
2205 | #$d_store64 HAS_STORE64 /**/ |
2206 | #$d_delete64 HAS_DELETE64 /**/ |
2207 | #$d_firstkey64 HAS_FIRSTKEY64 /**/ |
2208 | #$d_nextkey64 HAS_NEXTKEY64 /**/ |
2209 | |
dfe9444c |
2210 | /* USE_DYNAMIC_LOADING: |
2211 | * This symbol, if defined, indicates that dynamic loading of |
2212 | * some sort is available. |
2213 | */ |
2214 | #$usedl USE_DYNAMIC_LOADING /**/ |
2215 | |
2216 | /* DB_Prefix_t: |
2217 | * This symbol contains the type of the prefix structure element |
2218 | * in the <db.h> header file. In older versions of DB, it was |
2219 | * int, while in newer ones it is u_int32_t. |
2220 | */ |
2221 | /* DB_Hash_t: |
2222 | * This symbol contains the type of the prefix structure element |
2223 | * in the <db.h> header file. In older versions of DB, it was |
2224 | * int, while in newer ones it is size_t. |
2225 | */ |
2226 | #define DB_Hash_t $db_hashtype /**/ |
2227 | #define DB_Prefix_t $db_prefixtype /**/ |
2228 | |
5ff3f7a4 |
2229 | /* I_INTTYPES: |
2230 | * This symbol, if defined, indicates to the C program that it should |
2231 | * include <inttypes.h>. |
2232 | */ |
2233 | /* HAS_INT64_T: |
2234 | * This symbol will defined if the C compiler supports int64_t. |
2235 | * Usually the <inttypes.h> needs to be included, but sometimes |
2236 | * <sys/types.h> is enough. |
2237 | */ |
2238 | #$i_inttypes I_INTTYPES /**/ |
2239 | #$d_int64t HAS_INT64_T /**/ |
2240 | |
e7fb4fcc |
2241 | /* I_MNTENT: |
2242 | * This symbol, if defined, indicates that <mntent.h> exists and |
2243 | * should be included. |
2244 | */ |
2245 | #$i_mntent I_MNTENT /**/ |
2246 | |
5b34fd99 |
2247 | /* I_POLL: |
2248 | * This symbol, if defined, indicates that <poll.h> exists and |
2249 | * should be included. |
2250 | */ |
2251 | #$i_poll I_POLL /**/ |
2252 | |
ff49bff8 |
2253 | /* I_SYS_MMAN: |
2254 | * This symbol, if defined, indicates that <sys/mman.h> exists and |
2255 | * should be included. |
2256 | */ |
2257 | #$i_sysmman I_SYS_MMAN /**/ |
2258 | |
104d25b7 |
2259 | /* I_SYS_MOUNT: |
2260 | * This symbol, if defined, indicates that <sys/mount.h> exists and |
2261 | * should be included. |
2262 | */ |
2263 | #$i_sysmount I_SYS_MOUNT /**/ |
2264 | |
2265 | /* I_SYS_STATVFS: |
2266 | * This symbol, if defined, indicates that <sys/statvfs.h> exists and |
2267 | * should be included. |
2268 | */ |
2269 | #$i_sysstatvfs I_SYS_STATVFS /**/ |
2270 | |
2271 | /* INSTALL_USR_BIN_PERL: |
2272 | * This symbol, if defined, indicates that Perl is to be installed |
2273 | * also as /usr/bin/perl. |
2274 | */ |
2275 | #$installusrbinperl INSTALL_USR_BIN_PERL /**/ |
2276 | |
5ff3f7a4 |
2277 | /* HAS_FSTAT64: |
2278 | * This symbol, if defined, indicates that the fstat64 routine is |
2279 | * available to stat files (fds) larger than 2 gigabytes. |
2280 | */ |
2281 | /* HAS_FTRUNCATE64: |
2282 | * This symbol, if defined, indicates that the ftruncate64 routine is |
2283 | * available to tell files larger than 2 gigabytes. |
2284 | */ |
2285 | /* HAS_LSEEK64: |
2286 | * This symbol, if defined, indicates that the lseek64 routine is |
2287 | * available to seek files larger than 2 gigabytes. |
2288 | */ |
2289 | /* HAS_LSTAT64: |
2290 | * This symbol, if defined, indicates that the lstat64 routine is |
2291 | * available to stat files (symlinks) larger than 2 gigabytes. |
2292 | */ |
