Commit | Line | Data |
8ed6d636 |
1 | #! /bin/sh |
2 | |
3 | # This file is used to create generic Makefile for cross-compile |
4 | # (borrowed from Makefile.SH) |
5 | # (now only small changes are done to establish cross-compilation) |
6 | # miniperl removed from here, as this is built on HOST |
7 | |
8 | Makefile=Makefile-cross-$CROSS_NAME |
9 | |
10 | . Cross/config-${CROSS_NAME}.sh |
11 | |
12 | # H.Merijn Brand [17 Feb 2004] |
13 | # This comment is just to ensure that Configure will find variables that |
14 | # are removed/replaced in patches on blead, but are still needed in the |
15 | # 5.8.x, 5.6.x and 5.005.x maintainance tracks. |
16 | # metaconfig -m will scan all .SH files on this level (not deeper), and |
17 | # not in x2p and other subfolders. This file is as good as any .SH |
18 | # patch references |
19 | # #22227 $baserev |
20 | # #22302 $yacc $byacc |
21 | |
22 | # H.Merijn Brand [30 Oct 2004] |
23 | # Mentioned for the same reason for future reference |
24 | # #23434 $d_strlcat $d_strlcpy |
25 | |
26 | : This forces SH files to create target in same directory as SH file. |
27 | : This is so that make depend always knows where to find SH derivatives. |
28 | case "$0" in |
29 | */*) cd `expr X$0 : 'X\(.*\)/'` ;; |
30 | esac |
31 | |
8ed6d636 |
32 | linklibperl='$(LIBPERL)' |
33 | shrpldflags='$(LDDLFLAGS)' |
34 | ldlibpth='' |
35 | DPERL_EXTERNAL_GLOB='-DPERL_EXTERNAL_GLOB' |
36 | case "$useshrplib" in |
37 | true) |
38 | # Prefix all runs of 'miniperl' and 'perl' with |
39 | # $ldlibpth so that ./perl finds *this* shared libperl. |
40 | case "$LD_LIBRARY_PATH" in |
41 | '') |
42 | ldlibpth="LD_LIBRARY_PATH=`pwd`";; |
43 | *) |
44 | ldlibpth="LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH}";; |
45 | esac |
46 | |
47 | pldlflags="$cccdlflags" |
3b333d01 |
48 | static_ldflags='' |
8ed6d636 |
49 | case "${osname}${osvers}" in |
50 | next4*) |
51 | ld=libtool |
52 | lddlflags="-dynamic -undefined warning -framework System \ |
53 | -compatibility_version 1 -current_version $patchlevel \ |
54 | -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@" |
55 | ;; |
56 | rhapsody*|darwin*) |
57 | shrpldflags="${ldflags} -dynamiclib \ |
58 | -compatibility_version \ |
59 | ${api_revision}.${api_version}.${api_subversion} \ |
60 | -current_version \ |
61 | ${revision}.${patchlevel}.${subversion} \ |
62 | -install_name \$(shrpdir)/\$@" |
63 | ;; |
64 | cygwin*) |
65 | linklibperl="-lperl" |
66 | ;; |
67 | sunos*) |
68 | linklibperl="-lperl" |
69 | ;; |
70 | netbsd*|freebsd[234]*|openbsd*|dragonfly*) |
71 | linklibperl="-L. -lperl" |
72 | ;; |
73 | interix*) |
74 | linklibperl="-L. -lperl" |
75 | shrpldflags="$shrpldflags -Wl,--image-base,0x57000000" |
76 | ;; |
77 | linux*) |
78 | shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib" |
79 | ;; |
80 | aix*) |
81 | shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp" |
82 | case "$osvers" in |
83 | 3*) shrpldflags="$shrpldflags -e _nostart" |
84 | ;; |
85 | *) shrpldflags="$shrpldflags -b noentry" |
86 | ;; |
87 | esac |
88 | shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib" |
89 | linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl" |
90 | ;; |
91 | hpux*) |
92 | linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl" |
93 | ;; |
94 | os390*) |
95 | shrpldflags='-W l,XPLINK,dll' |
96 | linklibperl='libperl.x' |
97 | DPERL_EXTERNAL_GLOB='' |
98 | ;; |
99 | esac |
100 | case "$ldlibpthname" in |
101 | '') ;; |
102 | *) |
103 | case "$osname" in |
104 | os2) |
105 | ldlibpth='' |
106 | ;; |
107 | *) |
108 | eval "ldlibpth=\"$ldlibpthname=`pwd`:\$$ldlibpthname\"" |
109 | ;; |
110 | esac |
111 | # Strip off any trailing :'s |
112 | ldlibpth=`echo $ldlibpth | sed 's/:*$//'` |
113 | ;; |
114 | esac |
115 | |
116 | case "$ldlibpth" in |
117 | # Protect any spaces |
118 | *" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;; |
119 | esac |
120 | |
121 | case "$osname" in |
122 | linux) |
123 | # If there is a pre-existing $libperl from a previous |
124 | # installation, Linux needs to use LD_PRELOAD to |
125 | # override the LD_LIBRARY_PATH setting. See the |
126 | # INSTALL file, under "Building a shared perl library". |
127 | # If there is no pre-existing $libperl, we don't need |
128 | # to do anything further. |
129 | if test -f $archlib/CORE/$libperl; then |
130 | rm -f preload |
131 | cat <<'EOT' > preload |
132 | #! /bin/sh |
133 | lib=$1 |
134 | shift |
135 | test -r $lib && export LD_PRELOAD="$lib $LD_PRELOAD" |
136 | exec "$@" |
137 | EOT |
138 | chmod 755 preload |
139 | ldlibpth="$ldlibpth `pwd`/preload `pwd`/$libperl" |
140 | fi |
141 | ;; |
142 | os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth" |
143 | ;; |
144 | esac |
145 | |
146 | ;; |
147 | |
148 | *) pldlflags='' |
3b333d01 |
149 | static_ldflags='CCCDLFLAGS=' |
8ed6d636 |
150 | ;; |
151 | esac |
152 | |
153 | : Prepare dependency lists for Makefile. |
154 | dynamic_list=' ' |
155 | extra_dep='' |
156 | for f in $dynamic_ext; do |
157 | : the dependency named here will never exist |
158 | base=`echo "$f" | sed 's/.*\///'` |
159 | this_target="lib/auto/$f/$base.$dlext" |
160 | dynamic_list="$dynamic_list $this_target" |
161 | |
162 | : Parallel makes reveal that we have some interdependencies |
163 | case $f in |
164 | Math/BigInt/FastCalc) extra_dep="$extra_dep |
165 | $this_target: lib/auto/List/Util/Util.$dlext" ;; |
166 | Unicode/Normalize) extra_dep="$extra_dep |
167 | $this_target: uni.data" ;; |
168 | esac |
169 | done |
170 | |
171 | static_list=' ' |
172 | for f in $static_ext; do |
173 | base=`echo "$f" | sed 's/.*\///'` |
174 | static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)" |
175 | done |
176 | |
177 | nonxs_list=' ' |
178 | for f in $nonxs_ext; do |
179 | base=`echo "$f" | sed 's/.*\///'` |
180 | nonxs_list="$nonxs_list ext/$f/pm_to_blib" |
181 | done |
182 | |
183 | echo "Extracting $Makefile (with variable substitutions)" |
184 | $spitshell >$Makefile <<!GROK!THIS! |
185 | # $Makefile.SH |
186 | # This file is derived from $Makefile.SH. Any changes made here will |
187 | # be lost the next time you run Configure. |
188 | # $Makefile is used to generate $firstmakefile. The only difference |
