revert parts of change#2990 to preserve predictable usage of Win32::Foo()

[p5sagit/p5-mst-13.2.git] / README.hpux

If you read this file _as_is_, just ignore the funny characters you
see. It is written in the POD format (see pod/perlpod.pod) which is
specially designed to be readable as is.

=head1 NAME

perlhpux - Perl version 5 on Hewlett-Packard Unix (HP-UX) systems

=head1 DESCRIPTION

This document describes various features of HP's Unix operating system (HP-UX)
that will affect how Perl version 5 (hereafter just Perl) is compiled and/or
runs.

=head2 Compiling Perl 5 on HP-UX

When compiling Perl, the use of an ANSI C compiler is highly recommended.
The C compiler that ships with all HP-UX systems is a K&R compiler that
should only be used to build new kernels.

Perl can be compiled with either HP's ANSI C compiler or with gcc.  The
former is recommended, as not only can it compile Perl with no difficulty,
but also can take advantage of features listed later that require the use
of HP compiler-specific command-line flags.

If you decide to use gcc, make sure your installation is recent and complete,
and be sure to read the Perl README file for more gcc-specific details.

=head2 PA-RISC

HP's current Unix systems run on its own Precision Architecture (PA-RISC) chip.
HP-UX used to run on the Motorola MC68000 family of chips, but any machine with
this chip in it is quite obsolete and this document will not attempt to address
issues for compiling Perl on the Motorola chipset.

The most recent version of PA-RISC at the time of this document's last update
is 2.0.

=head2 PA-RISC 1.0

The original version of PA-RISC, HP no longer sells any system with this chip.

The following systems contain PA-RISC 1.0 chips:

    600, 635, 645, 800, 808, 815, 822, 825, 832, 834, 835, 840,
    842, 845, 850, 852, 855, 860, 865, 870, 890

=head2 PA-RISC 1.1

An upgrade to the PA-RISC design, it shipped for many years in many different
system.

The following systems contain with PA-RISC 1.1 chips:

    705, 710, 712, 715, 720, 722, 725, 728, 730, 735, 743, 745, 747, 750,
    755, 770, 807S, 817S, 827S, 837S, 847S, 857S, 867S, 877S, 887S, 897S,
    D200, D210, D220, D230, D250, D260, D310, D320, D330, D350, D360, D400,
    E25, E35, E45, E55, F10, F20, F30, G30, G40, G50, G60, G70, H30, H40,
    H50, H60, H70, I30, I40, I50, I60, I70, K100, K200, K210, K220, K400,
    K410, K420, T500, T520


=head2 PA-RISC 2.0

The most recent upgrade to the PA-RISC design, it added support for 64-bit
integer data.

The following systems contain PA-RISC 2.0 chips:

    D270, D280, D370, D380, K250, K260, K370, K380, K450, K460, K570, K580,
    T600, V2200

=head2 Portability Between PA-RISC Versions

An executable compiled on a PA-RISC 2.0 platform will not execute on a
PA-RISC 1.1 platform, even if they are running the same version of HP-UX.
If you are building Perl on a PA-RISC 2.0 platform and want that Perl to
to also run on a PA-RISC 1.1, the compiler flag +DAportable should be used.

It is no longer possible to compile PA-RISC 1.0 executables on either the
PA-RISC 1.1 and 2.0 platforms.

=head2 Building Dynamic Extensions on HP-UX

HP-UX supports dynamically loadable libraries (shared libraries).
Shared libraries end with the suffix .sl.

Shared libraries created on a platform using a particular PA-RISC version
are not usable on platforms using an earlier PA-RISC version by default.
However, this backwards compatibility may be enabled using the same
+DAportable compiler flag (with the same PA-RISC 1.0 caveat mentioned above).

To create a shared library, the following steps must be performed:

    1. Compile source modules with +z or +Z flag to create a .o module
       which contains Position-Independent Code (PIC).  The linker will
       tell you in the next step if +Z was needed.

    2. Link the shared library using the -b flag.  If the code calls
       any functions in other system libraries (e.g., libm), it must
       be included on this line.

(Note that these steps are usually handled automatically by the extension's
Makefile).

If these dependent libraries are not listed at shared library creation
time, you will get fatal "Unresolved symbol" errors at run time when the
library is loaded.

You may create a shared library that referers to another library, which
may be either an archive library or a shared library.  If it is a
shared library, this is called a "dependent library".
The dependent library's name is recorded in the main shared library,
but it is not linked into the shared library.
Instead, it is loaded when the main shared library is loaded.

If the referred library is an archive library, then it is treated as a
simple collection of .o modules (all of which must contain PIC).  These
modules are then linked into the shared library.

Note that it is okay to create a library which contains a dependent library
that is already linked into perl.

It is no longer possible to link PA-RISC 1.0 shared libraries.

=head2 The HP ANSI C Compiler

When using this compiler to build Perl, you should make sure that
the flag -Aa is added to the cpprun and cppstdin variables in the
config.sh file.

=head2 Using Large Files with Perl

Beginning with HP-UX version 10.10, files larger than 2GB (2^31) may be
created and manipulated.
Three separate methods of doing this are available.
The best method is to compile Perl using the -D_FILE_OFFSET_BITS=64
compiler flag.
This causes Perl to be compiled using structures and functions in which
these are 64 bits wide, rather than 32 bits wide.

There are only two drawbacks to this approach:
the first is that the seek and tell functions (both the builtin version
and the POSIX module's version) will not correctly
function for these large files
(POSIX declared the offset arguments in seek and tell as being of type long).
The second is that any extension which calls any file-manipulating C function
will need to be recompiled.

=head2 Threaded Perl

It is impossible to compile a version of threaded Perl on any version of
HP-UX before 10.30, and it is strongly suggested that you be running on
HP-UX 11.00 at least.

To compile Perl with thread, add -Dusethreads to the arguments of Configure.
Ensure that the -D_POSIX_C_SOURCE=199506L compiler flag is automatically
added to the list of flags.  Also make sure that -lpthread is listed before
-lc in the list of libraries to link Perl with.

As of the date of this document, Perl threads are not fully supported on HP-UX.

=head2 64-bit Perl

Beginning with HP-UX 11.00, programs compiled under HP-UX can take advantage
of the LP64 programming environment (LP64 means Longs and Pointers are 64 bits
wide).

Work is being performed on Perl to make it 64-bit compliant on all versions
of Unix.  Once this is complete, scalar variables will be able to hold
numbers larger than 2^32 with complete precision.

As of the date of this document, Perl is not 64-bit compliant on HP-UX.

Should a user wish to experiment with compiling Perl in the LP64 environment,
the following steps must be taken: libraries must be searched only within
/lib/pa20_64, the compiler flag +DD64 must be used, and the C library is
now located at /lib/pa20_64/libc.sl.

On the brighter side, the large file problem goes away, as longs are now
64 bits wide.

=head1 AUTHOR

Jeff Okamoto <okamoto@corp.hp.com>

With much assistance regarding shared libraries from Marc Sabatella.

=head1 DATE

Version 0.1: 1999/2/22

=cut