2293 | /* HAS_OPEN64: |
2294 | * This symbol, if defined, indicates that the open64 routine is |
2295 | * available to open files larger than 2 gigabytes. |
2296 | */ |
2297 | /* HAS_OPENDIR64: |
2298 | * This symbol, if defined, indicates that the opendir64 routine is |
2299 | * available to opendir files larger than 2 gigabytes. |
2300 | */ |
2301 | /* HAS_READDIR64: |
2302 | * This symbol, if defined, indicates that the readdir64 routine is |
2303 | * available to readdir files larger than 2 gigabytes. |
2304 | */ |
2305 | /* HAS_SEEKDIR64: |
2306 | * This symbol, if defined, indicates that the seekdir64 routine is |
2307 | * available to seekdir files larger than 2 gigabytes. |
2308 | */ |
2309 | /* HAS_STAT64: |
85ab1d1d |
2310 | * This symbol, if defined, indicates that the stat64 routine is |
5ff3f7a4 |
2311 | * available to stat files larger than 2 gigabytes. |
2312 | */ |
2313 | /* HAS_TELLDIR64: |
2314 | * This symbol, if defined, indicates that the telldir64 routine is |
2315 | * available to telldir files larger than 2 gigabytes. |
2316 | */ |
2317 | /* HAS_TRUNCATE64: |
2318 | * This symbol, if defined, indicates that the truncate64 routine is |
2319 | * available to truncate files larger than 2 gigabytes. |
2320 | */ |
2321 | /* HAS_OFF64_T: |
2322 | * This symbol will be defined if the C compiler supports off64_t. |
2323 | */ |
2324 | /* HAS_STRUCT_DIRENT64: |
2325 | * This symbol will be defined if the C compiler supports struct dirent64. |
2326 | */ |
2327 | #$d_fstat64 HAS_FSTAT64 /**/ |
2328 | #$d_ftruncate64 HAS_FTRUNCATE64 /**/ |
2329 | #$d_lseek64 HAS_LSEEK64 /**/ |
2330 | #$d_lstat64 HAS_LSTAT64 /**/ |
2331 | #$d_open64 HAS_OPEN64 /**/ |
2332 | #$d_opendir64 HAS_OPENDIR64 /**/ |
2333 | #$d_readdir64 HAS_READDIR64 /**/ |
2334 | #$d_seekdir64 HAS_SEEKDIR64 /**/ |
2335 | #$d_stat64 HAS_STAT64 /**/ |
2336 | #$d_telldir64 HAS_TELLDIR64 /**/ |
2337 | #$d_truncate64 HAS_TRUNCATE64 /**/ |
2000072c |
2338 | #$d_off64_t HAS_OFF64_T /**/ |
de4597cb |
2339 | #$d_dirent64_s HAS_STRUCT_DIRENT64 /**/ |
5ff3f7a4 |
2340 | |
bfb7748a |
2341 | /* PRIVLIB: |
2342 | * This symbol contains the name of the private library for this package. |
2343 | * The library is private in the sense that it needn't be in anyone's |
2344 | * execution path, but it should be accessible by the world. The program |
2345 | * should be prepared to do ~ expansion. |
2346 | */ |
2347 | /* PRIVLIB_EXP: |
2348 | * This symbol contains the ~name expanded version of PRIVLIB, to be used |
2349 | * in programs that are not prepared to deal with ~ expansion at run-time. |
2350 | */ |
2351 | #define PRIVLIB "$privlib" /**/ |
2352 | #define PRIVLIB_EXP "$privlibexp" /**/ |
2353 | |
5ff3f7a4 |
2354 | /* SELECT_MIN_BITS: |
2355 | * This symbol holds the minimum number of bits operated by select. |
2356 | * That is, if you do select(n, ...), how many bits at least will be |
2357 | * cleared in the masks if some activity is detected. Usually this |
2358 | * is either n or 32*ceil(n/32), especially many little-endians do |
2359 | * the latter. This is only useful if you have select(), naturally. |
2360 | */ |
2361 | #define SELECT_MIN_BITS $selectminbits /**/ |
2362 | |
bfb7748a |
2363 | /* SITEARCH: |
2364 | * This symbol contains the name of the private library for this package. |