189 | # is that $firstmakefile has the dependencies filled in at the end. |
190 | |
191 | CC = $cc |
192 | LD = $ld |
193 | |
194 | LDFLAGS = $ldflags |
195 | CLDFLAGS = $ldflags |
196 | |
197 | mallocsrc = $mallocsrc |
198 | mallocobj = $mallocobj |
199 | madlysrc = $madlysrc |
200 | madlyobj = $madlyobj |
201 | LNS = $lns |
202 | # NOTE: some systems don't grok "cp -f". XXX Configure test needed? |
203 | CPS = $cp |
204 | RMS = rm -f |
205 | ranlib = $ranlib |
206 | |
207 | # The following are mentioned only to make metaconfig include the |
208 | # appropriate questions in Configure. If you want to change these, |
209 | # edit config.sh instead, or specify --man1dir=/wherever on |
210 | # installman commandline. |
211 | bin = $installbin |
212 | scriptdir = $scriptdir |
213 | shrpdir = $archlibexp/CORE |
214 | privlib = $installprivlib |
215 | man1dir = $man1dir |
216 | man1ext = $man1ext |
217 | man3dir = $man3dir |
218 | man3ext = $man3ext |
219 | |
220 | # The following are used to build and install shared libraries for |
221 | # dynamic loading. |
222 | LDDLFLAGS = $lddlflags |
223 | SHRPLDFLAGS = $shrpldflags |
224 | CCDLFLAGS = $ccdlflags |
225 | DLSUFFIX = .$dlext |
226 | PLDLFLAGS = $pldlflags |
227 | LIBPERL = $libperl |
228 | LLIBPERL= $linklibperl |
229 | SHRPENV = $shrpenv |
230 | |
231 | # Static targets are ordinarily built without CCCDLFLAGS. However, |
232 | # if building a shared libperl.so that might later be linked into |
233 | # another application, then it might be appropriate to also build static |
234 | # extensions (usually just DynaLoader) with relocatable code (e.g. -fPIC |
3b333d01 |
235 | # for GNU cc). |
236 | STATIC_LDFLAGS = $static_ldflags |
8ed6d636 |
237 | |
238 | # The following is used to include the current directory in |
239 | # the dynamic loader path you are building a shared libperl. |
240 | LDLIBPTH = $ldlibpth |
241 | |
242 | dynamic_ext = $dynamic_list |
243 | static_ext = $static_list |
244 | nonxs_ext = $nonxs_list |
245 | ext = \$(dynamic_ext) \$(static_ext) \$(nonxs_ext) |
246 | DYNALOADER = DynaLoader\$(OBJ_EXT) |
247 | |
248 | libs = $perllibs $cryptlib |
249 | |
cc69b689 |
250 | public = perl\$(EXE_EXT) utilities translators |
8ed6d636 |
251 | |
252 | shellflags = $shellflags |
253 | |
254 | # This is set to MAKE=$make if your $make command doesn't |
255 | # do it for you. |
256 | $make_set_make |
257 | |
258 | # Mention $gmake here so it gets probed for by Configure. |
259 | |
260 | # These variables may need to be manually set for non-Unix systems. |
261 | AR = $full_ar |
262 | EXE_EXT = $_exe |
263 | LIB_EXT = $_a |
264 | OBJ_EXT = $_o |
265 | PATH_SEP = $p_ |
266 | |
267 | # If you're going to use valgrind and it can't be invoked as plain valgrind |
268 | # then you'll need to change this, or override it on the make command line. |
269 | VALGRIND=valgrind |
270 | |
271 | FIRSTMAKEFILE = $firstmakefile |
272 | |
273 | # Any special object files needed by this architecture, e.g. os2/os2.obj |
274 | ARCHOBJS = $archobjs |
275 | |
276 | .SUFFIXES: .c \$(OBJ_EXT) .i .s |
277 | |
278 | # grrr |
279 | SHELL = $sh |
280 | |
281 | # how to tr(anslate) newlines |
282 | TRNL = '$trnl' |
283 | |
284 | OPTIMIZE = $optimize |
285 | |
286 | EXTRAS = $extras |
287 | |
288 | INSTALLPREFIXEXP = $prefix |
289 | |
290 | !GROK!THIS! |
291 | # not used by Makefile but by installperl; |
292 | # mentioned here so that metaconfig picks these up |
293 | # $installusrbinperl |
294 | # $versiononly |
295 | |
296 | case "${osname}:${osvers}" in |
297 | darwin:*) |
298 | $spitshell >>$Makefile <<EOF |
299 | |
300 | # Your locales are broken (osname $osname, osvers $osvers) |
301 | # and to avoid the numerous |
302 | # perl: warning: Setting locale failed. |
303 | # warnings during the build process we reset the locale variables. |
304 | |
305 | LC_ALL=C |
306 | LANG=C |
307 | LANGUAGE=C |
308 | EOF |
309 | ;; |
310 | esac |
311 | |
312 | $spitshell >>$Makefile <<!GROK!THIS! |
313 | CROSS_NAME = ${CROSS_NAME} |
314 | CROSS_LIB = xlib/${CROSS_NAME} |
315 | |
316 | CCCMD = \`sh \$(shellflags) cflags-cross-${CROSS_NAME} "optimize='\$(OPTIMIZE)'" \$@\` |
317 | |
318 | CCCMDSRC = \`sh \$(shellflags) cflags-cross-${CROSS_NAME} "optimize='\$(OPTIMIZE)'" \$<\` |
319 | |
320 | !GROK!THIS! |
321 | |
322 | ## In the following dollars and backticks do not need the extra backslash. |
323 | $spitshell >>$Makefile <<'!NO!SUBS!' |
324 | |
608969de |
325 | CONFIGPM = xlib/$(CROSS_NAME)/Config.pm |
8ed6d636 |
326 | |
327 | private = preplibrary $(CONFIGPM) $(CROSS_LIB)/Config.pod |
328 | |
329 | shextract = Makefile cflags config.h makeaperl makedepend \ |
330 | makedir myconfig writemain pod/Makefile |
331 | |
332 | # Files to be built with variable substitution after miniperl is |
333 | # available. Dependencies handled manually below (for now). |
334 | |
335 | pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL \ |
336 | pod/pod2usage.PL pod/podchecker.PL pod/podselect.PL |
337 | |
338 | # lib/lib.pm is not listed here because it has a rule of its own. |
339 | plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text \ |
340 | pod/pod2usage pod/podchecker pod/podselect |
341 | |
342 | addedbyconf = UU $(shextract) $(plextract) lib/lib.pm pstruct |
343 | |
344 | # Unicode data files generated by mktables |
345 | unidatafiles = lib/unicore/Canonical.pl lib/unicore/Exact.pl \ |
346 | lib/unicore/Properties lib/unicore/Decomposition.pl \ |
347 | lib/unicore/CombiningClass.pl lib/unicore/Name.pl lib/unicore/PVA.pl |
348 | |
349 | # Directories of Unicode data files generated by mktables |
350 | unidatadirs = lib/unicore/To lib/unicore/lib |
351 | |
352 | h1 = EXTERN.h INTERN.h XSUB.h av.h xconfig.h cop.h cv.h dosish.h |
353 | h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h opcode.h |
354 | h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h |
355 | h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h |
356 | h5 = utf8.h warnings.h |
357 | h = $(h1) $(h2) $(h3) $(h4) $(h5) |
358 | |
359 | c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c |
360 | c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c |
48462a74 |
361 | c3 = taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c |
8ed6d636 |
362 | c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c |
363 | c5 = $(madlysrc) $(mallocsrc) |
364 | |
365 | c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c perlmain.c opmini.c |
366 | |
367 | obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro$(OBJ_EXT) |
368 | obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) perl$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT) |
48462a74 |
369 | obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) |
8ed6d636 |
370 | |
371 | obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS) |
372 | |
373 | lintflags = \ |
374 | -b \ |
375 | -n \ |
376 | -p \ |
377 | -Ncheck=%all \ |
378 | -Nlevel=4 \ |
379 | -errchk=parentheses \ |
380 | -errhdr=%all \ |
381 | -errfmt=src \ |
382 | -errtags \ |
383 | -erroff=E_ASSIGN_NARROW_CONV \ |
384 | -erroff=E_BAD_PTR_CAST \ |
385 | -erroff=E_BAD_PTR_CAST_ALIGN \ |
386 | -erroff=E_BAD_PTR_INT_COMBINATION \ |
387 | -erroff=E_BAD_SIGN_EXTEND \ |
388 | -erroff=E_BLOCK_DECL_UNUSED \ |
389 | -erroff=E_CASE_FALLTHRU \ |
390 | -erroff=E_CONST_EXPR \ |
391 | -erroff=E_CONSTANT_CONDITION \ |
392 | -erroff=E_END_OF_LOOP_CODE_NOT_REACHED \ |
393 | -erroff=E_EQUALITY_NOT_ASSIGNMENT \ |
394 | -erroff=E_EXPR_NULL_EFFECT \ |
395 | -erroff=E_FALSE_LOGICAL_EXPR \ |
396 | -erroff=E_INCL_NUSD \ |
397 | -erroff=E_LOOP_EMPTY \ |
398 | -erroff=E_MAIN_PARAM \ |
399 | -erroff=E_POINTER_TO_OBJECT \ |
400 | -erroff=E_PTRDIFF_OVERFLOW \ |
401 | -erroff=E_SHIFT_CNT_NEG_TOO_BIG_L \ |
402 | -erroff=E_STATIC_UNUSED \ |
403 | -erroff=E_TRUE_LOGICAL_EXPR |
404 | |
405 | splintflags = \ |
406 | -I/usr/lib/gcc/i486-linux-gnu/4.0.2/include/ \ |
407 | -D__builtin_va_list=va_list \ |
408 | -Dsigjmp_buf=jmp_buf \ |
409 | -warnposix \ |
410 | \ |
411 | +boolint \ |
412 | +charintliteral \ |
413 | -fixedformalarray \ |
414 | -mustfreefresh \ |
415 | -nestedextern \ |
416 | -predboolint \ |
417 | -predboolothers \ |
418 | -preproc \ |
419 | -boolops \ |
420 | -shadow \ |
421 | -nullstate \ |
422 | +longintegral \ |
423 | +matchanyintegral \ |
424 | -type \ |
425 | \ |
426 | +line-len 999 \ |
427 | +weak |
428 | |
429 | splintfiles = $(c1) |
430 | |
431 | .c$(OBJ_EXT): |
432 | $(CCCMD) -I$(CROSS_LIB) $(PLDLFLAGS) $*.c |
433 | |
434 | .c.i: |
435 | $(CCCMDSRC) -E $*.c > $*.i |
436 | |
437 | .c.s: |
438 | $(CCCMDSRC) -S $*.c |
439 | |
440 | all: $(FIRSTMAKEFILE) miniperl$(EXE_EXT) extra.pods $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make |
441 | @echo " "; |
442 | @echo " Everything is up to date. Type '$(MAKE) test' to run test suite." |
443 | |
444 | .PHONY: all |
445 | |
446 | |
447 | # This is now done by installman only if you actually want the man pages. |
448 | # @echo " "; echo " Making docs"; cd pod; $(MAKE) all; |
449 | |
450 | # Phony target to force checking subdirectories. |
451 | # Apparently some makes require an action for the FORCE target. |
452 | .PHONY: FORCE |
453 | FORCE: |
454 | @sh -c true |
455 | !NO!SUBS! |
456 | $spitshell >>$Makefile <<!GROK!THIS! |
457 | |
458 | # We do a copy of the op.c instead of a symlink because gcc gets huffy |
459 | # if we have a symlink forest to another disk (it complains about too many |
460 | # levels of symbolic links, even if we have only two) |
461 | |
462 | opmini.c: op.c |
463 | \$(RMS) opmini.c |
464 | \$(CPS) op.c opmini.c |
465 | |
466 | opmini\$(OBJ_EXT): opmini.c |
467 | \$(CCCMD) \$(PLDLFLAGS) $DPERL_EXTERNAL_GLOB opmini.c |
468 | |
469 | globals\$(OBJ_EXT): |
470 | |
471 | !GROK!THIS! |
472 | $spitshell >>$Makefile <<'!NO!SUBS!' |
473 | miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h |
474 | $(CCCMD) $(PLDLFLAGS) $*.c |
475 | |
476 | perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE) |
477 | sh writemain $(DYNALOADER) $(static_ext) > perlmain.c |
478 | |
479 | !NO!SUBS! |
480 | case "$osname" in |
481 | cygwin) |
482 | ;; # Let cygwin/Makefile.SHs do its work. |
483 | *) |
484 | $spitshell >>$Makefile <<'!NO!SUBS!' |
485 | perlmain$(OBJ_EXT): perlmain.c |
486 | $(CCCMD) $(PLDLFLAGS) $*.c |
487 | |
488 | !NO!SUBS! |
489 | ;; |
490 | esac |
491 | $spitshell >>$Makefile <<'!NO!SUBS!' |
492 | # The file ext.libs is a list of libraries that must be linked in |
493 | # for static extensions, e.g. -lm -lgdbm, etc. The individual |
494 | # static extension Makefile's add to it. |
495 | ext.libs: $(static_ext) |
496 | -@test -f ext.libs || touch ext.libs |
497 | |
498 | !NO!SUBS! |
499 | |
500 | # How to build libperl. This is still rather convoluted. |
501 | # Load up custom Makefile.SH fragment for shared loading and executables: |
502 | case "$osname" in |
503 | *) |
504 | Makefile_s="$osname/Makefile.SHs" |
505 | ;; |
506 | esac |
507 | |
508 | case "$osname" in |
509 | aix) |
510 | $spitshell >>$Makefile <<!GROK!THIS! |
511 | LIBS = $perllibs |
512 | # In AIX we need to change this for building Perl itself from |
513 | # its earlier definition (which is for building external |
514 | # extensions *after* Perl has been built and installed) |
515 | CCDLFLAGS = `echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'` |
516 | |
517 | !GROK!THIS! |
518 | case "$useshrplib" in |
519 | define|true|[yY]*) |
520 | $spitshell >>$Makefile <<'!NO!SUBS!' |
521 | |
522 | LIBPERL_NONSHR = libperl_nonshr$(LIB_EXT) |
523 | MINIPERL_NONSHR = miniperl_nonshr$(EXE_EXT) |
524 | |
525 | $(LIBPERL_NONSHR): $(obj) |
526 | $(RMS) $(LIBPERL_NONSHR) |
527 | $(AR) rcu $(LIBPERL_NONSHR) $(obj) |
528 | |
529 | $(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) |
530 | $(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \ |
531 | opmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS) |
532 | |
533 | MINIPERLEXP = $(MINIPERL_NONSHR) |
534 | |
535 | LIBPERLEXPORT = perl.exp |
536 | |
537 | !NO!SUBS! |
538 | |
539 | ;; |
540 | *) |
541 | $spitshell >>$Makefile <<'!NO!SUBS!' |
542 | MINIPERLEXP = miniperl$(EXE_EXT) |
543 | |
544 | PERLEXPORT = perl.exp |
545 | |
546 | !NO!SUBS! |
547 | ;; |
548 | esac |
549 | $spitshell >>$Makefile <<'!NO!SUBS!' |
550 | perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) |
551 | ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp |
552 | |
553 | !NO!SUBS! |
554 | ;; |
555 | os2) |