2365 | * The library is private in the sense that it needn't be in anyone's |
2366 | * execution path, but it should be accessible by the world. The program |
2367 | * should be prepared to do ~ expansion. |
2368 | * The standard distribution will put nothing in this directory. |
2369 | * Individual sites may place their own extensions and modules in |
2370 | * this directory. |
2371 | */ |
2372 | /* SITEARCH_EXP: |
2373 | * This symbol contains the ~name expanded version of SITEARCH, to be used |
2374 | * in programs that are not prepared to deal with ~ expansion at run-time. |
2375 | */ |
2376 | #define SITEARCH "$sitearch" /**/ |
2377 | #define SITEARCH_EXP "$sitearchexp" /**/ |
2378 | |
2379 | /* SITELIB: |
2380 | * This symbol contains the name of the private library for this package. |
2381 | * The library is private in the sense that it needn't be in anyone's |
2382 | * execution path, but it should be accessible by the world. The program |
2383 | * should be prepared to do ~ expansion. |
2384 | * The standard distribution will put nothing in this directory. |
2385 | * Individual sites may place their own extensions and modules in |
2386 | * this directory. |
2387 | */ |
2388 | /* SITELIB_EXP: |
2389 | * This symbol contains the ~name expanded version of SITELIB, to be used |
2390 | * in programs that are not prepared to deal with ~ expansion at run-time. |
2391 | */ |
2392 | #define SITELIB "$sitelib" /**/ |
2393 | #define SITELIB_EXP "$sitelibexp" /**/ |
2394 | |
568ef1f6 |
2395 | /* STARTPERL: |
2396 | * This variable contains the string to put in front of a perl |
2397 | * script to make sure (one hopes) that it runs with perl and not |
2398 | * some shell. |
2399 | */ |
2400 | #define STARTPERL "$startperl" /**/ |
2401 | |
5ff3f7a4 |
2402 | /* HAS_FGETPOS64: |
2403 | * This symbol, if defined, indicates that the fgetpos64 routine is |
2404 | * available to getpos files larger than 2 gigabytes. |
2405 | */ |
2406 | /* HAS_FOPEN64: |
2407 | * This symbol, if defined, indicates that the fopen64 routine is |
2408 | * available to open files larger than 2 gigabytes. |
2409 | */ |
2410 | /* HAS_FREOPEN64: |
2411 | * This symbol, if defined, indicates that the freopen64 routine is |
2412 | * available to reopen files larger than 2 gigabytes. |
2413 | */ |
2414 | /* HAS_FSEEK64: |
2415 | * This symbol, if defined, indicates that the fseek64 routine is |
2416 | * available to seek files larger than 2 gigabytes. |
2417 | */ |
2418 | /* HAS_FSEEKO64: |
2419 | * This symbol, if defined, indicates that the fseeko64 routine is |
2420 | * available to seek files larger than 2 gigabytes. |
2421 | */ |
2422 | /* HAS_FSETPOS64: |
2423 | * This symbol, if defined, indicates that the fsetpos64 routine is |
2424 | * available to setpos files larger than 2 gigabytes. |
2425 | */ |
2426 | /* HAS_FTELL64: |
2427 | * This symbol, if defined, indicates that the ftell64 routine is |
2428 | * available to tell files larger than 2 gigabytes. |
2429 | */ |
2430 | /* HAS_FTELLO64: |
2431 | * This symbol, if defined, indicates that the ftello64 routine is |
2432 | * available to tell files larger than 2 gigabytes. |
2433 | */ |
2434 | /* HAS_TMPFILE64: |
2435 | * This symbol, if defined, indicates that the tmpfile64 routine is |
2436 | * available to tmpfile files larger than 2 gigabytes. |