556 | $spitshell >>$Makefile <<'!NO!SUBS!' |
557 | MINIPERLEXP = miniperl |
558 | |
559 | perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map |
560 | ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def |
561 | |
562 | !NO!SUBS! |
563 | ;; |
564 | esac |
565 | |
566 | if test -r $Makefile_s ; then |
567 | . $Makefile_s |
568 | $spitshell >>$Makefile <<!GROK!THIS! |
569 | |
570 | $Makefile: $Makefile_s |
571 | !GROK!THIS! |
572 | else |
573 | $spitshell >>$Makefile <<'!NO!SUBS!' |
574 | $(LIBPERL): $& $(obj) $(DYNALOADER) $(LIBPERLEXPORT) |
575 | !NO!SUBS! |
576 | case "$useshrplib" in |
577 | true) |
578 | $spitshell >>$Makefile <<'!NO!SUBS!' |
579 | rm -f $@ |
580 | $(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs) |
581 | !NO!SUBS! |
582 | case "$osname" in |
583 | aix) |
584 | $spitshell >>$Makefile <<'!NO!SUBS!' |
585 | rm -f libperl$(OBJ_EXT) |
586 | mv $@ libperl$(OBJ_EXT) |
587 | $(AR) qv $(LIBPERL) libperl$(OBJ_EXT) |
588 | !NO!SUBS! |
589 | ;; |
590 | esac |
591 | ;; |
592 | *) |
593 | $spitshell >>$Makefile <<'!NO!SUBS!' |
594 | rm -f $(LIBPERL) |
595 | $(AR) rcu $(LIBPERL) $(obj) $(DYNALOADER) |
596 | @$(ranlib) $(LIBPERL) |
597 | !NO!SUBS! |
598 | ;; |
599 | esac |
600 | $spitshell >>$Makefile <<'!NO!SUBS!' |
601 | |
602 | # How to build executables. |
603 | |
604 | # The $& notation tells Sequent machines that it can do a parallel make, |
605 | # and is harmless otherwise. |
606 | # The miniperl -w -MExporter line is a basic cheap test to catch errors |
607 | # before make goes on to run preplibrary and then MakeMaker on extensions. |
608 | # This is very handy because later errors are often caused by miniperl |
609 | # build problems but that's not obvious to the novice. |
610 | # The Module used here must not depend on Config or any extensions. |
611 | |
612 | !NO!SUBS! |
613 | |
614 | |
615 | $spitshell >>$Makefile <<'!NO!SUBS!' |
616 | |
617 | perl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) |
618 | -@rm -f miniperl.xok |
619 | $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX)dyn$(EXE_EXT) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
620 | $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX)$(EXE_EXT) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
621 | |
622 | # Purify/Quantify Perls. |
623 | |
624 | pureperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) |
625 | $(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
626 | |
627 | purecovperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) |
628 | $(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
629 | |
630 | quantperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) |
631 | $(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
632 | |
633 | # Valgrind perl (currently Linux only) |
634 | |
635 | perl.valgrind.config: config.sh |
636 | @echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..." |
637 | @$(MAKE) perl.config.dashg |
638 | @echo "Checking usemymalloc='n' in config.sh..." |
639 | @grep "^usemymalloc=" config.sh |
640 | @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 |
641 | @echo "And of course you have to have valgrind..." |
642 | $(VALGRIND) ./perl -e 1 2>/dev/null || exit 1 |
643 | |
644 | # Third Degree Perl (Tru64 only) |
645 | |
646 | perl.config.dashg: |
647 | @echo "Checking optimize='-g' in config.sh..." |
648 | @grep "^optimize=" config.sh |
649 | @egrep "^optimize='(.*-g.*)'" config.sh >/dev/null || exit 1 |
650 | |
651 | perl.third.config: config.sh |
652 | @echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..." |
653 | @$(MAKE) perl.config.dashg |
654 | @echo "Checking usemymalloc='n' in config.sh..." |
655 | @grep "^usemymalloc=" config.sh |
656 | @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 |
657 | |
658 | perl.third: /usr/bin/atom perl.third.config perl |
659 | atom -tool third -L. -all -gp -toolargs="-invalid -uninit heap+stack+copy -min 0" perl |
660 | @echo "Now you may run perl.third and then study perl.3log." |
661 | |
662 | # Pixie Perls (Tru64 and IRIX only) |
663 | |
664 | perl.pixie.config: config.sh |
665 | @echo "To build perl.pixie you must Configure -Doptimize=-g, checking..." |
666 | @$(MAKE) perl.config.dashg |
667 | |
668 | perl.pixie.atom: /usr/bin/atom perl |
669 | atom -tool pixie -L. -all -toolargs="-quiet" perl |
670 | |
671 | perl.pixie.irix: perl |
672 | pixie perl |
673 | |
674 | perl.pixie: /usr/bin/pixie perl.pixie.config perl |
675 | if test -x /usr/bin/atom; then \ |
676 | $(MAKE) perl.pixie.atom; \ |
677 | else \ |
678 | $(MAKE) perl.pixie.irix; \ |
679 | fi |
680 | @echo "Now you may run perl.pixie and then run pixie." |
681 | |
682 | # Gprof Perl |
683 | |
684 | perl.config.dashpg: |
685 | @echo "Checking optimize='-pg' in config.sh..." |
686 | @grep "^optimize=" config.sh |
687 | @grep "^optimize='.*-pg.*'" config.sh >/dev/null || exit 1 |
688 | |
689 | perl.gprof.config: config.sh |
690 | @echo "To build perl.gprof you must Configure -Doptimize=-pg, checking..." |
691 | @$(MAKE) perl.config.dashpg |
692 | |
693 | perl.gprof: /usr/bin/gprof perl.gprof.config |
694 | @-rm -f perl |
695 | $(MAKE) PERL_SUFFIX=.gprof PERL_PROFILE_LDFLAGS=-pg perl |
696 | @echo "Now you may run perl.gprof and then run gprof perl.gprof." |
697 | |
698 | # Gcov Perl |
699 | |
700 | perl.config.gcov: |
701 | @echo "To build perl.gcov you must use gcc 3.0 or newer, checking..." |
702 | @echo "Checking gccversion in config.sh..." |
703 | @grep "^gccversion=" config.sh |
704 | @grep "^gccversion='[3-9]\." config.sh >/dev/null || exit 1 |
705 | @echo "To build perl.gcov you must Configure -Dccflags=-fprofile-arcs -ftest-coverage, checking..." |
706 | @echo "Checking ccflags='-fprofile-arcs -ftest-coverage' in config.sh..." |
707 | @grep "^ccflags=" config.sh |
708 | @grep "^ccflags='.*-fprofile-arcs -ftest-coverage.*'" config.sh >/dev/null || exit 1 |
709 | |
710 | perl.gcov: perl.config.gcov |
711 | @-rm -f perl |
712 | $(MAKE) PERL_SUFFIX=.gcov PERL_PROFILE_LDFLAGS='' perl |
713 | @echo "Now you may run perl.gcov and then run gcov some.c." |
714 | |
715 | # Microperl. This is just a convenience thing if one happens to |
716 | # build also the full Perl and therefore the real big Makefile: |
717 | # usually one should manually explicitly issue the below command. |
718 | |
719 | .PHONY: microperl |
720 | microperl: |
721 | $(MAKE) -f Makefile.micro |
722 | |
8ed6d636 |
723 | !NO!SUBS! |
724 | |
725 | fi |
726 | |
727 | $spitshell >>$Makefile <<'!NO!SUBS!' |
728 | |
8ed6d636 |
729 | .PHONY: preplibrary |
ebca06e9 |
730 | preplibrary: miniperl $(CONFIGPM) lib/lib.pm lib/re.pm $(PREPLIBRARY_LIBPERL) |
8ed6d636 |
731 | |
732 | .PHONY: makeppport |
733 | makeppport: miniperl$(EXE_EXT) $(CONFIGPM) |
734 | $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib mkppport |
735 | |
736 | $(CROSS_LIB)/Config.pod: config.sh miniperl configpm Porting/Glossary |
608969de |
737 | $(LDLIBPTH) ./miniperl -Ilib configpm --cross=$(CROSS_NAME) |
738 | cp *.h $(CROSS_LIB)/ |
739 | cp ext/re/re.pm $(LIBDIR)/ |
740 | |
741 | $(CONFIGPM): $(CROSS_LIB)/Config.pod xconfig.h |
8ed6d636 |
742 | |
743 | lib/re.pm: ext/re/re.pm |
744 | @-rm -f $@ |
745 | cp ext/re/re.pm lib/re.pm |
746 | |
747 | $(plextract): miniperl $(CONFIGPM) x2p/s2p |
748 | @-rm -f $@ |
749 | $(LDLIBPTH) ./miniperl -I`pwd`/lib $@.PL |
750 | |
751 | lib/lib.pm: miniperl $(CONFIGPM) |
752 | @-rm -f $@ |
753 | $(LDLIBPTH) ./miniperl -Ilib -MCross lib/lib_pm.PL |
754 | |
755 | unidatafiles $(unidatafiles): uni.data |
756 | |
757 | uni.data: miniperl$(EXE_EXT) $(CONFIGPM) lib/unicore/mktables |
758 | cd lib/unicore && $(LDLIBPTH) ../../miniperl -I../../lib mktables -w |
759 | touch uni.data |
760 | |
761 | extra.pods: miniperl |
762 | -@test ! -f extra.pods || rm -f `cat extra.pods` |
763 | -@rm -f extra.pods |
764 | -@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \ |
765 | nx=`echo $$x | sed -e "s/README\.//"`; \ |
766 | cd pod ; $(LNS) ../$$x "perl"$$nx".pod" ; cd .. ; \ |
767 | echo "pod/perl"$$nx".pod" >> extra.pods ; \ |
768 | done |
769 | -@rm -f pod/perlvms.pod |
770 | -@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods |
771 | -@rm -f pod/perldelta.pod |
4d7c7898 |
772 | -@test -f pod/perl5100delta.pod && cd pod && $(LNS) perl5100delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc |
8ed6d636 |
773 | |
774 | extras.make: perl$(EXE_EXT) |
775 | -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst` |
776 | |
777 | extras.test: perl$(EXE_EXT) |
778 | -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst` |
779 | |
780 | extras.install: perl$(EXE_EXT) |
781 | -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst` |
782 | |
783 | .PHONY: install install-strip install-all install-verbose install-silent \ |
784 | no-install install.perl install.man install.html |
785 | |
786 | META.yml: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm |
787 | $(LDLIBPTH) ./miniperl -Ilib Porting/makemeta |
788 | |
789 | install-strip: |
790 | $(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)" |
791 | |
792 | install install-all: |
793 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)" |
794 | |
795 | install-verbose: |
796 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)" |
797 | |
798 | install-silent: |
799 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)" |
800 | |
801 | no-install: |
802 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)" |
803 | |
804 | # Set this to an empty string to avoid an attempt of rebuild before install |
805 | INSTALL_DEPENDENCE = all |
806 | |
807 | install.perl: $(INSTALL_DEPENDENCE) installperl |
808 | $(LDLIBPTH) ./perl installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS) |
809 | -@test ! -s extras.lst || $(MAKE) extras.install |
810 | |
811 | install.man: all installman |
812 | $(LDLIBPTH) ./perl installman --destdir=$(DESTDIR) $(INSTALLFLAGS) |
813 | |
814 | # XXX Experimental. Hardwired values, but useful for testing. |
815 | # Eventually Configure could ask for some of these values. |
816 | install.html: all installhtml |
817 | -@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd .. |
818 | $(LDLIBPTH) ./perl installhtml \ |
819 | --podroot=. --podpath=. --recurse \ |
820 | --htmldir=$(privlib)/html \ |
821 | --htmlroot=$(privlib)/html \ |
822 | --splithead=pod/perlipc \ |
823 | --splititem=pod/perlfunc \ |
824 | --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \ |
825 | --ignore=Porting/Maintainers.pm,Porting/patching.pod,Porting/pumpkin.pod,Porting/repository.pod \ |
826 | --verbose |
827 | |
828 | |
829 | # I now supply perly.c with the kits, so the following section is |
830 | # used only if you force bison to run by saying |
831 | # make regen_perly |
832 | # You normally shouldn't remake perly.[ch]. |
833 | |
834 | .PHONY: regen_perly |
835 | |
836 | run_byacc: |
837 | @echo "run_byacc is obsolete; try 'make regen_perly' instead" |
838 | |
839 | # this outputs perly.h, perly.act and perly.tab |
840 | regen_perly: |
841 | perl regen_perly.pl |
842 | |
843 | # We don't want to regenerate perly.c and perly.h, but they might |
844 | # appear out-of-date after a patch is applied or a new distribution is |
845 | # made. |
846 | perly.c: perly.y |
847 | -@sh -c true |
848 | |
849 | perly.h: perly.y |
850 | -@sh -c true |
851 | |
852 | # No compat3.sym here since and including the 5.004_50. |
853 | # No interp.sym since 5.005_03. |
854 | SYM = global.sym globvar.sym perlio.sym pp.sym |
855 | |
856 | SYMH = perlvars.h intrpvar.h |
857 | |
858 | CHMOD_W = chmod +w |
859 | |
860 | # The following files are generated automatically |
8ed6d636 |
861 | # embed.pl: proto.h embed.h embedvar.h global.sym |
862 | # perlapi.h perlapi.c |
863 | # [* embed.pl needs pp.sym generated by opcode.pl! *] |
864 | # keywords.pl: keywords.h |
865 | # opcode.pl: opcode.h opnames.h pp_proto.h pp.sym |
866 | # regcomp.pl: regnodes.h |
867 | # warnings.pl: warnings.h lib/warnings.pm |
868 | # The correct versions should be already supplied with the perl kit, |
869 | # in case you don't have perl available. |
870 | # To force them to be regenerated, run |
871 | # perl regen.pl |
872 | # with your existing copy of perl |
873 | # (make regen_headers is kept for backwards compatibility) |
874 | |
875 | AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \ |
876 | embed.h embedvar.h global.sym \ |
8ed6d636 |
877 | perlapi.h perlapi.c regnodes.h \ |
878 | warnings.h lib/warnings.pm |