2437 | */ |
2438 | #$d_fgetpos64 HAS_FGETPOS64 /**/ |
2439 | #$d_fopen64 HAS_FOPEN64 /**/ |
2440 | #$d_freopen64 HAS_FREOPEN64 /**/ |
2441 | #$d_fseek64 HAS_FSEEK64 /**/ |
2442 | #$d_fseeko64 HAS_FSEEKO64 /**/ |
2443 | #$d_fsetpos64 HAS_FSETPOS64 /**/ |
2444 | #$d_ftell64 HAS_FTELL64 /**/ |
2445 | #$d_ftello64 HAS_FTELLO64 /**/ |
2446 | #$d_tmpfile64 HAS_TMPFILE64 /**/ |
2447 | |
2448 | /* USE_64_BITS: |
85ab1d1d |
2449 | * This symbol, if defined, indicates that 64-bit interfaces should |
2450 | * be used when available. If not defined, the native default interfaces |
5ff3f7a4 |
2451 | * will be used (be they 32 or 64 bits). |
2452 | */ |
2453 | #$use64bits USE_64_BITS /**/ |
2454 | |
104d25b7 |
2455 | /* MULTIPLICITY: |
2456 | * This symbol, if defined, indicates that Perl should |
2457 | * be built to use multiplicity. |
2458 | */ |
2459 | #$usemultiplicity MULTIPLICITY /**/ |
2460 | |
e876cf0b |
2461 | /* USE_PERLIO: |
2462 | * This symbol, if defined, indicates that the PerlIO abstraction should |
2463 | * be used throughout. If not defined, stdio should be |
2464 | * used in a fully backward compatible manner. |
2465 | */ |
2466 | #$useperlio USE_PERLIO /**/ |
2467 | |
85ab1d1d |
2468 | /* HAS_DRAND48_PROTO: |
2469 | * This symbol, if defined, indicates that the system provides |
2470 | * a prototype for the drand48() function. Otherwise, it is up |
2471 | * to the program to supply one. A good guess is |
2472 | * extern double drand48 _((void)); |
2473 | */ |
2474 | #$d_drand48proto HAS_DRAND48_PROTO /**/ |
2475 | |
dc45a647 |
2476 | /* HAS_GETHOST_PROTOS: |
2477 | * This symbol, if defined, indicates that <netdb.h> includes |
2478 | * prototypes for gethostent(), gethostbyname(), and |
2479 | * gethostbyaddr(). Otherwise, it is up to the program to guess |
2480 | * them. See netdbtype.U for probing for various Netdb_xxx_t types. |
2481 | */ |
2482 | #$d_gethostprotos HAS_GETHOST_PROTOS /**/ |
2483 | |
2484 | /* HAS_GETNET_PROTOS: |
2485 | * This symbol, if defined, indicates that <netdb.h> includes |
2486 | * prototypes for getnetent(), getnetbyname(), and |
2487 | * getnetbyaddr(). Otherwise, it is up to the program to guess |
2488 | * them. See netdbtype.U for probing for various Netdb_xxx_t types. |
2489 | */ |
2490 | #$d_getnetprotos HAS_GETNET_PROTOS /**/ |
2491 | |
2492 | /* HAS_GETPROTO_PROTOS: |
2493 | * This symbol, if defined, indicates that <netdb.h> includes |
2494 | * prototypes for getprotoent(), getprotobyname(), and |
2495 | * getprotobyaddr(). Otherwise, it is up to the program to guess |
2496 | * them. See netdbtype.U for probing for various Netdb_xxx_t types. |
2497 | */ |
2498 | #$d_getprotoprotos HAS_GETPROTO_PROTOS /**/ |
2499 | |
2500 | /* HAS_GETSERV_PROTOS: |
2501 | * This symbol, if defined, indicates that <netdb.h> includes |
2502 | * prototypes for getservent(), getservbyname(), and |
2503 | * getservbyaddr(). Otherwise, it is up to the program to guess |
2504 | * them. See netdbtype.U for probing for various Netdb_xxx_t types. |
2505 | */ |
2506 | #$d_getservprotos HAS_GETSERV_PROTOS /**/ |
2507 | |
dfe9444c |
2508 | /* Netdb_host_t: |
2509 | * This symbol holds the type used for the 1st argument |
2510 | * to gethostbyaddr(). |
8e07c86e |
2511 | */ |
dfe9444c |
2512 | /* Netdb_hlen_t: |