879 | |
1e2f36ef |
880 | .PHONY: regen_headers regen_all |
8ed6d636 |
881 | |
882 | regen regen_headers: FORCE |
883 | -perl regen.pl |
884 | |
1e2f36ef |
885 | regen_all: regen |
8ed6d636 |
886 | |
887 | .PHONY: manisort manicheck |
888 | |
889 | manisort: FORCE |
890 | LC_ALL=C sort -fdc MANIFEST || (echo "WARNING: re-sorting MANIFEST"; \ |
891 | LC_ALL=C sort -fdo MANIFEST MANIFEST) |
892 | |
893 | manicheck: FORCE |
894 | perl Porting/manicheck |
895 | |
896 | # Extensions: |
897 | # Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will |
898 | # automatically get built. There should ordinarily be no need to change |
899 | # any of this part of makefile. |
900 | # |
901 | # The dummy dependency is a place holder in case $(dynamic_ext) or |
902 | # $(static_ext) is empty. |
903 | # |
904 | # DynaLoader may be needed for extensions that use Makefile.PL. |
905 | |
906 | ###$(DYNALOADER).c: $(EXTDIR)/DynaLoader/dl_dld.xs $(CONFIGPM) |
907 | ### if not exist $(AUTODIR) mkdir $(AUTODIR) |
908 | ### cd $(EXTDIR)\$(*B) |
909 | ### $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) $(*B)_pm.PL |
910 | ### $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) XSLoader_pm.PL |
911 | ### cd ..\..\win32 |
912 | ### $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) |
913 | ### $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) |
914 | ### cd $(EXTDIR)\$(*B) |
915 | ### $(XSUBPP) dl_win32.xs > $(*B).c |
916 | ### cd ..\..\win32 |
917 | ### |
918 | ###$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs |
919 | ### $(COPY) dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs |
920 | |
921 | |
922 | |
923 | $(DYNALOADER): preplibrary FORCE |
3b333d01 |
924 | @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS) |
8ed6d636 |
925 | |
926 | d_dummy $(dynamic_ext): miniperl$(EXE_EXT) preplibrary makeppport $(DYNALOADER) FORCE |
3b333d01 |
927 | @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic |
8ed6d636 |
928 | |
929 | s_dummy $(static_ext): miniperl$(EXE_EXT) preplibrary makeppport $(DYNALOADER) FORCE |
3b333d01 |
930 | @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS) |
8ed6d636 |
931 | |
932 | n_dummy $(nonxs_ext): miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE |
3b333d01 |
933 | @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) |
8ed6d636 |
934 | !NO!SUBS! |
935 | |
936 | $spitshell >>$Makefile <<EOF |
937 | $extra_dep |
938 | EOF |
939 | |
940 | $spitshell >>$Makefile <<'!NO!SUBS!' |
941 | |
942 | .PHONY: printconfig |
943 | printconfig: |
944 | @eval `$(LDLIBPTH) ./perl -Ilib -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR) |
945 | |
946 | .PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \ |
947 | realclean _realcleaner clobber _clobber \ |
6e2cec71 |
948 | distclean veryclean _verycleaner |
8ed6d636 |
949 | |
6e2cec71 |
950 | clean: _tidy _mopup |
8ed6d636 |
951 | |
6e2cec71 |
952 | realclean: _realcleaner _mopup |
8ed6d636 |
953 | @echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh" |
954 | |
955 | _clobber: |
956 | -@rm -f Cross/run-* Cross/to-* Cross/from-* |
957 | rm -f config.sh cppstdin Policy.sh extras.lst |
958 | |
6e2cec71 |
959 | clobber: _realcleaner _mopup _clobber |
8ed6d636 |
960 | |
961 | distclean: clobber |
962 | |
963 | # Like distclean but also removes emacs backups and *.orig. |
964 | veryclean: _verycleaner _mopup _clobber |
965 | -@rm -f Obsolete Wanted |
966 | |
967 | # Do not 'make _mopup' directly. |
968 | _mopup: |
969 | rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c uudmap.h generate_uudmap$(EXE_EXT) |
970 | -rmdir .depending |
971 | -@test -f extra.pods && rm -f `cat extra.pods` |
972 | -@test -f vms/README_vms.pod && rm -f vms/README_vms.pod |
973 | -rm -f perl.exp ext.libs extra.pods uni.data opmini.o |
974 | -rm -f perl.export perl.dll perl.libexp perl.map perl.def |
975 | -rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap |
976 | -rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log |
977 | -rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs |
978 | -rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok |
ce0286c6 |
979 | -rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump |
cc69b689 |
980 | -rm -f perl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl |
8ed6d636 |
981 | -rm -f opcode.h-old opnames.h-old pp.sym-old pp_proto.h-old |
982 | -rm -f config.over |
983 | |
984 | # Do not 'make _tidy' directly. |
985 | _tidy: |
986 | -cd pod; $(LDLIBPTH) $(MAKE) clean |
987 | -cd utils; $(LDLIBPTH) $(MAKE) clean |
988 | -cd x2p; $(LDLIBPTH) $(MAKE) clean |
989 | -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ |
3b333d01 |
990 | $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --target=clean $$x MAKE=$(MAKE) ; \ |
8ed6d636 |
991 | done |
992 | |
993 | _cleaner1: |
994 | -cd os2; rm -f Makefile |
995 | -cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN) |
996 | -cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN) |
997 | -cd x2p; $(LDLIBPTH) $(MAKE) $(CLEAN) |
3b333d01 |
998 | -@if test -f miniperl$(EXE_EXT) ; then \ |
999 | for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ |
1000 | $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --target=$(CLEAN) $$x MAKE=$(MAKE) ; \ |
1001 | done ; \ |
1002 | else \ |
1003 | sh $(CLEAN).sh ; \ |
1004 | fi |
1005 | rm -f realclean.sh veryclean.sh |
8ed6d636 |
1006 | -@test ! -f ./miniperl$(EXE_EXT) || $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib mkppport --clean |
1007 | |
1008 | # Some systems do not support "?", so keep these files separate. |
1009 | _cleaner2: |
1010 | -rm -f core.*perl.*.? t/core.perl.*.? .?*.c |
1011 | rm -f core *perl.core t/core t/*perl.core core.* t/core.* |
1012 | rm -f t/misctmp* t/forktmp* t/tmp* t/c t/perl$(EXE_EXT) t/rantests |
1013 | rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR) |
1014 | rm -rf $(addedbyconf) |
1015 | rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old |
1016 | rm -f $(private) |
1017 | rm -rf $(unidatafiles) $(unidatadirs) |
1018 | rm -rf lib/auto |
1019 | rm -f lib/.exists lib/*/.exists lib/*/*/.exists |
1020 | rm -f h2ph.man pstruct |
1021 | rm -rf .config |
1022 | rm -f preload |
1023 | rm -rf lib/Encode lib/Compress lib/Hash lib/re |
1024 | rm -rf lib/IO/Compress lib/IO/Uncompress |
1025 | rm -f lib/ExtUtils/ParseXS/t/XSTest.c |
1026 | rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT) |
1027 | rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX) |
1028 | -rmdir lib/B lib/Data |
1029 | -rmdir lib/Filter/Util lib/IO/Socket |
1030 | -rmdir lib/List lib/MIME lib/Scalar lib/Sys |
1031 | -rmdir lib/threads lib/XS |
1032 | |
1033 | _realcleaner: |
1034 | @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean |
1035 | @$(LDLIBPTH) $(MAKE) _cleaner2 |
1036 | |
1037 | _verycleaner: |
1038 | @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=veryclean |
1039 | @$(LDLIBPTH) $(MAKE) _cleaner2 |
1040 | -rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig |
1041 | |
1042 | .PHONY: lint |
1043 | lint: $(c) |
1044 | rm -f *.ln |
1045 | lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c) |
1046 | |
1047 | .PHONY: splint |
1048 | splint: $(c) |
1049 | splint $(splintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(splintfiles) |
1050 | |
1051 | # Need to unset during recursion to go out of loop. |
1052 | # The README below ensures that the dependency list is never empty and |
1053 | # that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding. |
1054 | |
1055 | MAKEDEPEND = Makefile makedepend |
1056 | |
1057 | $(FIRSTMAKEFILE): README $(MAKEDEPEND) |
1058 | $(MAKE) depend MAKEDEPEND= |
1059 | |
1060 | config.h: config_h.SH config.sh |
1061 | $(SHELL) config_h.SH |
1062 | # TODO - improve following line |
1063 | cp config.h $(CROSS_LIB)/ |
1064 | |
1065 | xconfig.h: config_h.SH Cross/config-$(CROSS_NAME).sh |
1066 | CONFIG_SH=Cross/config-$(CROSS_NAME).sh CONFIG_H=xconfig.h $(SHELL) config_h.SH |
608969de |
1067 | #TODO $(LDLIBPTH) ./miniperl -Ilib -MCross=$(CROSS_NAME) config_h.PL "INST_VER=$(INST_VER)" "CORE_DIR=$(CROSS_LIB)" "CONFIG_H=xconfig.h" |
8ed6d636 |
1068 | cp xconfig.h $(CROSS_LIB)/ |
608969de |
1069 | cp xconfig.h $(CROSS_LIB)/config.h |
8ed6d636 |
1070 | |
1071 | # When done, touch perlmain.c so that it doesn't get remade each time. |
1072 | .PHONY: depend |
1073 | depend: makedepend |
1074 | sh ./makedepend MAKE=$(MAKE) |
1075 | - test -s perlmain.c && touch perlmain.c |
1076 | cd x2p; $(MAKE) depend |
1077 | |
1078 | # Cannot postpone this until $firstmakefile is ready ;-) |
1079 | makedepend: makedepend.SH config.sh |
1080 | sh ./makedepend.SH |
1081 | |
1082 | .PHONY: test check test_prep test_prep_nodll test_prep_pre _test_prep \ |
1083 | test_tty test-tty _test_tty test_notty test-notty _test_notty \ |
1084 | utest ucheck test.utf8 check.utf8 test.torture torturetest \ |
1085 | test.utf16 check.utf16 utest.utf16 ucheck.utf16 \ |
1086 | test.third check.third utest.third ucheck.third test_notty.third \ |
1087 | test.deparse test_notty.deparse test_harness test_harness_notty \ |
1088 | minitest coretest test.taintwarn |
1089 | |
1090 | # Cannot delegate rebuilding of t/perl to make |
1091 | # to allow interlaced test and minitest |
1092 | |
1093 | TESTFILE=TEST |
1094 | |
6e2cec71 |
1095 | _test_prep: |
8ed6d636 |
1096 | cd t && (rm -f $(PERL)$(EXE_EXT); $(LNS) ../$(PERL)$(EXE_EXT) $(PERL)$(EXE_EXT)) |
1097 | |
1098 | # Architecture-neutral stuff: |
1099 | |
1100 | test_prep_pre: preplibrary utilities $(nonxs_ext) |
1101 | |
1102 | test_prep: test_prep_pre miniperl$(EXE_EXT) $(unidatafiles) perl$(EXE_EXT) $(dynamic_ext) $(TEST_PERL_DLL) |
1103 | PERL=./perl $(MAKE) _test_prep |
1104 | |
1105 | _test_tty: |
1106 | cd t && $(PERL_DEBUG) $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) </dev/tty |
1107 | |
1108 | _test_notty: |
1109 | cd t && $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) |
1110 | |
8ed6d636 |
1111 | # The second branch is for testing without a tty or controlling terminal, |
1112 | # see t/op/stat.t |
1113 | _test: |
1114 | if (true </dev/tty) >/dev/null 2>&1; then \ |
1115 | $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_tty ; \ |
1116 | else \ |
1117 | $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_notty ; \ |
1118 | fi |
1119 | @echo "Ran tests" > t/rantests |
1120 | |
1121 | test check: test_prep |
1122 | PERL=./perl $(MAKE) _test |
1123 | |
1124 | test_tty: test_prep |
1125 | PERL=./perl $(MAKE) _test_tty |
1126 | |
1127 | test_notty: test_prep |
1128 | PERL=./perl $(MAKE) _test_notty |
1129 | |
1130 | utest ucheck test.utf8 check.utf8: test_prep |
1131 | PERL=./perl TEST_ARGS=-utf8 $(MAKE) _test |
1132 | |
1133 | coretest: test_prep |
1134 | PERL=./perl TEST_ARGS=-core $(MAKE) _test |
1135 | |
1136 | test-prep: test_prep |
1137 | |
1138 | test-tty: test_tty |
1139 | |
1140 | test-notty: test_notty |
1141 | |
1142 | # Torture testing |
1143 | |
1144 | test.torture torturetest: test_prep |
1145 | PERL=./perl TEST_ARGS=-torture $(MAKE) _test |
1146 | |
1147 | # Targets for UTF16 testing: |
1148 | |
1149 | minitest.utf16: minitest.prep |
1150 | - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \ |
1151 | && $(LDLIBPTH) ./perl TEST -minitest -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty |
1152 | |
1153 | test.utf16 check.utf16: test_prep |
1154 | PERL=./perl $(MAKE) TEST_ARGS=-utf16 _test |
1155 | |
1156 | utest.utf16 ucheck.utf16: test_prep |
1157 | PERL=./perl $(MAKE) TEST_ARGS="-utf8 -utf16" _test |
1158 | |
1159 | # Targets for valgrind testing: |
1160 | |
1161 | test_prep.valgrind: test_prep perl.valgrind |
1162 | PERL=./perl $(MAKE) _test_prep |
1163 | |
1164 | test.valgrind check.valgrind: test_prep perl.valgrind.config |
1165 | PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(MAKE) _test |
1166 | |
1167 | utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind.config |
1168 | PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 TEST_ARGS=-utf8 $(MAKE) _test |
1169 | |
1170 | test_notty.valgrind: test_prep.valgrind perl.valgrind.config |
1171 | PERL=./perl $(MAKE) PERL_DEBUG=PERL_VALGRIND=1 _test_notty |
1172 | |
1173 | # Targets for Third Degree testing. |
1174 | |
1175 | test_prep.third: test_prep perl.third |
1176 | PERL=./perl.third $(MAKE) _test_prep |
1177 | |
1178 | test.third check.third: test_prep.third perl.third |
1179 | PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 $(MAKE) _test |