2513 | * This symbol holds the type used for the 2nd argument |
2514 | * to gethostbyaddr(). |
2515 | */ |
2516 | /* Netdb_name_t: |
2517 | * This symbol holds the type used for the argument to |
2518 | * gethostbyname(). |
2519 | */ |
2520 | /* Netdb_net_t: |
2521 | * This symbol holds the type used for the 1st argument to |
2522 | * getnetbyaddr(). |
2523 | */ |
2524 | #define Netdb_host_t $netdb_host_type /**/ |
2525 | #define Netdb_hlen_t $netdb_hlen_type /**/ |
2526 | #define Netdb_name_t $netdb_name_type /**/ |
2527 | #define Netdb_net_t $netdb_net_type /**/ |
2528 | |
2529 | /* Select_fd_set_t: |
2530 | * This symbol holds the type used for the 2nd, 3rd, and 4th |
2531 | * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET |
2532 | * is defined, and 'int *' otherwise. This is only useful if you |
2533 | * have select(), of course. |
2534 | */ |
2535 | #define Select_fd_set_t $selecttype /**/ |
2536 | |
2537 | /* ARCHNAME: |
2538 | * This symbol holds a string representing the architecture name. |
2539 | * It may be used to construct an architecture-dependant pathname |
2540 | * where library files may be held under a private library, for |
2541 | * instance. |
2542 | */ |
2543 | #define ARCHNAME "$archname" /**/ |
2544 | |
ef4af2be |
2545 | /* OLD_PTHREAD_CREATE_JOINABLE: |
13666627 |
2546 | * This symbol, if defined, indicates how to create pthread |
ef4af2be |
2547 | * in joinable (aka undetached) state. NOTE: not defined |
2548 | * if pthread.h already has defined PTHREAD_CREATE_JOINABLE |
2549 | * (the new version of the constant). |
104d25b7 |
2550 | * If defined, known values are PTHREAD_CREATE_UNDETACHED |
13666627 |
2551 | * and __UNDETACHED. |
2552 | */ |
ef4af2be |
2553 | #$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/ |
13666627 |
2554 | |
31dfa2f6 |
2555 | /* HAS_PTHREAD_YIELD: |
2556 | * This symbol, if defined, indicates that the pthread_yield |
2557 | * routine is available to yield the execution of the current |
2558 | * thread. sched_yield is preferable to pthread_yield. |
2559 | */ |
1cfa4ec7 |
2560 | /* SCHED_YIELD: |
2561 | * This symbol defines the way to yield the execution of |
2562 | * the current thread. Known ways are sched_yield, |
2563 | * pthread_yield, and pthread_yield with NULL. |
c4f23d77 |
2564 | */ |
31dfa2f6 |
2565 | /* HAS_SCHED_YIELD: |
2566 | * This symbol, if defined, indicates that the sched_yield |
2567 | * routine is available to yield the execution of the current |
2568 | * thread. sched_yield is preferable to pthread_yield. |
2569 | */ |
2570 | #$d_pthread_yield HAS_PTHREAD_YIELD /**/ |
1cfa4ec7 |
2571 | #define SCHED_YIELD $sched_yield /**/ |
31dfa2f6 |
2572 | #$d_sched_yield HAS_SCHED_YIELD /**/ |
dfe9444c |
2573 | |
7f3d1cf1 |
2574 | /* I_MACH_CTHREADS: |
2575 | * This symbol, if defined, indicates to the C program that it should |
2576 | * include <mach/cthreads.h>. |
2577 | */ |
2578 | #$i_machcthr I_MACH_CTHREADS /**/ |
2579 | |
dfe9444c |
2580 | /* USE_THREADS: |
2581 | * This symbol, if defined, indicates that Perl should |
2582 | * be built to use threads. |
2583 | */ |
693762b4 |
2584 | /* OLD_PTHREADS_API: |
2585 | * This symbol, if defined, indicates that Perl should |
2586 | * be built to use the old draft POSIX threads API. |
2587 | */ |
dfe9444c |
2588 | #$usethreads USE_THREADS /**/ |
693762b4 |