1180 | |
1181 | utest.third ucheck.third: test_prep.third perl.third |
1182 | PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 TEST_ARGS=-utf8 $(MAKE) _test |
1183 | |
1184 | test_notty.third: test_prep.third perl.third |
1185 | PERL=./perl.third $(MAKE) PERL_DEBUG=PERL_3LOG=1 _test_notty |
1186 | |
1187 | # Targets for Deparse testing. |
1188 | |
1189 | test.deparse: test_prep |
1190 | PERL=./perl TEST_ARGS=-deparse $(MAKE) _test |
1191 | |
1192 | test_notty.deparse: test_prep |
1193 | PERL=./perl TEST_ARGS=-deparse $(MAKE) _test_notty |
1194 | |
1195 | # Targets to run the test suite with -t |
1196 | |
1197 | test.taintwarn: test_prep |
1198 | PERL=./perl TEST_ARGS=-taintwarn $(MAKE) _test |
1199 | |
1200 | minitest.prep: |
1201 | -@test -f lib/lib.pm && test -f lib/Config.pm || \ |
1202 | $(MAKE) lib/Config.pm lib/lib.pm $(unidatafiles) |
1203 | @echo " " |
1204 | @echo "You may see some irrelevant test failures if you have been unable" |
1205 | @echo "to build lib/Config.pm, lib/lib.pm or the Unicode data files." |
1206 | @echo " " |
1207 | |
1208 | # Can't depend on lib/Config.pm because that might be where miniperl |
1209 | # is crashing. |
1210 | minitest: miniperl$(EXE_EXT) lib/re.pm minitest.prep |
1211 | - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \ |
1212 | && $(LDLIBPTH) ./perl TEST -minitest base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty |
1213 | |
1214 | # Test via harness |
1215 | |
1216 | test_harness: test_prep |
1217 | PERL=./perl $(MAKE) TESTFILE=harness _test |
1218 | |
1219 | test_harness_notty: test_prep |
1220 | PERL=./perl HARNESS_NOTTY=1 $(MAKE) TESTFILE=harness _test |
1221 | |
1222 | # Handy way to run perlbug -ok without having to install and run the |
1223 | # installed perlbug. We don't re-run the tests here - we trust the user. |
1224 | # Please *don't* use this unless all tests pass. |
1225 | # If you want to report test failures, use "make nok" instead. |
1226 | |
1227 | .PHONY: ok okfile oknack okfilenack nok nokfile noknack nokfilenack |
1228 | |
1229 | ok: utilities |
1230 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' |
1231 | |
1232 | okfile: utilities |
1233 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok |
1234 | |
1235 | oknack: utilities |
1236 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A |
1237 | |
1238 | okfilenack: utilities |
1239 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A |
1240 | |
1241 | nok: utilities |
1242 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' |
1243 | |
1244 | nokfile: utilities |
1245 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok |
1246 | |
1247 | noknack: utilities |
1248 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A |
1249 | |
1250 | nokfilenack: utilities |
1251 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A |
1252 | |
1253 | .PHONY: clist hlist shlist pllist |
1254 | |
1255 | clist: $(c) |
1256 | echo $(c) | tr ' ' $(TRNL) >.clist |
1257 | |
1258 | hlist: $(h) |
1259 | echo $(h) | tr ' ' $(TRNL) >.hlist |
1260 | |
1261 | shlist: $(sh) |
1262 | echo $(sh) | tr ' ' $(TRNL) >.shlist |
1263 | |
1264 | pllist: $(pl) |
1265 | echo $(pl) | tr ' ' $(TRNL) >.pllist |
1266 | |
1267 | Makefile: Makefile.SH ./config.sh |
1268 | $(SHELL) Makefile.SH |
1269 | |
1270 | .PHONY: distcheck |
1271 | distcheck: FORCE |
1272 | perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()' |
1273 | |
1274 | .PHONY: elc |
1275 | elc: emacs/cperl-mode.elc |
1276 | |
1277 | emacs/cperl-mode.elc: emacs/cperl-mode.el |
1278 | -cd emacs; emacs -batch -q -no-site-file -f batch-byte-compile cperl-mode.el |
1279 | |
1280 | .PHONY: etags ctags tags |
1281 | |
1282 | etags: TAGS |
1283 | |
1284 | TAGS: emacs/cperl-mode.elc |
1285 | sh emacs/ptags |
1286 | |
1287 | # Let's hope make will not go into an infinite loop on case-unsensitive systems |
1288 | # This may also fail if . is in the head of the path, since perl will |
1289 | # require -Ilib |
1290 | tags: TAGS |
1291 | perl emacs/e2ctags.pl TAGS > tags |
1292 | |
1293 | ctags: |
1294 | ctags -f Tags -N --totals --languages=c --langmap=c:+.h --exclude=opmini.c *.c *.h |
1295 | |
1296 | # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE |
1297 | # If this runs make out of memory, delete /usr/include lines. |
1298 | !NO!SUBS! |
1299 | |
1300 | $eunicefix $Makefile |
1301 | case `pwd` in |
1302 | *SH) |
1303 | $rm -f ../$Makefile |
1304 | $ln $Makefile ../$Makefile |
1305 | ;; |
1306 | esac |
1307 | $rm -f $firstmakefile |
1308 | |
1309 | # Now do any special processing required before building. |
1310 | |
1311 | case "$ebcdic" in |
1312 | define) |
1313 | xxx='' |
1314 | echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2 |
1315 | case "$osname" in |
1316 | os390|posix-bc) |
1317 | if cd x2p |
1318 | then |
1319 | rm -f y.tab.c y.tab.h |
1320 | case "$osname" in |
1321 | posix-bc) |
1322 | # we are using two different yaccs in BS2000 Posix! |
1323 | byacc a2p.y >/dev/null 2>&1 |
1324 | ;; |
1325 | *) # e.g. os390 |
1326 | yacc a2p.y >/dev/null 2>&1 |
1327 | ;; |
1328 | esac |
1329 | if cmp -s y.tab.c a2p.c |
1330 | then |
1331 | rm -f y.tab.c |
1332 | else |
1333 | echo "a2p.y -> a2p.c" >&2 |
1334 | mv -f y.tab.c a2p.c |
1335 | chmod u+w a2p.c |
1336 | sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \ |
1337 | -e 's|^static void __YY_YACC_MAIN.*BS2000.*|/*static main deleted*/|' \ |
1338 | -e 's/y\.tab/a2p/g' a2p.c >a2p.tmp && mv a2p.tmp a2p.c |
1339 | xxx="$xxx a2p.c" |
1340 | fi |
1341 | # In case somebody yacc -d:ed the a2p.y. |
1342 | if test -f y.tab.h |
1343 | then |
1344 | if cmp -s y.tab.h a2p.h |
1345 | then |
1346 | rm -f y.tab.h |
1347 | else |
1348 | echo "a2p.h -> a2p.h" >&2 |
1349 | mv -f y.tab.h a2p.h |
1350 | xxx="$xxx a2p.h" |
1351 | fi |
1352 | fi |
1353 | cd .. |
1354 | fi |
1355 | ;; |
1356 | vmesa) |
1357 | # Do nothing in VM/ESA. |
1358 | ;; |
1359 | *) |
1360 | echo "'$osname' is an EBCDIC system I don't know that well." >&4 |
1361 | ;; |
1362 | esac |
1363 | case "$xxx" in |
1364 | '') echo "No parser files were regenerated. That's okay." >&2 ;; |
1365 | esac |
1366 | ;; |
1367 | esac |
1368 | |
1369 | # ex: set ts=8 sts=4 sw=4 noet: |