2589 | #$d_oldpthreads OLD_PTHREADS_API /**/ |
8e07c86e |
2590 | |
dc45a647 |
2591 | /* Time_t: |
2592 | * This symbol holds the type returned by time(). It can be long, |
2593 | * or time_t on BSD sites (in which case <sys/types.h> should be |
2594 | * included). |
2595 | */ |
2596 | #define Time_t $timetype /* Time type */ |
2597 | |
2598 | /* HAS_TIMES: |
2599 | * This symbol, if defined, indicates that the times() routine exists. |
2600 | * Note that this became obsolete on some systems (SUNOS), which now |
2601 | * use getrusage(). It may be necessary to include <sys/times.h>. |
2602 | */ |
2603 | #$d_times HAS_TIMES /**/ |
2604 | |
2605 | /* Fpos_t: |
2606 | * This symbol holds the type used to declare file positions in libc. |
2607 | * It can be fpos_t, long, uint, etc... It may be necessary to include |
2608 | * <sys/types.h> to get any typedef'ed information. |
2609 | */ |
2610 | #define Fpos_t $fpostype /* File position type */ |
2611 | |
2612 | /* Gid_t: |
2613 | * This symbol holds the return type of getgid() and the type of |
2614 | * argument to setrgid() and related functions. Typically, |
2615 | * it is the type of group ids in the kernel. It can be int, ushort, |
2616 | * uid_t, etc... It may be necessary to include <sys/types.h> to get |
2617 | * any typedef'ed information. |
2618 | */ |
2619 | #define Gid_t $gidtype /* Type for getgid(), etc... */ |
2620 | |
2621 | /* Off_t: |
2622 | * This symbol holds the type used to declare offsets in the kernel. |
2623 | * It can be int, long, off_t, etc... It may be necessary to include |
2624 | * <sys/types.h> to get any typedef'ed information. |
2625 | */ |
aa5812c3 |
2626 | /* LSEEKSIZE: |
2627 | * This symbol holds the number of bytes used by the Off_t. |
2628 | */ |
dc45a647 |
2629 | #define Off_t $lseektype /* <offset> type */ |
aa5812c3 |
2630 | #define LSEEKSIZE $lseeksize /* <offset> size */ |
dc45a647 |
2631 | |
2632 | /* Mode_t: |
2633 | * This symbol holds the type used to declare file modes |
2634 | * for systems calls. It is usually mode_t, but may be |
2635 | * int or unsigned short. It may be necessary to include <sys/types.h> |
2636 | * to get any typedef'ed information. |
2637 | */ |
2638 | #define Mode_t $modetype /* file mode parameter for system calls */ |
2639 | |
2640 | /* Pid_t: |
2641 | * This symbol holds the type used to declare process ids in the kernel. |
2642 | * It can be int, uint, pid_t, etc... It may be necessary to include |
2643 | * <sys/types.h> to get any typedef'ed information. |
2644 | */ |
2645 | #define Pid_t $pidtype /* PID type */ |
2646 | |
2647 | /* Size_t: |
2648 | * This symbol holds the type used to declare length parameters |
2649 | * for string functions. It is usually size_t, but may be |
2650 | * unsigned long, int, etc. It may be necessary to include |
2651 | * <sys/types.h> to get any typedef'ed information. |
2652 | */ |
2653 | #define Size_t $sizetype /* length paramater for string functions */ |
2654 | |
2655 | /* Uid_t: |
2656 | * This symbol holds the type used to declare user ids in the kernel. |
2657 | * It can be int, ushort, uid_t, etc... It may be necessary to include |
2658 | * <sys/types.h> to get any typedef'ed information. |
2659 | */ |
2660 | #define Uid_t $uidtype /* UID type */ |
2661 | |
fe14fcc3 |
2662 | #endif |
8d063cd8 |
2663 | !GROK!THIS! |